download online catalogue as pdf

Recommendations

Info

Teach-in of a two-way reflective barrier For configuration of a window Place object at the near edge of the window (1) Press button T1 for approx. 3 seconds Then move the object to the far edge of the window (2) Then press button T1 once more for approx. 1 second Teach-in of an analogue characteristic or a window with two switching points NCC/NOC and rising/falling analogue characteristic curve can also be set using the teach-in buttons. The analogue sensors check the load connected to the output and then automatically switch to 4–20 mA current output or 0–10 V voltage output to ensure maximum ease of handling. LinkControl optionally permits the extensive parameterisation of lcs+ ultrasonic sensors. The LCA-2 LinkControl adapter available as an accessory can be used to connect lcs+ sensors to the PC Sensor connected to the PC via LCA-2 for programming Easy to synchronise permits the simultaneous use of multiple mic sensors in an application. To avoid mutual interference, the sensors can be synchronised with one another. To this end, all the sensors are to be electrically connected one to another with Pin 5. ::: lcs+ ultrasonic sensors :::
Synchronisation using Pin 5 If more than 10 sensors must be synchronised, this can be carried out with the SyncBox1, available as an accessory. In instances of where a number of sensors are run at an IO-Link master, then the master's function is to assume synchronisation (Pin 5 must not be wired under IO-Link operations). ::: lcs+ ultrasonic sensors :::
Page 1 and 2:
Online catalogue Current to: 2013-0
Page 3 and 4:
Our ultrasonic expertise gives you
Page 5 and 6:
::: Ultrasonic principle ::: Ruby r
Page 7 and 8:
The window mode is an extension of
Page 9 and 10:
The right solution for every applic
Page 11 and 12:
::: Applications ::: Quality contro
Page 13 and 14:
::: Applications ::: Detecting obst
Page 15 and 16:
The mounting distances should be re
Page 17 and 18:
Detection zones The detection zones
Page 19 and 20:
0,25 m 30 mm blind zone 250 mm oper
Page 21 and 22:
The right solution for every applic
Page 23 and 24:
::: References ::: pico pico-usp us
Page 25 and 26:
Description The mic+ sensor family
Page 27 and 28:
Teach-in of a detect point For the
Page 29 and 30:
mic+25/D/TC scale drawing detection
Page 31 and 32:
mic+25/DD/TC scale drawing detectio
Page 33 and 34:
mic+25/IU/TC scale drawing detectio
Page 35 and 36:
mic+25/DIU/TC scale drawing detecti
Page 37 and 38:
mic+25/E/TC scale drawing detection
Page 39 and 40:
mic+25/EE/TC scale drawing detectio
Page 41 and 42:
mic+35/D/TC scale drawing detection
Page 43 and 44:
mic+35/DD/TC scale drawing detectio
Page 45 and 46:
mic+35/IU/TC scale drawing detectio
Page 47 and 48:
mic+35/DIU/TC scale drawing detecti
Page 49 and 50:
mic+35/E/TC scale drawing detection
Page 51 and 52:
mic+35/EE/TC scale drawing detectio
Page 53 and 54:
mic+130/D/TC scale drawing detectio
Page 55 and 56:
mic+130/DD/TC scale drawing detecti
Page 57 and 58:
mic+130/IU/TC scale drawing detecti
Page 59 and 60:
mic+130/DIU/TC scale drawing detect
Page 61 and 62:
mic+130/E/TC scale drawing detectio
Page 63 and 64:
mic+130/EE/TC scale drawing detecti
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
These completely metal mic sensors
Page 91 and 92:
Teach-in of a two-way reflective ba
Page 93 and 94:
mic-25/D/M scale drawing detection
Page 95 and 96:
mic-25/IU/M scale drawing detection
Page 97 and 98:
Page 99 and 100:
mic-35/IU/M scale drawing detection
Page 101 and 102:
Page 103 and 104:
mic-130/IU/M scale drawing detectio
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
The vnp sensors extend the mic+ sen
Page 115 and 116:
Configuration procedure for a vnp s
Page 117 and 118:
vnp-25/DD/TC outputs output 1 switc
Page 119 and 120:
vnp-25/IU/TC outputs output 1 analo
Page 121 and 122:
vnp-35/DD/TC outputs output 1 switc
Page 123 and 124:
vnp-35/IU/TC outputs output 1 analo
Page 125 and 126:
vnp-130/DD/TC outputs output 1 swit
Page 127 and 128:
vnp-130/IU/TC outputs output 1 anal
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Description The pico+ ultrasonic se
Page 139 and 140:
Synchronisation using Pin 5 If more
Page 141 and 142:
The advantages of IO IO-Link: Link:
Page 143 and 144:
pico+25/F outputs output 1 switchin
Page 145 and 146:
pico+25/WK/F outputs output 1 switc
Page 147 and 148:
pico+35/F outputs output 1 switchin
Page 149 and 150: pico+35/WK/F outputs output 1 switc
Page 151 and 152: pico+100/F outputs output 1 switchi
Page 153 and 154: pico+100/WK/F outputs output 1 swit
Page 155 and 156: pico+25/I outputs output 1 analogue
Page 157 and 158: pico+25/WK/I outputs output 1 analo
Page 159 and 160: pico+25/U outputs output 1 analogue
Page 161 and 162: pico+25/WK/U outputs output 1 analo
Page 163 and 164: pico+35/I outputs output 1 analogue
Page 165 and 166: pico+35/WK/I outputs output 1 analo
Page 167 and 168: pico+35/U outputs output 1 analogue
Page 169 and 170: pico+35/WK/U outputs output 1 analo
Page 171 and 172: pico+100/I outputs output 1 analogu
Page 173 and 174: pico+100/WK/I outputs output 1 anal
Page 175 and 176: pico+100/U outputs output 1 analogu
Page 177 and 178: pico+100/WK/U outputs output 1 anal
Page 179 and 180: pico+15/F outputs output 1 switchin
Page 181 and 182: pico+15/WK/F outputs output 1 switc
Page 183 and 184: Description The sensors of the lpc
Page 185 and 186: - disconnecting the sensors’ supp
Page 187 and 188: lpc-25/CDD/M18 outputs output 1 swi
Page 189 and 190: lpc-25/CEE/M18 outputs output 1 swi
Page 191 and 192: lpc-25/CDU/M18 outputs output 1 ana
Page 193 and 194: lpc-25/CDI/M18 outputs output 1 ana
Page 195 and 196: lpc-25/CI/M18 outputs output 1 anal
Page 197 and 198: lpc-25/CU/M18 outputs output 1 anal
Page 199: Description The lcs+ ultrasonic sen
Page 203 and 204: into the device itself Push-Pull ou
Page 205 and 206: lcs+600/F outputs output 1 switchin
Page 207 and 208: lcs+600/IU outputs output 1 analogu
Page 209 and 210: lcs+600/FD outputs output 1 switchi
Page 211 and 212: Description The lcs sensors have a
Page 213 and 214: synchronised with one another. To d
Page 215 and 216: lcs-25/DD/QP outputs output 1 switc
Page 217 and 218: lcs-25/IU/QP outputs output 1 analo
Page 219 and 220: lcs-25/DDD/QP outputs output 1 swit
Page 221 and 222: lcs-35/DD/QP outputs output 1 switc
Page 223 and 224: lcs-35/IU/QP outputs output 1 analo
Page 225 and 226: lcs-35/DDD/QP outputs output 1 swit
Page 227 and 228: lcs-130/DD/QP outputs output 1 swit
Page 229 and 230: lcs-130/IU/QP outputs output 1 anal
Page 231 and 232: lcs-130/DDD/QP outputs output 1 swi
Page 233 and 234: Description The compact sensor hous
Page 235 and 236: High counting frequencies, short re
Page 237 and 238: zws-15/CD/QS scale drawing detectio
Page 239 and 240: zws-15/CE/QS scale drawing detectio
Page 241 and 242: zws-15/CI/QS scale drawing detectio
Page 243 and 244: zws-15/CU/QS scale drawing detectio
Page 245 and 246: zws-24/CD/QS scale drawing detectio
Page 247 and 248: zws-24/CE/QS scale drawing detectio
Page 249 and 250: zws-24/CI/QS scale drawing detectio
Page 251 and 252:
zws-24/CU/QS scale drawing detectio
Page 253 and 254:
zws-70/CD/QS scale drawing detectio
Page 255 and 256:
zws-70/CE/QS scale drawing detectio
Page 257 and 258:
zws-70/CU/QS scale drawing detectio
Page 259 and 260:
zws-70/CI/QS scale drawing detectio
Page 261 and 262:
zws-7/CD/QS scale drawing detection
Page 263 and 264:
zws-25/CD/QS scale drawing detectio
Page 265 and 266:
zws-25/CE/QS scale drawing detectio
Page 267 and 268:
zws-7/CE/QS scale drawing detection
Page 269 and 270:
Our "smallest sensor": The sks sens
Page 271 and 272:
Teach-in of a detect point A two tw
Page 273 and 274:
sks-15/D scale drawing detection zo
Page 275 and 276:
sks-15/CD scale drawing detection z
Page 277 and 278:
sks-15/E scale drawing detection zo
Page 279 and 280:
sks-15/CE scale drawing detection z
Page 281 and 282:
The ucs sensors in a sturdy metal h
Page 283 and 284:
Teach-in of a two-way reflective ba
Page 285 and 286:
ucs-15/CDD/QM scale drawing detecti
Page 287 and 288:
ucs-15/CEE/QM scale drawing detecti
Page 289 and 290:
ucs-24/CDD/QM scale drawing detecti
Page 291 and 292:
ucs-24/CEE/QM scale drawing detecti
Page 293 and 294:
Wear-resistant PEEK film protects t
Page 295 and 296:
or laptop with all conventional Win
Page 297 and 298:
crm+35/D/TC/E outputs output 1 swit
Page 299 and 300:
crm+35/DD/TC/E outputs output 1 swi
Page 301 and 302:
crm+35/IU/TC/E outputs output 1 ana
Page 303 and 304:
crm+130/D/TC/E outputs output 1 swi
Page 305 and 306:
crm+130/DD/TC/E outputs output 1 sw
Page 307 and 308:
crm+130/IU/TC/E outputs output 1 an
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
crm+25/IU/TC/E outputs output 1 ana
Page 323 and 324:
crm+25/DD/TC/E outputs output 1 swi
Page 325 and 326:
crm+25/D/TC/E outputs output 1 swit
Page 327 and 328:
Description For fill level measurem
Page 329 and 330:
hps+25/DIU/TC/E/G1 scale drawing de
Page 331 and 332:
hps+35/DIU/TC/E/G1 scale drawing de
Page 333 and 334:
hps+130/DIU/TC/E/G1 scale drawing d
Page 335 and 336:
hps+340/DIU/TC/E/G2 scale drawing d
Page 337 and 338:
hps+340/DIU/TC/G2 scale drawing det
Page 339 and 340:
hps+25/DD/TC/E/G1 scale drawing det
Page 341 and 342:
hps+35/DD/TC/E/G1 scale drawing det
Page 343 and 344:
hps+130/DD/TC/E/G1 scale drawing de
Page 345 and 346:
hps+340/DD/TC/E/G2 scale drawing de
Page 347 and 348:
hps+340/DD/TC/G2 scale drawing dete
Page 349 and 350:
The wms sensors are designed for us
Page 351 and 352:
wms-35/RT scale drawing detection z
Page 353 and 354:
wms-130/RT scale drawing detection
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
wms-25/RT/HV/M18 scale drawing dete
Page 361 and 362:
The new ultrasonic double sheet con
Page 363 and 364:
Paper, Film, Sheet material The mou
Page 365 and 366:
Support through LinkControl dbk+4 c
Page 367 and 368:
dbk+4/3CDD/M18 E+S scale drawing de
Page 369 and 370:
dbk+4/WK/3CDD/M18 E+S scale drawing
Page 371 and 372:
dbk+4/M18/3CDD/M18 E+S scale drawin
Page 373 and 374:
dbk+4/M12/3CDD/M18 E+S scale drawin
Page 375 and 376:
dbk+4/Empf/3CDD/M18 scale drawing d
Page 377 and 378:
dbk+4/Sender/M18/K1 scale drawing d
Page 379 and 380:
dbk+4/Empf/WK/3CDD/ M18 scale drawi
Page 381 and 382:
dbk+4/Empf/M18/3CDD/ M18 scale draw
Page 383 and 384:
dbk+4/Empf/M12/3CDD/ M18 scale draw
Page 385 and 386:
dbk+4/Sender/ M12/K1 scale drawing
Page 387 and 388:
dbk+4/3BEE/M18 E+S scale drawing de
Page 389 and 390:
dbk+4/Empf/3BEE/M18 scale drawing d
Page 391 and 392:
dbk+4/WK/3BEE/M18 E+S scale drawing
Page 393 and 394:
dbk+4/Empf/WK/3BEE/ M18 scale drawi
Page 395 and 396:
dbk+4/M18/3BEE/M18 E+S scale drawin
Page 397 and 398:
dbk+4/Empf/M18/3BEE/ M18 scale draw
Page 399 and 400:
dbk+4/M12/3BEE/M18 E+S scale drawin
Page 401 and 402:
dbk+4/Empf/M12/3BEE/ M18 scale draw
Page 403 and 404:
The dbk+5 extends the area of appli
Page 405 and 406:
dbk+5/3CDD/M18 E+S scale drawing de
Page 407 and 408:
dbk+5/Empf/3CDD/M18 scale drawing d
Page 409 and 410:
Page 411 and 412:
dbk+5/3BEE/M18 E+S scale drawing de
Page 413 and 414:
dbk+5/Empf/3BEE/M18 scale drawing d
Page 415 and 416:
Page 417 and 418:
esp-4: Label and splice sensor comp
Page 419 and 420:
esp-4 as thread sensor B) Separate
Page 421 and 422:
esp-4/3CDD/M18 E+S outputs output 1
Page 423 and 424:
esp-4/Empf/3CDD/M18 outputs output
Page 425 and 426:
esp-4/M12/3CDD/M18 E+S outputs outp
Page 427 and 428:
esp-4/Empf/M12/3CDD/ M18 outputs ou
Page 429 and 430:
Description The functional principl
Page 431 and 432:
esf-1/CDF scale drawing detection z
Page 433 and 434:
esf-1/CF scale drawing detection zo
Page 435 and 436:
The bks+ edge sensor facilitates th
Page 437 and 438:
Keep your eyes open in data communi
Page 439 and 440:
ks+3/FIU scale drawing detection zo
Page 441 and 442:
ks+6/FIU scale drawing detection zo
Page 443 and 444:
The bks edge sensor facilitates the
Page 445 and 446:
ks-3/CIU scale drawing detection zo
Page 447 and 448:
The LCA-2 facilitates the comfortab
Page 449 and 450:
USB interface for PC connection Off
Page 451 and 452:
LCA-2 scale drawing detection zone
Page 453 and 454:
LCA-2 Koffer scale drawing detectio
Page 455 and 456:
Ultrasound - is everything conceiva
Page 457 and 458:
D-64560 Riedstadt telephone: 0 61 5
Page 459 and 460:
Norway Primatec as Lillesandsveien
Page 461 and 462:
America Right around the world, com
Page 463 and 464:
telefax: +82 2 21 94-33 97 internet
Page 465 and 466:
Oceania Right around the world, com
show all

download online catalogue as pdf

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?