Leica Viva Series Technical Reference Manual - PRISM-Surveying ...

Configuration,
Quality control page
Field Option Description
Use a different
chainage increment
on curves
Next step
Page changes to the Quality control page.
This page is only available for staking operations.
Description of fields
Check box Option to use a different chainage increment along a
curve.
Increment Editable field Available when Use a different chainage increment
on curves is checked. Chainage increment to be used
along the small radius curve.
For radius
under
Editable field Available when Use a different chainage increment
on curves is checked. Defines the threshold value of
a small radius curve. For example, a curve with a
radius smaller than this value, uses the chainage
increment defined in the following field.
Field Option Description
Check distance
before storing
Check box Allows a check to be made on the horizontal coordinate
difference between the staked point and the
point to be staked. If the defined Limit is exceeded,
the stakeout can be repeated, skipped or stored.
Limit Editable field Sets the maximum horizontal coordinate difference
which is accepted in the position check.
Viva Series, Reference Line 1029