ATH Pneumatischer Montagefinger Bedienungsanleitung

Notes for transport and storage:
- Lift up carefully, with suitable tools in a good condition.
- Avoid unexpected increases and jerks. Beware of bumps, crossbows, etc.
- Keep the removed packing parts at an ambulance inaccessible to children and animals until they are disposed of.
- Storage-Temperature: 0°C ~ +50 °C
INSTALLATION
Place of installation
It must be ensured that the operator can see from the operating position, the entire device and the environment.
The operator must prevent the entry of unauthorized persons in this area and remove objects which present hazards.
Permissible operating temperatures: 0-50 °C
Maximum permissible humidity:
10-90% (w/o condensing)
Height above sea level:
≤2000m
The installation of the auxiliary arm is not permitted in damp, wet or explosive rooms.
Montage
This manual is not to be seen as a set-up guide, only technical and expert fitters are given instructions and
assistance. Suitable clothing and individual protective equipment must be worn for the following work.
Incorrect installation and adjustments result in liability and guarantee exclusion.
1. Preparation:
a. Disconnect the machine from the compressed air supply and the electrical supply line
b. Ensure that the mounting machine is fixed to the ground according to the specifications.
c. Remove the existing mounting head (17) by removing the two front blade screws (15) and the lower
hexagonal screw (21), including the washer and spring washer
d. To reach the pneumatic cylinder, remove the top cover (8) by removing the fastening screws (6, 7, and 9)
with shims and spring washers.
© Copyright ATH-Heinl GmbH & Co. KG, 2013, All rights reserved / Printing errors and technical changings reserved / Version: 08/2013
5