ProAudio-RRMP-6911 - E2 Fachhandels & Reparatur Servicecenter ...

AUDIO SETTINGS, CONNECTIONS
Volume
• Set the desired volume by turning the volume control (21) on the device.
• To decrease the volume level, turn the volume control in the MIN direction.
• To increase the volume level, turn the volume control in the MAX direction.
• Warning: Extreme volume leads to permanent hearing loss from high acoustic pressure.
Bass function
• Regardless of the music genre this function amplifies the lower sounds (bass) so that they are also audible
at low volume.
• The bass function is only effective when play back audio files from CDs, from a USB storage device or from
a memory card.
• Set the DBBS switch (20) on the device to position ON in order to switch on the bass function.
• Set the DBBS switch to position OFF in order to switch off the bass function.
Connections
Headphone
• The device has a 3.5mm headphone jack (18). You can connect most standard earphones or headphones
(not included).
• If a headphone or earphone plug is connected to the headphone jack, the built-in speakers will automatically
be muted.
• As soon as the headphone or earphone plug is disconnected, the speakers will be activated.
USB memory
• Connect your USB memory stick to the USB slot (28) at the top side of the device.
SD/MMC memory card
• Connect your memory card with the memory card slot (29) at the top side of the device.
ProAudio-RRMP-6911-IM-DE-EN-V2.indb 31 11/08/2009 1:09 PM
31
ENGLISH