Installation and Use - Friedland

Weitere Magazine

Empfehlungen

Info

Portable VisioCam LCD Video Chime System Installation and Use Contents Features ......................................................... 3 The VisioCam system .................................... 3 Checking pack contents ................................ 3 Setting up ...................................................... 4 Pre-installation setup................................... 4 Installing the door camera ................................ 6 Door Camera Transformer option .................... 7 Installing the receiver ...................................... 8 Receiver Operation....................................... 8 Door camera ............................................... 9 Expanding your system ................................... 10 Maintenance and use...................................... 11 Care and Maintenance ................................ 11 Replacing the receiver batteries................... 11 Troubleshooting ........................................ 12 Specifi cations................................................ 13 Declaration............................................... 13 Disposal and Recycling ............................... 13 Guarantee ................................................ 12 This user guide applies to the following model numbers: VIS3322, VIS3322D VIS3121, VIS3121D VIS3222, VIS3222D VIS3x2x, VIS3x2xD G-1
Features Portable VisioCam LCD Video Chime System – Installation and Use Thank you for choosing this Friedland product. Please carry out the following the instructions to ensure correct installation and use, and keep these notes in a safe place for future reference. Before you fix the door camera or receiver in a permanent place, make sure that you have tested the two units and that the system works in the location you have chosen! (See ‘Setting up’, beginning on the next page.) THE VISIOCAM SYSTEM Your Friedland wireless video entry system uses radio signals to transmit a video picture of the caller from the door camera to the receiver. The system is expandable, so you can install additional surveillance cameras, or a second door camera if required. The system is also compatible with Friedland Evo and Friedland Décor door chimes, so that you can install an additional wire-free door chime in larger premises. See ‘Expanding Your System’ on page 9 for more details. Receiver features for use with future products (available mid-2006): ■ Scan button – enables the receiver to scan CCTV type cameras ■ Microphone volume – controls the audio level from cameras with a fitted microphone. CHECKING PACK CONTENTS The following items are included in the pack: ■ Door camera transmitter unit ■ Receiver unit with LCD display ■ Receiver charging base ■ AV SCART connection lead ■ Six No.8 screws for wall mounting ■ Six wall plugs. You will need: ■ 6 x AA alkaline batteries for the door camera ■ A No. 2 crosshead screwdriver ■ A 6mm dia. masonry drill ■ A large flat bladed screwdriver Door camera features Receiver features Infrared LEDs – allows the camera to ‘see in the dark’ in monochrome Camera lens – views callers Confidence light – illuminates when call button is pressed to reassure the caller that the unit is working Light sensor – detects ambient lighting and switches camera from colour to monochrome in low light Name plate – for displaying your name or other information Camera base – removes for wall mounting Movement sensor (PIR) Call button – activates the chime tune and camera G-2 Tune selection button – selects the chime tune for the door camera Tune selection button – for second camera/push AV socket – to connect to a TV set (optional) Chime flasher VISIOCAM Battery indicator Display – screens the camera image for approx. 30 seconds after the call button is pressed Scan Antenna – receives the signal from the camera MIC volume – for future use Display brightness Chime volume Scan button – looks for connected CCTV-type cameras [future Friedland product] English
Seite 1: g d n i Portable Visiocam LCD Video
Seite 5 und 6: Program the door camera into the re
Seite 7 und 8: Adjust the camera angle With the do
Seite 9 und 10: Chime tune selection The receiver c
Seite 11 und 12: Maintenance and use CARE AND MAINTE
Seite 13 und 14: Specifications Door Camera Receiver
Seite 15 und 16: Merkmale Tragbares LCD-Videoglocken
Seite 17 und 18: Die Türkamera in den Empfänger pr
Seite 19 und 20: Den Kamerawinkel ändern Wenn sich
Seite 21 und 22: Display-Helligkeit Türkamera durch
Seite 23 und 24: Wartung und Gebrauch PFLEGE UND WAR
Seite 25 und 26: Spezifikationen Türkamera Empfäng
Seite 27 und 28: Eigenschappen Mobiel video-deurbels
Seite 29 und 30: Programmeer de deurcamera in het hu
Seite 31 und 32: Camerahoek verstellen Het kan zijn
Seite 33 und 34: Deurgong knipperlicht Het licht kni
Seite 35 und 36: Onderhoud en gebruik ONDERHOUD ■
Seite 37 und 38: Specificaties Deurstation Huisstati
Seite 39 und 40: Caratteristiche Sistema di videocam
Seite 41 und 42: Programmare la videocamera nel rice
Seite 43 und 44: Regolare l’angolo di ripresa Con
Seite 45 und 46: Lampeggiante del campanello Lampegg
Seite 47 und 48: Uso e manutenzione CURA E MANUTENZI
Seite 49: Specifiche Videocamera Ricevitore R

Installation and Use - Friedland

Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.

Template löschen?

Als Template speichern?