Leica Viva Series Technical Reference Manual - PRISM-Surveying ...

More documents

Recommendations

Info

46.3.4 Measuring Local Lines without Centrelines Graphical overview Roads - Stakeout Roads - As built check Road_085 b a e d Stakeout of Roundabout a) Position to stake out b) Line to stake out c) Centreline of the layer- is not used for the local line d) Chainage e) ∆ chainage f) ∆ offset g) ∆ height c f Checking a Roundabout a) Line to check b) Chainage c) Centreline of the layer- is not used for the local line d) ∆ offset e) ∆ height Viva Series, Roads - Road 1404 g Road_084 a b c d e
Description This process is different to lines, where the stake/check is always relative to the centreline defined for the layer. Local lines no longer have a relationship to an overall centreline. Local lines are used to check roundabouts, parking bays, subdivision works and any other type of lines. The different lines to stake/check can be stored within one layer, which does not require a defined centreline. This ability is different to the stake/check of any other type which always require a centreline. Required elements A 2D or 3D design of the line to stake/check is required. Viva Series, Roads - Road 1405
Page 1 and 2:
Version 4.0 English Leica Viva Seri
Page 3 and 4:
Validity of this manual • This ma
Page 5 and 6:
Table of Contents In this manual Ch
Page 7 and 8:
7.4.2 Creating/Editing a Code 147 7
Page 9 and 10:
12.1.4 Editing an Existing RTK Prof
Page 11 and 12:
18.13 Total Station 408 18.14 GSI O
Page 13 and 14:
23 Instrument - TPS camera settings
Page 15 and 16:
29.7.1 Overview 641 29.7.2 Configur
Page 17 and 18:
34.3 Using the Calculator 748 34.3.
Page 19 and 20:
39.9.2 Manually Entered 917 39.9.3
Page 21 and 22:
43.7 Measuring Points to a Referenc
Page 23 and 24:
45.4.3 Inserting/Editing an Element
Page 25 and 26:
46.4.13 Re-initialise search 1446 4
Page 27 and 28:
50.3 Configuring Setup 1594 50.4 Se
Page 29 and 30:
57.2 Hidden Point Methods 1735 57.2
Page 31 and 32:
Appendix B Internal Memory 1850 App
Page 33 and 34:
1 Configurable Keys 1.1 Hot Keys
Page 35 and 36:
1.2 Favourites Key Description �
Page 37 and 38:
2 TPS Settings 2.1 Leica TPS Favour
Page 39 and 40:
Description of options Icon Descrip
Page 41 and 42:
2.2 Check Point Description This sc
Page 43 and 44:
Field Option Description Height dif
Page 45 and 46:
Description of fields Field Option
Page 47 and 48:
Turn Instrument to Hz/V, Relative p
Page 49 and 50:
2.5 Orientation With Compass Descri
Page 51 and 52:
2.6 Using the Digital Camera Taking
Page 53 and 54:
Leica GPS Favourites The appearance
Page 55 and 56:
Icon Description Camera To begin th
Page 57 and 58:
Description of the main menu functi
Page 59 and 60:
Key Description OK To start the hig
Page 61 and 62:
Next step Key Description OK To sel
Page 63 and 64:
Next step Key Description OK To sel
Page 65 and 66:
4.5 User Description User is availa
Page 67 and 68:
5 Jobs & Data - Jobs 5.1 Overview D
Page 69 and 70:
Page 71 and 72:
Key Description �The default valu
Page 73 and 74:
Field Option Description Average Co
Page 75 and 76:
Key Description Page To change to a
Page 77 and 78:
Additional calculation method for t
Page 79 and 80:
Job Properties:, Codelist page Key
Page 81 and 82:
Job Properties:, CAD files page Key
Page 83 and 84:
CAD Layers Next step IF you want to
Page 85 and 86:
5.4 Choosing a Job Access • For a
Page 87 and 88:
5.5 Managing Job Codes Description
Page 89 and 90:
Edit Code Next step IF THEN the job
Page 91 and 92:
6 Jobs & Data - Data 6.1 Overview D
Page 93 and 94:
Key Description More To display inf
Page 95 and 96:
Page 97 and 98:
6.3 Point Management 6.3.1 Creating
Page 99 and 100:
New Point, Code page Next step Page
Page 101 and 102:
� Field Option Description Attrib
Page 103 and 104:
Key Description Store To store the
Page 105 and 106:
Edit Point:, RTK info page Availabl
Page 107 and 108:
Edit Point:, Code page Field Option
Page 109 and 110:
6.3.3 Mean Page Description In orde
Page 111 and 112:
Access step-by-step The Mean page c
Page 113 and 114:
Key Description More To change betw
Page 115 and 116:
6.4 Line/Area Management 6.4.1 Over
Page 117 and 118:
Page 119 and 120:
Key Description Last To recall the
Page 121 and 122:
Creating lines/areas most efficient
Page 123 and 124:
Page 125 and 126:
Edit Line, Code page Key Descriptio
Page 127 and 128:
Key Description OK To close the scr
Page 129 and 130:
Sorts & Filters, Points page The av
Page 131 and 132:
Field Option Description Box around
Page 133 and 134:
Field Option Description Distance t
Page 135 and 136:
Page 137 and 138:
Key Description OK To close the scr
Page 139 and 140:
Page 141 and 142:
7.2 Accessing Codelist Management A
Page 143 and 144:
7.3 Creating/Editing a Codelist Acc
Page 145 and 146:
7.4 Managing Codes 7.4.1 Accessing
Page 147 and 148:
7.4.2 Creating/Editing a Code �
Page 149 and 150:
Field Option Description Linework S
Page 151 and 152:
Key Description New.. To create a n
Page 153 and 154:
� Default coordinate systems Acti
Page 155 and 156:
Key Description New.. To create a c
Page 157 and 158:
New Coordinate System or Edit Coord
Page 159 and 160:
8.4 Transformations 8.4.1 Accessing
Page 161 and 162:
8.4.2 Creating/Editing a Transforma
Page 163 and 164:
8.5 Ellipsoids 8.5.1 Accessing Elli
Page 165 and 166:
8.6 Projections 8.6.1 Accessing Pro
Page 167 and 168:
Column Option Description Oblique M
Page 169 and 170:
Field Option Description Type Selec
Page 171 and 172:
8.7.2 Accessing Geoid Model Managem
Page 173 and 174:
8.7.3 Creating a New Geoid Model fr
Page 175 and 176:
9 Jobs & Data - Import data 9.1 Ove
Page 177 and 178:
Format Characteristic Specialities
Page 179 and 180:
Key Description Fn Quit To exit the
Page 181 and 182:
Configuration Key Description OK To
Page 183 and 184:
Configuration (GSI) Description of
Page 185 and 186:
Key Description OK To import the da
Page 187 and 188:
Configuration This screen is availa
Page 189 and 190:
IF THEN a single line is to be sele
Page 191 and 192:
Select Layers to Import, for DXF Ro
Page 193 and 194:
9.4 Importing Data in DXF Format Re
Page 195 and 196:
Field Option Description Height to
Page 197 and 198:
Description of fields Next step Con
Page 199 and 200:
Format Characteristic Specialities:
Page 201 and 202:
10.2 Exporting Data from a Job to a
Page 203 and 204:
Configuration Key Description OK To
Page 205 and 206:
Key Description Filter.. To define
Page 207 and 208:
Page 209 and 210:
� Configuration, DXF page Field O
Page 211 and 212:
Description of columns Column Descr
Page 213 and 214:
Next step OK returns to Configurati
Page 215 and 216:
Page 217 and 218:
� Configuration, LandXML page Fie
Page 219 and 220:
� Do not remove the data storage
Page 221 and 222:
Configuration for FBK, General page
Page 223 and 224:
Next step OK returns to Export FBK/
Page 225 and 226:
Copy Data Between Jobs Key Descript
Page 227 and 228:
11 Instrument - TPS settings 11.1 M
Page 229 and 230:
Page 231 and 232:
11.1.2 Targets Description Each pri
Page 233 and 234:
11.1.3 Creating/Editing a Target Ac
Page 235 and 236:
11.2 Prism search settings Descript
Page 237 and 238:
Prism Search Settings, PowerSearch
Page 239 and 240:
Prism Search Settings, Fine search
Page 241 and 242:
Key Description Fn PE To change Pre
Page 243 and 244:
Field Option Description Coefficien
Page 245 and 246:
Page 247 and 248:
TS_003 d5 d3 P3 P0 d1 P0 Station P1
Page 249 and 250:
� Offsets & Quality Control, Targ
Page 251 and 252:
11.6 Lights / Lights & accessories
Page 253 and 254:
Lights & Accessories, Lights page T
Page 255 and 256:
Lights & Accessories, V limit page
Page 257 and 258:
12 Instrument - GPS settings 12.1 R
Page 259 and 260:
12.1.2 Creating a New RTK Profile R
Page 261 and 262:
12.1.4 Editing an Existing RTK Prof
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Description of fields for the Exter
Page 271 and 272:
Key Description Fn Default To recal
Page 273 and 274:
Page 275 and 276:
12.4 Quality control Description Th
Page 277 and 278:
Field Option Description Automatica
Page 279 and 280:
Quality Control, Advanced page Desc
Page 281 and 282:
Field Option Description Baseline l
Page 283 and 284:
Real-Time Stop Criteria The paramet
Page 285 and 286:
12.5 Raw data logging Description L
Page 287 and 288:
Field Option Description Controller
Page 289 and 290:
13 Antenna Heights 13.1 Overview De
Page 291 and 292:
13.2 Mechanical Reference Planes, M
Page 293 and 294:
13.3 Determining Antenna Heights 13
Page 295 and 296:
Carrier and adapter dimensions GS_0
Page 297 and 298:
Next step • At the beginning of a
Page 299 and 300:
Vertical height reading The vertica
Page 301 and 302:
Vertical height reading The vertica
Page 303 and 304:
SmartStation setup GS_078 a b c a)
Page 305 and 306:
Next step IF connecting a THEN GS10
Page 307 and 308:
GS Connection Wizard - Step 3 This
Page 309 and 310:
15 Connections.. - TPS connection w
Page 311 and 312:
15.2 Connection Using Cable Descrip
Page 313 and 314:
15.3 Connection Using Bluetooth Des
Page 315 and 316:
Page 317 and 318:
15.5 Connection To Leica Legacy and
Page 319 and 320:
Instrument Settings Third party tot
Page 321 and 322:
16 Connections.. - CS connection wi
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Next step Make a selection, press N
Page 331 and 332:
Key Description OK To return to the
Page 333 and 334:
Internet Connection, Internet page
Page 335 and 336:
Field Option Description Device Dis
Page 337 and 338:
18.3 GPS Rover / Base Sensor Descri
Page 339 and 340:
Field Option Description Last used
Page 341 and 342:
Key Description OK To accept change
Page 343 and 344:
Field Option Description Prefix '@@
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Field Option Description Set 2DCQ t
Page 351 and 352:
Field Option Description None No he
Page 353 and 354:
Diagram d1 GS_052 P0 a d2 d5 b P0 K
Page 355 and 356:
18.6 Export Job Description The Exp
Page 357 and 358:
Page 359 and 360:
Key Description Search Available wh
Page 361 and 362:
Field Option Description Leica 4G T
Page 363 and 364:
Field Option Description • 1016:
Page 365 and 366:
Field Option Description RTCM 20,21
Page 367 and 368:
RTK Rover Settings, RTK base page N
Page 369 and 370:
Page 371 and 372:
RTK Rover Settings, Advanced page F
Page 373 and 374:
Field Option Description EGNOS (tes
Page 375 and 376:
Height Smoothing with high dynamic
Page 377 and 378:
18.7.2 Configuration with Digital C
Page 379 and 380:
Page 381 and 382:
18.8 Base RTK 1 / Base RTK 2 18.8.1
Page 383 and 384:
Page 385 and 386:
Field Option Description Messages t
Page 387 and 388:
18.9 NMEA 1 / NMEA 2 � � Unavai
Page 389 and 390:
Page 391 and 392:
NMEA Messages This screen shows the
Page 393 and 394:
Page 395 and 396:
Field Option Description Monitor CQ
Page 397 and 398:
18.10 Remote (OWI) � Unavailable
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
18.12 Event Input 1/Event Input 2
Page 405 and 406:
Field Option Description Informatio
Page 407 and 408:
Event input 1/ Event input 2, Notif
Page 409 and 410:
Key Description Cntrl.. Available f
Page 411 and 412:
18.14 GSI Output Description Each t
Page 413 and 414:
Field Option Description Use RS232
Page 415 and 416:
Example 1: GSI8 Each word has 16 ch
Page 417 and 418:
Output format - Pt,N,E,Ht,Date Pos.
Page 419 and 420:
Field Description N Fixed text (N)
Page 421 and 422:
18.15 Field Controller Connection D
Page 423 and 424:
Viva Series, Connections.. - All ot
Page 425 and 426:
Page 427 and 428:
19.1.2 Configuring a GSM Connection
Page 429 and 430:
GSM Dial-Up Connection, Sim codes p
Page 431 and 432:
19.1.3 Configuring a CDMA Connectio
Page 433 and 434:
Next step Fn Info changes to CDMA I
Page 435 and 436:
19.2 Modems Description For modems,
Page 437 and 438:
Page 439 and 440:
� If channel changing is to be us
Page 441 and 442:
Field Option Description Modulation
Page 443 and 444:
Page 445 and 446:
Key Description Fn Save To save the
Page 447 and 448:
19.6 Internet Description Internet
Page 449 and 450:
Mountpoint, General page Field Opti
Page 451 and 452:
Mountpoint, Miscell page Descriptio
Page 453 and 454:
Dial-up Connection List Key Descrip
Page 455 and 456:
Page 457 and 458:
Key Description OK To select the hi
Page 459 and 460:
New Server, NTRIP page Field Option
Page 461 and 462:
20.1.2 Digital Cellular Phones Desc
Page 463 and 464:
20.1.3 Modems Typical uses • To t
Page 465 and 466:
� Base and rover can both be equi
Page 467 and 468:
20.1.6 RS232 Standard RS232 Standar
Page 469 and 470:
Supported hidden point measurement
Page 471 and 472:
Supported GPRS / Internet devices S
Page 473 and 474:
Devices This screen may consist of
Page 475 and 476:
20.3 Creating/Editing a Device Desc
Page 477 and 478:
Next step IF the device is a THEN r
Page 479 and 480:
21 Instrument - Instrument status i
Page 481 and 482:
STATUS function Description Refer t
Page 483 and 484:
Description of fields Field Descrip
Page 485 and 486:
Key Description More To display inf
Page 487 and 488:
Satellite Tracking: GPS, Almanac pa
Page 489 and 490:
21.4 RTK data link status Descripti
Page 491 and 492:
RTK Data Link Status, Device page N
Page 493 and 494:
For radios Description of fields Th
Page 495 and 496:
Page 497 and 498:
Key Description OK To return to RTK
Page 499 and 500:
21.5 Current GPS position Descripti
Page 501 and 502:
Current GPS Position, Baseline page
Page 503 and 504:
Raw Data Logging Status, Point occu
Page 505 and 506:
Raw Data Logging Status, RTK base p
Page 507 and 508:
Page 509 and 510:
21.7.3 ASCII Input Description This
Page 511 and 512:
21.7.4 RTK Data Link Status Descrip
Page 513 and 514:
Description of fields Column Descri
Page 515 and 516:
Diagram 0 GS12_129 c c c a a a a b
Page 517 and 518:
21.9 TPS current station info Acces
Page 519 and 520:
22 Instrument - Base settings 22.1
Page 521 and 522:
Satellite Tracking Settings, Advanc
Page 523 and 524:
Field Option Description User defin
Page 525 and 526:
22.2 Base raw data logging � Unav
Page 527 and 528:
Field Option Description • For st
Page 529 and 530:
24 User - Work settings 24.1 ID tem
Page 531 and 532:
ID Template Library Next step ENTER
Page 533 and 534:
Default ID template Description Lin
Page 535 and 536:
Examples for incrementation Descrip
Page 537 and 538:
ID Increment by Next point ID Notes
Page 539 and 540:
Page 541 and 542:
Field Option Description Attribute
Page 543 and 544:
24.3 My Survey Screen Description D
Page 545 and 546:
Configure Page Key Description OK T
Page 547 and 548:
Field Option Description Backsight
Page 549 and 550:
Field Option Description Offset Inp
Page 551 and 552:
Field Option Description Temp dry E
Page 553 and 554:
Hot Keys & Favourites, GPS Fn+hot k
Page 555 and 556:
24.5 Prompt before storing Access S
Page 557 and 558:
Coding methods Coding method Charac
Page 559 and 560:
Coding method Characteristic Descri
Page 561 and 562:
Codes marked with * have attributes
Page 563 and 564:
Key Description OK To return to the
Page 565 and 566:
25.2.2 Thematical Coding without Co
Page 567 and 568:
Select Free Code All free codes fro
Page 569 and 570:
25.3.2 Free Coding with Direct Inpu
Page 571 and 572:
For point codes: • The point code
Page 573 and 574:
25.5.2 Configuring SmartCodes Acces
Page 575 and 576:
Field Option Description Direction
Page 577 and 578:
Field Option Description Use a stri
Page 579 and 580:
Page 581 and 582:
Copying a code block to a new job s
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Exporting code information To expor
Page 589 and 590:
� The linework flag can be used w
Page 591 and 592:
26.3 Performing Linework with Thema
Page 593 and 594:
� • The rover menu must be used
Page 595 and 596:
Step Field Description for thematic
Page 597 and 598:
27.2 Accessing the Working Style Wi
Page 599 and 600:
27.3 Choosing a Different Working S
Page 601 and 602:
27.5 Editing a Working Style Workin
Page 603 and 604:
28 User - System settings 28.1 Regi
Page 605 and 606:
Field Option Description +123456.78
Page 607 and 608:
Regional Settings, Angle page Descr
Page 609 and 610:
Field Option Description GPS direct
Page 611 and 612:
Regional Settings, Coords page Desc
Page 613 and 614:
Regional Settings, Others page Colu
Page 615 and 616:
28.2 SmartWorx options Description
Page 617 and 618:
28.3 Screen & audio Description The
Page 619 and 620:
Screen & Audio Settings, Text input
Page 621 and 622:
Admin Settings Wizard, What do you
Page 623 and 624:
29 User - Tools & other utilities 2
Page 625 and 626:
Field Option Description Format fil
Page 627 and 628:
Page 629 and 630:
29.3 Load licence keys Description
Page 631 and 632:
Field Option Description Upload key
Page 633 and 634:
� Supported file File extension D
Page 635 and 636:
Ftp: Transfer, Field page Field Opt
Page 637 and 638:
Ftp: Transfer, Office page The file
Page 639 and 640:
Page 641 and 642:
29.7 Leica Exchange 29.7.1 Overview
Page 643 and 644:
Leica Exchange Main Menu Field Opti
Page 645 and 646:
29.7.2 Configuring Leica Exchange A
Page 647 and 648:
Field Option Description Display fo
Page 649 and 650:
Select People to Send Data Descript
Page 651 and 652:
29.7.4 Getting Data Access Select M
Page 653 and 654:
29.7.5 Data Transfer Status Access
Page 655 and 656:
29.7.6 In the Office In the office
Page 657 and 658:
Precise measurements To get precise
Page 659 and 660:
30.2 Details on Instrument Errors D
Page 661 and 662:
Vertical index error (i) Compensato
Page 663 and 664:
� Summary of errors to be adjuste
Page 665 and 666:
30.4 Combined Adjustment (l, t, i,
Page 667 and 668:
Aim the telescope accurately at a t
Page 669 and 670:
Check & Adjust Wizard, It is recomm
Page 671 and 672:
Check & Adjust Wizard, Step 1 Key D
Page 673 and 674:
Check & Adjust Wizard, Step 2 Check
Page 675 and 676:
30.6 Compensator Adjustment (l, t)
Page 677 and 678:
Check & Adjust Wizard, Step 2 Check
Page 679 and 680:
30.7 Viewing the Current Values Acc
Page 681 and 682:
30.9 Adjusting the Circular Level o
Page 683 and 684:
30.10 Adjusting the Circular Level
Page 685 and 686:
Step Description 3. Switch on the l
Page 687 and 688:
31 User - About Leica Viva Access S
Page 689 and 690:
32 Camera & Imaging 32.1 Overview D
Page 691 and 692:
Camera & imaging workflow on the TS
Page 693 and 694:
Page 695 and 696:
Field Option Description Link image
Page 697 and 698:
Requirements • A TS11 I or TS15 I
Page 699 and 700:
Overview of keys, softkeys and touc
Page 701 and 702:
32.3.3 Within Applications Access I
Page 703 and 704:
In Setup In the setup application,
Page 705 and 706:
Camera View Settings, General page
Page 707 and 708:
Camera View Settings, Lines / areas
Page 709 and 710:
32.3.4 Screenshot Description A scr
Page 711 and 712:
Select Panoramic Image Type Panoram
Page 713 and 714:
32.4 Image Management � Access Da
Page 715 and 716:
Sorts & Filters, Images page Key De
Page 717 and 718:
Field Option Description Wide-angle
Page 719 and 720:
Overview of keys, softkeys and touc
Page 721 and 722:
32.5.2 Field Sketching Description
Page 723 and 724:
Sketch Pad Refer to "Overview of ke
Page 725 and 726:
33 TPS Functions 33.1 EDM Descripti
Page 727 and 728:
Automatic aiming measurement Automa
Page 729 and 730:
33.2.2 PowerSearch Description The
Page 731 and 732:
33.3 Follow Moving Prisms - Lock De
Page 733 and 734:
33.4 RCS Description The instrument
Page 735 and 736:
Using the EGL step-bystep Step Desc
Page 737 and 738:
33.7 Connection to Other Total Stat
Page 739 and 740:
33.7.2 Topcon Supported functions F
Page 741 and 742:
33.7.3 Sokkia Supported functions F
Page 743 and 744:
33.7.4 Nikon Supported functions Fu
Page 745 and 746:
34 Calculator 34.1 Accessing the Ca
Page 747 and 748:
Page 749 and 750:
Page 751 and 752:
Field Option Description DEG Degree
Page 753 and 754:
Description of softkeys First level
Page 755 and 756:
Key Description PI To insert X: 3.1
Page 757 and 758:
Fn to access the second level of fu
Page 759 and 760:
Configure the Internet interface St
Page 761 and 762:
Step Description 1. On the GPRS det
Page 763 and 764:
35.2 Using the NTRIP Service with a
Page 765 and 766:
Step Description 1. The Server to u
Page 767 and 768:
Step Description 1. If the selected
Page 769 and 770:
36.2 Accessing MapView Description
Page 771 and 772:
Map View Settings, Points page Fiel
Page 773 and 774:
Field Option Description Display ar
Page 775 and 776:
Map View Settings, CAD import page
Page 777 and 778:
Toolbar Point with focus Line/area
Page 779 and 780:
36.4.2 Keys, Softkeys and Toolbar D
Page 781 and 782:
Touch icon Key or Softkey Descripti
Page 783 and 784:
36.5 Selecting Points, Lines and Ar
Page 785 and 786:
36.6 Context Menu Access The contex
Page 787 and 788:
Option Available in Description Cle
Page 789 and 790:
Application Display Description COG
Page 791 and 792:
37 Tap Map Description Tap Map is a
Page 793 and 794:
Tap on a point Option Description T
Page 795 and 796:
Option Description Import For CAD p
Page 797 and 798:
Overview of touch icons in the draw
Page 799 and 800:
38 Applications - General Descripti
Page 801 and 802:
39 COGO 39.1 Overview Description C
Page 803 and 804:
39.2 Accessing COGO Access Select M
Page 805 and 806:
COGO calculation methods Descriptio
Page 807 and 808:
Page 809 and 810:
Configuration, TPS specific page Fi
Page 811 and 812:
Configuration, Report sheet page De
Page 813 and 814:
39.4 COGO Calculation - Inverse Met
Page 815 and 816:
Inverse methods Description Current
Page 817 and 818:
39.4.2 Point to Point and Current P
Page 819 and 820:
Page 821 and 822:
Inverse Point to Line/Inverse Curre
Page 823 and 824:
Inverse Result, Result page Field O
Page 825 and 826:
39.4.4 Point to Arc and Current Pos
Page 827 and 828:
Key Description Survy.. To manually
Page 829 and 830:
Inverse Result, Result page Next st
Page 831 and 832:
39.5 COGO Calculation - Traverse Me
Page 833 and 834:
COGO traverse calculation without o
Page 835 and 836:
Page 837 and 838:
Page 839 and 840:
39.6 COGO Calculation - Intersectio
Page 841 and 842:
Intersection methods Description Do
Page 843 and 844:
Intersection methods Description By
Page 845 and 846:
39.6.2 Intersection with Double Bea
Page 847 and 848:
Key Description Fn Modif.. To add,
Page 849 and 850:
Page 851 and 852:
Intersection Double Distance, Input
Page 853 and 854:
Intersection Result, Result 1/Resul
Page 855 and 856:
39.6.4 Intersection with Bearing -
Page 857 and 858:
Key Description Fn Modif.. To add,
Page 859 and 860:
Page 861 and 862:
Intersection By Points, Input page
Page 863 and 864:
Intersection Result, Result page Ke
Page 865 and 866:
39.6.6 Intersection with TPS Observ
Page 867 and 868:
Page 869 and 870:
Description of the Line/Arc methods
Page 871 and 872:
Line/Arc Methods Description Calcul
Page 873 and 874:
Line/Arc Methods Description Calcul
Page 875 and 876:
39.7.2 Arc Calculation Diagram for
Page 877 and 878:
Field Option Description 2 tngnts &
Page 879 and 880:
Calculations Input, Input page Desc
Page 881 and 882:
Next step On the Code page, type in
Page 883 and 884:
Create Line, Input page Key Descrip
Page 885 and 886:
Calculations Input, Input page Desc
Page 887 and 888:
Page 889 and 890:
39.7.4 Segment an Arc Exceptions to
Page 891 and 892:
Field Option Description No. of seg
Page 893 and 894:
Key Description OK To select a meth
Page 895 and 896:
Diagram The diagrams show the area
Page 897 and 898:
GS_013 P3 P2 d P0 P0 Point A of def
Page 899 and 900:
SYS13_007 P0 a P0 First new COGO po
Page 901 and 902:
Field Option Description Survey new
Page 903 and 904:
Page 905 and 906:
39.8.4 Results of the Area Division
Page 907 and 908:
Key Description Coord To view other
Page 909 and 910:
Description of the Shift, Rotate &
Page 911 and 912:
Point Selection Listed are points w
Page 913 and 914:
Select points by range Key Descript
Page 915 and 916:
Diagram SYS13_004 SYS13_005 a a P0
Page 917 and 918:
39.9.2 Manually Entered Computed Pa
Page 919 and 920:
Computed Parameters, Rotate page Fi
Page 921 and 922:
Field Option Description New distan
Page 923 and 924:
Field Option Description Store Poin
Page 925 and 926:
39.9.3 Matching Points Point Select
Page 927 and 928:
Match Points This screen provides a
Page 929 and 930:
Next step IF THEN the transformatio
Page 931 and 932:
Field Option Description Fix Parame
Page 933 and 934:
39.10 COGO Calculation - Angle Meth
Page 935 and 936:
39.11 COGO Calculation - Horizontal
Page 937 and 938:
Horizontal Curve Calculator, Result
Page 939 and 940:
39.12 COGO Calculation - Triangle M
Page 941 and 942:
COGO Triangle, Results page Key Des
Page 943 and 944:
Key Description View To view all ca
Page 945 and 946:
Page 947 and 948:
Example: Calculations for a distanc
Page 949 and 950:
Requirements for control points •
Page 951 and 952:
Field Option Description 3 These pr
Page 953 and 954:
Choose WGS84 & Local Jobs Key Descr
Page 955 and 956:
40.3 The Normal Method 40.3.1 Confi
Page 957 and 958:
40.3.2 Determining a New Coordinate
Page 959 and 960:
Choose System Components This scree
Page 961 and 962:
Matched Points (n) This screen prov
Page 963 and 964:
Column Description • For Onestep
Page 965 and 966:
Check Residuals Displays a list of
Page 967 and 968:
Store Coordinate System, Summary pa
Page 969 and 970:
Determine Coord System Description
Page 971 and 972:
IF the selected method is THEN Modi
Page 973 and 974:
40.3.4 Matching Points: Selecting/
Page 975 and 976:
40.3.5 Transformation Results for O
Page 977 and 978:
Transformation Results, Height page
Page 979 and 980:
Page 981 and 982:
40.4 The One Point Localisation Met
Page 983 and 984:
Choose System Components This scree
Page 985 and 986:
Key Description OK To confirm the s
Page 987 and 988:
Key Description Inv Available for M
Page 989 and 990:
Diagram for Onestep, Method: Conver
Page 991 and 992:
Page 993 and 994:
Field Option Description Grid SF Di
Page 995 and 996:
For Onestep Description of fields F
Page 997 and 998:
Page 999 and 1000:
Page 1001 and 1002:
Page 1003 and 1004:
Field Option Description Next step
Page 1005 and 1006:
Define Local Quickgrid Point Field
Page 1007 and 1008:
Field Option Description Ignore loc
Page 1009 and 1010:
Page 1011 and 1012:
Field Option Description Largest re
Page 1013 and 1014:
Field Option Description None No di
Page 1015 and 1016:
Point types Reference lines/arcs ca
Page 1017 and 1018:
TS_021 P0 P1 d1 d2 A reference arc
Page 1019 and 1020:
� It is possible to define an arc
Page 1021 and 1022:
42.2 Accessing Reference Line Acces
Page 1023 and 1024:
Choose Control Job Key Description
Page 1025 and 1026:
42.3 Configuring Reference Line Acc
Page 1027 and 1028:
Configuration, Key points page Fiel
Page 1029 and 1030:
Configuration, Quality control page
Page 1031 and 1032:
Configuration, Graphics page This p
Page 1033 and 1034:
Configuration, Report sheet page Fi
Page 1035 and 1036:
42.4 Choosing Reference Lines/Arcs
Page 1037 and 1038:
Page 1039 and 1040:
Field Option Description Second Poi
Page 1041 and 1042:
Manage Reference Lines/Manage Refer
Page 1043 and 1044:
42.4.4 Defining Reference Line/Arc
Page 1045 and 1046:
Slope Information to Show Next step
Page 1047 and 1048:
42.4.5 Defining Reference Line/Arc
Page 1049 and 1050:
Reference arc shifts d1 GS_019 TS_0
Page 1051 and 1052:
Field Option Description Shift line
Page 1053 and 1054:
Measure to line - vertical measurem
Page 1055 and 1056:
TS_028 Target point outside arc P0
Page 1057 and 1058:
Measure Points, Ref Line/Ref Arc pa
Page 1059 and 1060:
Key Description Fn Conect and Fn Di
Page 1061 and 1062:
For task Measure to line Descriptio
Page 1063 and 1064:
For task Measure to line, Height to
Page 1065 and 1066:
Stake to line - vertical measuremen
Page 1067 and 1068:
Stake to arc - vertical measurement
Page 1069 and 1070:
Page 1071 and 1072:
42.7 Gridstaking to a Reference Lin
Page 1073 and 1074:
d1 d3 P1 TS_035 Stake grid from arc
Page 1075 and 1076:
Define Grid to be Staked d1 P1 TS_0
Page 1077 and 1078:
Field Option Description Store poin
Page 1079 and 1080:
Page 1081 and 1082:
42.8 Staking to Alignment 42.8.1 Ov
Page 1083 and 1084:
42.8.2 Accessing Staking an Alignme
Page 1085 and 1086:
Alignment Report, Points page Lines
Page 1087 and 1088:
Page 1089 and 1090:
42.8.4 Staking Operation Descriptio
Page 1091 and 1092:
Page 1093 and 1094:
Field Option Description Go back Di
Page 1095 and 1096:
Page 1097 and 1098:
Defining a reference plane • TPS
Page 1099 and 1100:
Tilted plane Any number of points d
Page 1101 and 1102:
Horizontal plane The axes of the ho
Page 1103 and 1104:
Vertical plane The axes of the vert
Page 1105 and 1106:
43.2 Accessing Reference Plane & Gr
Page 1107 and 1108:
43.3 Creating a Reference Plane Fro
Page 1109 and 1110:
New Reference Plane, Points page
Page 1111 and 1112:
Ref Plane Coordinate System This sc
Page 1113 and 1114:
Offset of Reference Plane Key Descr
Page 1115 and 1116:
43.4 Selecting a Reference Plane fr
Page 1117 and 1118:
Key Description Fn About To display
Page 1119 and 1120:
Page 1121 and 1122:
Edit Reference Plane, Points page
Page 1123 and 1124:
Edit Reference Plane, Offset page N
Page 1125 and 1126:
43.7 Measuring Points to a Referenc
Page 1127 and 1128:
Next step Page changes to the Map p
Page 1129 and 1130:
Diagram TS_120 Known P0 Station Unk
Page 1131 and 1132:
Grid Scan Settings, Define start po
Page 1133 and 1134:
Grid Scan Status, Progress page Key
Page 1135 and 1136:
43.9 Grid Scan on Surface Descripti
Page 1137 and 1138:
Surface Scan Settings, Define grid
Page 1139 and 1140:
44 Roads - General 44.1 Overview
Page 1141 and 1142:
Name of subapplication Description
Page 1143 and 1144:
44.2 Jobs & Design Data 44.2.1 Acce
Page 1145 and 1146:
Field Option Description Rail job S
Page 1147 and 1148:
44.2.2 Working with a DTM Job Acces
Page 1149 and 1150:
44.2.3 Design Data Design data for
Page 1151 and 1152:
�� Lines are referenced by laye
Page 1153 and 1154:
Layers Tunnels generally consist of
Page 1155 and 1156:
Key Description Edit.. To edit the
Page 1157 and 1158:
Key Description Store To store data
Page 1159 and 1160:
Field Option Description Set start
Page 1161 and 1162:
Page 1163 and 1164:
Segment Info - Start Point/Segment
Page 1165 and 1166:
Segment Info - Start Point/Segment
Page 1167 and 1168:
Page 1169 and 1170:
Configuration, Design page Next ste
Page 1171 and 1172:
Field Option Description Yes (with
Page 1173 and 1174:
Field Option Description Project sc
Page 1175 and 1176:
Configuration, Rail design page Ava
Page 1177 and 1178:
Field Option Description CL height
Page 1179 and 1180:
Field Option Description Disable ch
Page 1181 and 1182:
Field Option Description Drilling r
Page 1183 and 1184:
Page 1185 and 1186:
Field Option Description Maximum he
Page 1187 and 1188:
Page 1189 and 1190:
Configuration, TPS page Description
Page 1191 and 1192:
Field Option Description �Dependi
Page 1193 and 1194:
Field Option Description Prompt bef
Page 1195 and 1196:
Page 1197 and 1198:
Field Description �If no defined
Page 1199 and 1200:
Field Description CL grade Grade of
Page 1201 and 1202:
Field Description Additnl line offs
Page 1203 and 1204:
Field Description Road_089 CL grade
Page 1205 and 1206:
44.3.4 Road Surface Grade - Info Pa
Page 1207 and 1208:
Field Description Camber The supere
Page 1209 and 1210:
Field Description Vertical sqr offs
Page 1211 and 1212:
44.3.5 Road Manual Slope, Local Man
Page 1213 and 1214:
Field Description Hinge ht diff Hei
Page 1215 and 1216:
Field Description Nearest hz tngnt
Page 1217 and 1218:
44.3.6 Road Crown - Info Page Avail
Page 1219 and 1220:
Field Description �If no defined
Page 1221 and 1222:
Field Description Defined northing
Page 1223 and 1224:
Field Description ∆ chainage Diff
Page 1225 and 1226:
Field Description Road_089 CL grade
Page 1227 and 1228:
44.3.8 Road DTM - Info Page � Ava
Page 1229 and 1230:
44.3.9 Rail - Info Page Available f
Page 1231 and 1232:
Field Description Current design ca
Page 1233 and 1234:
44.3.10 Tunnel - Info Page Availabl
Page 1235 and 1236:
Field Description Actual northing N
Page 1237 and 1238:
Step Description � Depending on t
Page 1239 and 1240:
Shift Settings, Horizontal shift/Ve
Page 1241 and 1242:
Field Option Description a) Chainag
Page 1243 and 1244:
Sign convention for shifts � The
Page 1245 and 1246:
Horizontal shift For surface grades
Page 1247 and 1248:
44.5 Tasks Description When staking
Page 1249 and 1250:
44.6 Understanding Terms and Expres
Page 1251 and 1252:
44.6.2 Road - Horizontal and Vertic
Page 1253 and 1254:
Lines The stake out of a line is us
Page 1255 and 1256:
A layer is a combination of lines t
Page 1257 and 1258:
Sign convention for stake offset an
Page 1259 and 1260:
Multiple chainage or station 8 9 10
Page 1261 and 1262:
44.6.6 Road - Working Corridor Desc
Page 1263 and 1264:
44.6.7 Road - Extension of the Cent
Page 1265 and 1266:
44.6.9 Rail - Working with a Single
Page 1267 and 1268:
Diagram - Section Two generic metho
Page 1269 and 1270:
Diagram - Section e Rail_005 c a) C
Page 1271 and 1272:
Left/right rail stakeout Descriptio
Page 1273 and 1274:
44.6.13 Tunnel - Basic Terms Terms
Page 1275 and 1276:
Superelevation Tunnel_003 a c b d a
Page 1277 and 1278:
Distance along profile By the dista
Page 1279 and 1280:
e scanned at a given forward and ba
Page 1281 and 1282:
44.6.15 Tunnel - Shifts Description
Page 1283 and 1284:
Design profile shift A shift can be
Page 1285 and 1286:
By adding a second point B to the p
Page 1287 and 1288:
45.2.2 Creating a New Alignment Acc
Page 1289 and 1290:
45.2.3 Modifying an Existing Alignm
Page 1291 and 1292:
45.2.4 Importing Alignment Data Acc
Page 1293 and 1294:
Next step OK imports the selected a
Page 1295 and 1296:
Alignment Editor Menu Description o
Page 1297 and 1298:
45.3 Configuring Alignment Editor A
Page 1299 and 1300:
Configuration, Advanced page Descri
Page 1301 and 1302:
45.4 Edit Horizontal Alignments Usi
Page 1303 and 1304:
45.4.2 Editing the Start Point Acce
Page 1305 and 1306:
Page 1307 and 1308:
Field Option Description For Elemen
Page 1309 and 1310:
Key Description Fn Config.. To acce
Page 1311 and 1312:
Field Option Description Radius Edi
Page 1313 and 1314:
Field Option Description End radius
Page 1315 and 1316:
Field Option Description Spiral out
Page 1317 and 1318:
Key Description Delete To delete th
Page 1319 and 1320:
Key Description Inv.. To calculate
Page 1321 and 1322:
For Element type at PI: Spiral Fiel
Page 1323 and 1324:
For Element type at PI: Spiral-Spir
Page 1325 and 1326:
45.6.2 Editing the Start Point Acce
Page 1327 and 1328:
Page 1329 and 1330:
Vertical Straight/Vertical Parabola
Page 1331 and 1332:
Field Option Description End chaina
Page 1333 and 1334:
For Element type: Curve Field Optio
Page 1335 and 1336:
45.7 Edit Vertical Alignments Using
Page 1337 and 1338:
Key Description Last.. To recall pr
Page 1339 and 1340:
45.8 Edit Cross Section Templates 4
Page 1341 and 1342:
45.8.2 Creating/Editing a Cross Sec
Page 1343 and 1344:
45.8.3 Add/Edit a Layer Access In N
Page 1345 and 1346:
Add Segment, Input page Key Descrip
Page 1347 and 1348:
Field Option Description Vertical d
Page 1349 and 1350:
Key Description Delete To delete a
Page 1351 and 1352:
Page 1353 and 1354: 45.10.2 Creating/Editing a Chainage
Page 1355 and 1356: Field Option Description Horiz & ve
Page 1357 and 1358: LEICA Geo Office can be found on th
Page 1359 and 1360: Key Description Fn Quit To exit the
Page 1361 and 1362: Define Task screen Key Description
Page 1363 and 1364: Field Option Description Line to us
Page 1365 and 1366: For Method to use: Surface grade Fi
Page 1367 and 1368: Field Option Description Use cut an
Page 1369 and 1370: Field Option Description For Method
Page 1371 and 1372: For Method to use: DTM, available f
Page 1373 and 1374: Lines The screen can have a Lines p
Page 1375 and 1376: Key Description For lines from Roa
Page 1377 and 1378: Description of fields Common to all
Page 1379 and 1380: Slope staking using Reference point
Page 1381 and 1382: Step Description 1. The first step
Page 1383 and 1384: The defined rail over ground should
Page 1385 and 1386: Workflow Step Description � The f
Page 1387 and 1388: Step Description � The first step
Page 1389 and 1390: 46.3 Staking/Checking the Road 46.3
Page 1391 and 1392: Description of fields Field Option
Page 1393 and 1394: Field Option Description Stake heig
Page 1395 and 1396: Understanding priorities of various
Page 1397 and 1398: Stake/Check screen, Info page Field
Page 1399 and 1400: The following information is shown:
Page 1401 and 1402: Description • When staking points
Page 1403: Description • Lines define variou
Page 1407 and 1408: Screen Points measured within an in
Page 1409 and 1410: Description • Surfaces such as th
Page 1411 and 1412: Description • Surfaces, such as t
Page 1413 and 1414: Required elements A 3D design of th
Page 1415 and 1416: 46.3.10 Measuring Digital Terrain M
Page 1417 and 1418: 46.4.2 Use heights from DTM Availab
Page 1419 and 1420: Field Option Description DTM layer
Page 1421 and 1422: 46.4.4 Get current angle to alignme
Page 1423 and 1424: 46.4.5 Stake individual point Avail
Page 1425 and 1426: Key Description Calc To perform the
Page 1427 and 1428: Configuration Description of fields
Page 1429 and 1430: Key Description Fn Config.. To conf
Page 1431 and 1432: Box / base definition Key Descripti
Page 1433 and 1434: Step Description 1. Define the base
Page 1435 and 1436: 46.4.9 Get current slope Availabili
Page 1437 and 1438: Field Option Description Relative t
Page 1439 and 1440: 46.4.10 Manual Slope Availability T
Page 1441 and 1442: 46.4.12 Shift reference line Availa
Page 1443 and 1444: Reference Shift Key Description OK
Page 1445 and 1446: The expanded element and the shifte
Page 1447 and 1448: After initialisation This screen sh
Page 1449 and 1450: Calculation of the stake intersecti
Page 1451 and 1452: Step Description 4. Height confirma
Page 1453 and 1454: Step Description �To stake furthe
Page 1455 and 1456:
Road_065 LEICA Geo Office LEICA Geo
Page 1457 and 1458:
47.1.3 Importing the Track Design w
Page 1459 and 1460:
Step Description 5. Selecting the j
Page 1461 and 1462:
Step Description • For a single t
Page 1463 and 1464:
Step Description The Rail Editor pr
Page 1465 and 1466:
Step Description Superelevation For
Page 1467 and 1468:
Step Description 9. Checking the tr
Page 1469 and 1470:
Step Description 11. Checking the s
Page 1471 and 1472:
� Refer to the Design to Field Us
Page 1473 and 1474:
47.2 Defining the Work Access 1) Se
Page 1475 and 1476:
Field Option Description Left rail
Page 1477 and 1478:
Checking points Besides checking po
Page 1479 and 1480:
Page 1481 and 1482:
Field Option Description • Positi
Page 1483 and 1484:
Field Option Description Cant right
Page 1485 and 1486:
Field Option Description Offsets Ma
Page 1487 and 1488:
Field Option Description When this
Page 1489 and 1490:
Stake Line, Stake page This page is
Page 1491 and 1492:
Stake Track/ Check Track, Info page
Page 1493 and 1494:
47.3.2 Offset Library Description T
Page 1495 and 1496:
47.3.3 Working with Pendular Displa
Page 1497 and 1498:
47.4.2 Use heights from DTM Availab
Page 1499 and 1500:
Field Option Description Show DTM o
Page 1501 and 1502:
47.4.4 Stake individual point Avail
Page 1503 and 1504:
Procedure Measuring the first point
Page 1505 and 1506:
48 Roads - Tunnel 48.1 Creating a N
Page 1507 and 1508:
48.1.3 Design Profiles Tunnel desig
Page 1509 and 1510:
Vertical or perpendicular profiles
Page 1511 and 1512:
48.2 Defining the Work Access 1) Se
Page 1513 and 1514:
Key Description OK To continue to t
Page 1515 and 1516:
Field Option Description Apply dril
Page 1517 and 1518:
For Method to use: Scan profile Fie
Page 1519 and 1520:
48.3 Staking/Checking the Tunnel 48
Page 1521 and 1522:
Scan profile, Scan area page Field
Page 1523 and 1524:
Page 1525 and 1526:
Stake face/Stake profile/Check prof
Page 1527 and 1528:
Field Option Description Dist from
Page 1529 and 1530:
Field Option Description Stake offs
Page 1531 and 1532:
Field Option Description For Tunnel
Page 1533 and 1534:
Stake face/Stake profile/Check prof
Page 1535 and 1536:
Given that it is likely that a degr
Page 1537 and 1538:
Second iteration This process is re
Page 1539 and 1540:
Drilling rig orientation step-by-st
Page 1541 and 1542:
48.3.3 Stake profile and Check prof
Page 1543 and 1544:
48.3.4 Scan profile Overview A tunn
Page 1545 and 1546:
Key Description OK To continue to S
Page 1547 and 1548:
Key Description OK To store the def
Page 1549 and 1550:
48.4 The Tools Menu 48.4.1 Profile
Page 1551 and 1552:
View at - Layer Name, Map page Key
Page 1553 and 1554:
Diagram TS_048 P0 P1 P2 P3 P4 Known
Page 1555 and 1556:
49.2 Sets of Angles 49.2.1 Accessin
Page 1557 and 1558:
Options Description Create a new gr
Page 1559 and 1560:
Page 1561 and 1562:
Configuration, Advanced page Next s
Page 1563 and 1564:
Field Option Description Format fil
Page 1565 and 1566:
New Point Group, General page Key D
Page 1567 and 1568:
New Point Group, Points page Key De
Page 1569 and 1570:
Page 1571 and 1572:
Page 1573 and 1574:
Page 1575 and 1576:
Description of fields Next step Mea
Page 1577 and 1578:
Page 1579 and 1580:
Column Description Use For Yes: The
Page 1581 and 1582:
Column Description Use For Yes: The
Page 1583 and 1584:
Column Description σ Hz angle Stan
Page 1585 and 1586:
Field Option Description Store Poin
Page 1587 and 1588:
Step Description • Define time wh
Page 1589 and 1590:
A screen displays a notice that mon
Page 1591 and 1592:
Setup types • Each setup method r
Page 1593 and 1594:
50.2 Accessing Setup Access Select
Page 1595 and 1596:
Page 1597 and 1598:
Configuration, Advanced page For Se
Page 1599 and 1600:
Page 1601 and 1602:
Page 1603 and 1604:
50.5 Enter Station Information Acce
Page 1605 and 1606:
Page 1607 and 1608:
Set Station Orientation, Orientatio
Page 1609 and 1610:
Field Option Description Computed d
Page 1611 and 1612:
Set Station Orientation, Station pa
Page 1613 and 1614:
50.7.2 Multiple backsights Requirem
Page 1615 and 1616:
Key Description GPS Applicable when
Page 1617 and 1618:
previous points or finish the setup
Page 1619 and 1620:
50.7.4 Resection Requirements The c
Page 1621 and 1622:
Define Station Ht & Axis Key Descri
Page 1623 and 1624:
50.8 Setup Results Description The
Page 1625 and 1626:
Field Option Description Δheight D
Page 1627 and 1628:
Key Description Set To set the orie
Page 1629 and 1630:
Station Results, Targets page This
Page 1631 and 1632:
Column Description Δ hz dist Can b
Page 1633 and 1634:
51 Stakeout 51.1 Overview Descripti
Page 1635 and 1636:
Point types It is possible to stake
Page 1637 and 1638:
51.2 Accessing Stakeout Access Sele
Page 1639 and 1640:
51.3 Configuring Stakeout Access Se
Page 1641 and 1642:
Field Option Description Only updat
Page 1643 and 1644:
Configuration, Heights page Descrip
Page 1645 and 1646:
Field Option Description To line (c
Page 1647 and 1648:
Page 1649 and 1650:
� This diagram shows an example N
Page 1651 and 1652:
Page 1653 and 1654:
Element Description Defined line Fr
Page 1655 and 1656:
Field Option Description Design hei
Page 1657 and 1658:
Key Description Store To accept the
Page 1659 and 1660:
51.6 Staking Out a DTM or Points &
Page 1661 and 1662:
� The stake out procedure is iden
Page 1663 and 1664:
Page 1665 and 1666:
52.2 Start base over last setup Des
Page 1667 and 1668:
53 Survey - General 53.1 Surveying
Page 1669 and 1670:
Key Description Fn Config.. To conf
Page 1671 and 1672:
Key Description Meas To start loggi
Page 1673 and 1674:
Field Option Description • For an
Page 1675 and 1676:
Next step Step Description 1. Meas
Page 1677 and 1678:
Page 1679 and 1680:
53.4.2 Initialise while Moving Init
Page 1681 and 1682:
53.4.4 Initialise on Known Point In
Page 1683 and 1684:
54 Survey - General Description The
Page 1685 and 1686:
Key Description Fn 2Store To aim ma
Page 1687 and 1688:
55 Survey - Auto Points 55.1 Overvi
Page 1689 and 1690:
55.2 Configuring Auto Points Access
Page 1691 and 1692:
Field Option Description Stop & go
Page 1693 and 1694:
Field Option Description Don't stor
Page 1695 and 1696:
Field Option Description 1st line D
Page 1697 and 1698:
Field Option Description Hz angle D
Page 1699 and 1700:
Field Option Description Quality 3D
Page 1701 and 1702:
55.3 Measuring Auto Points Requirem
Page 1703 and 1704:
Page 1705 and 1706:
Next step IF THEN auto points are t
Page 1707 and 1708:
Two auto points The configured offs
Page 1709 and 1710:
P3 TS_045 d1 P1 d2 P6 1 P4 P2 P7 P1
Page 1711 and 1712:
Page 1713 and 1714:
Page 1715 and 1716:
56 Survey Cross Section 56.1 Overvi
Page 1717 and 1718:
Coding of cross section elements Pr
Page 1719 and 1720:
Key Description OK To select the hi
Page 1721 and 1722:
Key Description Delete To delete th
Page 1723 and 1724:
Page 1725 and 1726:
Key Description Store Dist To store
Page 1727 and 1728:
Field Option Description x The numb
Page 1729 and 1730:
56.5 Configuring Survey Cross Secti
Page 1731 and 1732:
Field Option Description Attribute
Page 1733 and 1734:
� Hidden point measurement method
Page 1735 and 1736:
57.2 Hidden Point Methods 57.2.1 Be
Page 1737 and 1738:
57.2.3 Using 2 Distances Descriptio
Page 1739 and 1740:
57.2.5 Backwards Bearing & Distance
Page 1741 and 1742:
Key Description Sun Available when
Page 1743 and 1744:
Field Option Description Horiz dist
Page 1745 and 1746:
Page 1747 and 1748:
57.5 Computing an Azimuth 57.5.1 Us
Page 1749 and 1750:
57.5.2 Using Auxiliary Point Descri
Page 1751 and 1752:
Page 1753 and 1754:
Slope distance Key Description OK T
Page 1755 and 1756:
57.7 Hidden Point Measurement Inclu
Page 1757 and 1758:
Field Option Description Target hei
Page 1759 and 1760:
Properties of hidden points The pro
Page 1761 and 1762:
Key Description Meas To measure and
Page 1763 and 1764:
Hidden Point Result, Result page Ke
Page 1765 and 1766:
58.3 Configuring Hidden Point Acces
Page 1767 and 1768:
Next step OK returns to the screen
Page 1769 and 1770:
Properties of remote points Averagi
Page 1771 and 1772:
Key Description Fn IndivID and Fn R
Page 1773 and 1774:
59.3 Configuring Remote Point Acces
Page 1775 and 1776:
60 Traverse 60.1 Overview Descripti
Page 1777 and 1778:
60.2 Accessing Traverse Access Sele
Page 1779 and 1780:
60.3 Creating/Editing a Traverse Ac
Page 1781 and 1782:
60.4 Selecting an Existing Traverse
Page 1783 and 1784:
60.5 Traverse Data Description This
Page 1785 and 1786:
60.6 Configuring Traverse Access Se
Page 1787 and 1788:
Page 1789 and 1790:
60.7 Traverse Methods 60.7.1 Starti
Page 1791 and 1792:
60.7.2 Continuing an Existing Trave
Page 1793 and 1794:
60.7.3 Closing Traverse Close trave
Page 1795 and 1796:
Close traverse on internal referenc
Page 1797 and 1798:
60.7.4 Creating a Control Point fro
Page 1799 and 1800:
60.8 Traverse Point Results Descrip
Page 1801 and 1802:
Page 1803 and 1804:
IF accessed THEN • For a closed t
Page 1805 and 1806:
Page 1807 and 1808:
60.10 Traverse Adjustment 60.10.1 A
Page 1809 and 1810:
Field Option Description Transit ru
Page 1811 and 1812:
Page 1813 and 1814:
Adjustment Store Description of fie
Page 1815 and 1816:
Properties of measured points The p
Page 1817 and 1818:
Next step IF THEN a Volume Calculat
Page 1819 and 1820:
Next step Page changes to the first
Page 1821 and 1822:
Key Description Meas Stop Dist To s
Page 1823 and 1824:
Field Option Description Antenna he
Page 1825 and 1826:
61.4.3 Create a New Surface from Pr
Page 1827 and 1828:
Surface status, Points page Field O
Page 1829 and 1830:
61.4.4 Choosing an Existing Surface
Page 1831 and 1832:
61.4.6 Boundary Definition Edit Bou
Page 1833 and 1834:
Edit Boundary, Points page Key Desc
Page 1835 and 1836:
Boundary Tools Menu Description of
Page 1837 and 1838:
Field Option Description No. of tri
Page 1839 and 1840:
Page 1841 and 1842:
Appendix A Menu Tree Menu tree for
Page 1843 and 1844:
| |—— Roads.. | | | | | |——
Page 1845 and 1846:
| | | | | |—— Measure mode & ta
Page 1847 and 1848:
| |—— Work settings | | | |—
Page 1849 and 1850:
| |—— Satellite tracking | |—
Page 1851 and 1852:
Appendix C Directory Structure of t
Page 1853 and 1854:
|—— DOWNLOAD | • Various file
Page 1855 and 1856:
Sockets Pin Signal Name Function Di
Page 1857 and 1858:
Pin assignments for port P1 PIN_001
Page 1859 and 1860:
D.3 GS15 Description Some applicati
Page 1861 and 1862:
Sockets Pin Signal Name Function Di
Page 1863 and 1864:
Pin assignments for port P1 PIN_001
Page 1865 and 1866:
Pin assignments for port P4/E2 PIN_
Page 1867 and 1868:
Pin assignments for 8pin LEMO-1 PIN
Page 1869 and 1870:
D.7 TPS1200+ Description Some appli
Page 1871 and 1872:
Y cables Radio programming cables N
Page 1873 and 1874:
Serial data transfer cables Name De
Page 1875 and 1876:
USB data transfer cables Name Descr
Page 1877 and 1878:
E.2 TPS Cables Power cables Radio /
Page 1879 and 1880:
USB data transfer cables Name Descr
Page 1881 and 1882:
F.2 Symbols Used for Describing the
Page 1883 and 1884:
Symbol Field Description Example
Page 1885 and 1886:
F.3 GGA - Global Positioning System
Page 1887 and 1888:
F.4 GGK - Real-Time Position with D
Page 1889 and 1890:
F.5 GGK(PT) - Real-Time Position wi
Page 1891 and 1892:
F.6 GGQ - Real-Time Position with C
Page 1893 and 1894:
F.7 GLL - Geographic Position Latit
Page 1895 and 1896:
F.8 GNS - GNSS Fix Data Syntax $--G
Page 1897 and 1898:
F.9 GSA - GNSS DOP and Active Satel
Page 1899 and 1900:
F.10 GSV - GNSS Satellites in View
Page 1901 and 1902:
F.11 LLK - Leica Local Position and
Page 1903 and 1904:
F.12 LLQ - Leica Local Position and
Page 1905 and 1906:
F.13 RMC - Recommended Minimum Spec
Page 1907 and 1908:
F.14 VTG - Course Over Ground and G
Page 1909 and 1910:
F.15 ZDA - Time and Date Syntax $--
Page 1911 and 1912:
AT command Description AT+CBST= [ [
Page 1913 and 1914:
AT command Description AT+CPIN= [,]
Page 1915 and 1916:
Appendix I Event Input Notify Messa
Page 1917 and 1918:
Appendix J Glossary J.1 A A (parame
Page 1919 and 1920:
Attribute value regions The attribu
Page 1921 and 1922:
Class Characteristic Description In
Page 1923 and 1924:
Code group A code group allows code
Page 1925 and 1926:
Coordinate triplet A measured point
Page 1927 and 1928:
Coordinate quality for GPS Descript
Page 1929 and 1930:
Position CQ versus height CQ All GP
Page 1931 and 1932:
Standard deviation of distance meas
Page 1933 and 1934:
Cross section template A Cross sect
Page 1935 and 1936:
J.4 G Geoid model Description GPS o
Page 1937 and 1938:
GPS surveying techniques • Class
Page 1939 and 1940:
GPS surveying technique Real-time,
Page 1941 and 1942:
J.6 I Initialisation For cm positio
Page 1943 and 1944:
J.7 N Ntrip Networked Transport of
Page 1945 and 1946:
Ntrip Source The Ntrip Source gener
Page 1947 and 1948:
J.9 P Parabola Parabolic vertical c
Page 1949 and 1950:
Source Originated from application/
Page 1951 and 1952:
Source Originated from application/
Page 1953 and 1954:
J.11 T Tangent Refer to straight. T
Page 1955 and 1956:
Transformation Characteristic Descr
Page 1957 and 1958:
Page 1959 and 1960:
Page 1961 and 1962:
Page 1963 and 1964:
J.13 W WGS 1984 WGS 1984 is the glo
Page 1965 and 1966:
Menu ..............................
Page 1967 and 1968:
Azimuth, compute Determine coordina
Page 1969 and 1970:
Thematical With codelist ..........
Page 1971 and 1972:
Duplicate .........................
Page 1973 and 1974:
Recall deleted default ............
Page 1975 and 1976:
Filter Activate/deactivate for code
Page 1977 and 1978:
Height filter .....................
Page 1979 and 1980:
K Keys, configure .................
Page 1981 and 1982:
Manual, validity ..................
Page 1983 and 1984:
Stakeout, height ..................
Page 1985 and 1986:
Transverse Mercator ...............
Page 1987 and 1988:
Report sheet, create name 811, 1033
Page 1989 and 1990:
Sketching on images ...............
Page 1991 and 1992:
Survey Cross Section Direction ....
Page 1993 and 1994:
Delete an element .................
show all

Leica Viva Series Technical Reference Manual - PRISM-Surveying ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?