Threaded Fasteners for plastic - Infastech
Threaded Fasteners for plastic - Infastech
Threaded Fasteners for plastic - Infastech
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Ideal <strong>for</strong> attaching soft materials,<br />
such as <strong>plastic</strong>s and elastomers, to a<br />
single thickness of sheet metal,<br />
Powergrip ® fasteners maintain the<br />
integrity of the soft material while<br />
providing resistance to strip-out and<br />
loosening.<br />
Sizes • M3 – M8 (#4 – 3/8")<br />
Thread Styles • Type CA threads are<br />
recommended <strong>for</strong> maximum thread<br />
engagement; others as required<br />
Head Styles • Hex washer, pan, round,<br />
truss, hex<br />
Drive Styles • TORX PLUS ® sPeciFicaTions<br />
Drive; also<br />
cross, slotted, and hex<br />
aPPlicaTions<br />
Soft materials such as <strong>plastic</strong>, rubber<br />
and elastomers to sheet metal<br />
PowergriP® <strong>Fasteners</strong> For layered assemblies<br />
speciallydesigned<br />
shoulder<br />
Powergrip Fastener<br />
serrations<br />
and<br />
undercut<br />
Key advanTages<br />
• Overcomes loosening in metal to <strong>plastic</strong>/elastomer<br />
applications<br />
• Prevents soft material from being crushed during assembly<br />
• Can be used in a variety of materials, soft or brittle, where<br />
there is a chance that cracking or crushing of the overlay<br />
material may occur<br />
FeaTures & beneFiTs<br />
Individually engineered to meet the unique requirements of<br />
each application<br />
• Can be used in a variety of materials, soft or brittle, where<br />
there is a chance that cracking or crushing of the overlay<br />
material may occur<br />
Specially designed shoulder designed to match the thickness<br />
of the soft material in each application<br />
• Prevents soft material from being crushed during assembly<br />
Serrations and a small undercut on the bottom of shoulder to<br />
decrease the distance between the last thread and the<br />
shoulder<br />
• Increases thread engagement<br />
• Increases strip-out resistance<br />
• Prevents vibration loosening<br />
• Increases torque resistance<br />
• Provides tight, uni<strong>for</strong>m joint<br />
Decorah Operations<br />
1-800-544-6117<br />
www.infastech.com<br />
Elco ® , iForm and <strong>Infastech</strong> are trademarks of <strong>Infastech</strong> Intellectual Properties Pte Ltd.<br />
TORX PLUS ® is a registered trademark of Acument Intellectural Properties LLC.<br />
Avdel ® is a registered trademark of Avdel UK Ltd.<br />
Plastite ® is a registered trademark of Research Engineering & Manufacturing Inc.<br />
©2011 <strong>Infastech</strong> Intellectual Properties Pte Ltd. All rights reserved.<br />
27