Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Automatic PAN/TILT calibration<br />
With this function you can calibrate the PAN/TILT movement to the correct starting position.<br />
Adjust dimming speed<br />
With this function you can adjust the dimming speed.<br />
Adjust PAN/TILT speed<br />
With this function you can define the PAN/TILT speed. You can select one of 4 different modes.<br />
Mic sensitivity<br />
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.<br />
Select “Mic sensitivity” by pressing Up or Down.<br />
Press Up or Down to select the desired sensitivity.<br />
Press the Enter-button to confirm.<br />
Press the Mode/Esc-button in order to return to the main menu.<br />
Service setting<br />
The password for this function is „050“.<br />
Adjust ventilation fans mode<br />
With this function, you can adjust the ventilation fans mode.<br />
Select "Fan Voltage" by pressing Up or Down.<br />
Press Enter to confirm; the display shows “LOW”.<br />
Press Up or Down to select “LOW“ or ”HIGH”.<br />
Press the Enter-button to confirm.<br />
Press the Mode/Esc-button in order to return to the main menu.<br />
Gobo rotation mode select<br />
With this function you can select the gobo rotation mode.<br />
Select "Gobo speed" by pressing Up or Down.<br />
Press Enter to confirm; the display shows “SLOW”.<br />
Press Up or Down to select “SLOW” or “QUICK”.<br />
Press the Enter-button to confirm.<br />
Press the Mode/Esc-button in order to return to the main menu.<br />
Adjust fan speed<br />
With this function you can adjust the fan voltage selected under ventilation fan mode even further. In this<br />
way, you can select „Auto fans speed“, „High fans speed“ and „Low fans speed“.<br />
Display close time<br />
With this function you can shut off the LED display after 1 to 59 minutes.<br />
Select temperature designation<br />
With this function you can select the temperature designation.<br />
Select “Temperature C/F” by pressing Up or Down.<br />
Press the Enter-button, the display shows “Celsius”.<br />
Press Up or Down to select the desired degree between “Celsius” and “Fahrenheit”.<br />
Press the Enter-button to confirm.<br />
Press the Mode/Esc-button in order to return to the main menu.<br />
Initial effect<br />
With this function, you can adjust with which value the respective channels will start.<br />
Reset function<br />
With this function you can reset the device via the Control Board. You can select the different Resetfunctions<br />
by pressing Up or Down.<br />
Restore factory settings<br />
With this function you can restore the factory settings of the device. All settings will be set back to the default<br />
values (shaded). Any edited scenes will be lost.<br />
57/62<br />
00033062.DOC, Version 1.0