Leica Viva Series Technical Reference Manual - PRISM-Surveying ...

More documents

Recommendations

Info

34.3.2 Standard Mode Requirements Operating mode: Standard in Calculator Configuration. Standard Calculator Key Description F1 - F6 The function keys are allocated seven times. Refer to Description of Softkeys. Using the up and down keys the various allocations can be accessed. OK Description of fields Field Option Description First field on the screen Display only The unit used for trigonometric functions in the calculator as configured in Calculator Configuration. Viva Series, Calculator 750
Field Option Description DEG Degrees RAD Radians GRAD Gon Σ Display only The result of the sum or difference of values in the last field on the screen using Σ+ and Σ-. Third to sixth Display only Previously entered value field on the OR screen Latest operation including result. # indicates that the value is cut after the third decimal. Last field on the Editable field The value for next operation or result from latest screen operation. Next step Fn Quit returns to Main Menu. Viva Series, Calculator 751
Page 1 and 2:
Version 4.0 English Leica Viva Seri
Page 3 and 4:
Validity of this manual • This ma
Page 5 and 6:
Table of Contents In this manual Ch
Page 7 and 8:
7.4.2 Creating/Editing a Code 147 7
Page 9 and 10:
12.1.4 Editing an Existing RTK Prof
Page 11 and 12:
18.13 Total Station 408 18.14 GSI O
Page 13 and 14:
23 Instrument - TPS camera settings
Page 15 and 16:
29.7.1 Overview 641 29.7.2 Configur
Page 17 and 18:
34.3 Using the Calculator 748 34.3.
Page 19 and 20:
39.9.2 Manually Entered 917 39.9.3
Page 21 and 22:
43.7 Measuring Points to a Referenc
Page 23 and 24:
45.4.3 Inserting/Editing an Element
Page 25 and 26:
46.4.13 Re-initialise search 1446 4
Page 27 and 28:
50.3 Configuring Setup 1594 50.4 Se
Page 29 and 30:
57.2 Hidden Point Methods 1735 57.2
Page 31 and 32:
Appendix B Internal Memory 1850 App
Page 33 and 34:
1 Configurable Keys 1.1 Hot Keys
Page 35 and 36:
1.2 Favourites Key Description �
Page 37 and 38:
2 TPS Settings 2.1 Leica TPS Favour
Page 39 and 40:
Description of options Icon Descrip
Page 41 and 42:
2.2 Check Point Description This sc
Page 43 and 44:
Field Option Description Height dif
Page 45 and 46:
Description of fields Field Option
Page 47 and 48:
Turn Instrument to Hz/V, Relative p
Page 49 and 50:
2.5 Orientation With Compass Descri
Page 51 and 52:
2.6 Using the Digital Camera Taking
Page 53 and 54:
Leica GPS Favourites The appearance
Page 55 and 56:
Icon Description Camera To begin th
Page 57 and 58:
Description of the main menu functi
Page 59 and 60:
Key Description OK To start the hig
Page 61 and 62:
Next step Key Description OK To sel
Page 63 and 64:
Next step Key Description OK To sel
Page 65 and 66:
4.5 User Description User is availa
Page 67 and 68:
5 Jobs & Data - Jobs 5.1 Overview D
Page 69 and 70:
Page 71 and 72:
Key Description �The default valu
Page 73 and 74:
Field Option Description Average Co
Page 75 and 76:
Key Description Page To change to a
Page 77 and 78:
Additional calculation method for t
Page 79 and 80:
Job Properties:, Codelist page Key
Page 81 and 82:
Job Properties:, CAD files page Key
Page 83 and 84:
CAD Layers Next step IF you want to
Page 85 and 86:
5.4 Choosing a Job Access • For a
Page 87 and 88:
5.5 Managing Job Codes Description
Page 89 and 90:
Edit Code Next step IF THEN the job
Page 91 and 92:
6 Jobs & Data - Data 6.1 Overview D
Page 93 and 94:
Key Description More To display inf
Page 95 and 96:
Page 97 and 98:
6.3 Point Management 6.3.1 Creating
Page 99 and 100:
New Point, Code page Next step Page
Page 101 and 102:
� Field Option Description Attrib
Page 103 and 104:
Key Description Store To store the
Page 105 and 106:
Edit Point:, RTK info page Availabl
Page 107 and 108:
Edit Point:, Code page Field Option
Page 109 and 110:
6.3.3 Mean Page Description In orde
Page 111 and 112:
Access step-by-step The Mean page c
Page 113 and 114:
Key Description More To change betw
Page 115 and 116:
6.4 Line/Area Management 6.4.1 Over
Page 117 and 118:
Page 119 and 120:
Key Description Last To recall the
Page 121 and 122:
Creating lines/areas most efficient
Page 123 and 124:
Page 125 and 126:
Edit Line, Code page Key Descriptio
Page 127 and 128:
Key Description OK To close the scr
Page 129 and 130:
Sorts & Filters, Points page The av
Page 131 and 132:
Field Option Description Box around
Page 133 and 134:
Field Option Description Distance t
Page 135 and 136:
Page 137 and 138:
Key Description OK To close the scr
Page 139 and 140:
Page 141 and 142:
7.2 Accessing Codelist Management A
Page 143 and 144:
7.3 Creating/Editing a Codelist Acc
Page 145 and 146:
7.4 Managing Codes 7.4.1 Accessing
Page 147 and 148:
7.4.2 Creating/Editing a Code �
Page 149 and 150:
Field Option Description Linework S
Page 151 and 152:
Key Description New.. To create a n
Page 153 and 154:
� Default coordinate systems Acti
Page 155 and 156:
Key Description New.. To create a c
Page 157 and 158:
New Coordinate System or Edit Coord
Page 159 and 160:
8.4 Transformations 8.4.1 Accessing
Page 161 and 162:
8.4.2 Creating/Editing a Transforma
Page 163 and 164:
8.5 Ellipsoids 8.5.1 Accessing Elli
Page 165 and 166:
8.6 Projections 8.6.1 Accessing Pro
Page 167 and 168:
Column Option Description Oblique M
Page 169 and 170:
Field Option Description Type Selec
Page 171 and 172:
8.7.2 Accessing Geoid Model Managem
Page 173 and 174:
8.7.3 Creating a New Geoid Model fr
Page 175 and 176:
9 Jobs & Data - Import data 9.1 Ove
Page 177 and 178:
Format Characteristic Specialities
Page 179 and 180:
Key Description Fn Quit To exit the
Page 181 and 182:
Configuration Key Description OK To
Page 183 and 184:
Configuration (GSI) Description of
Page 185 and 186:
Key Description OK To import the da
Page 187 and 188:
Configuration This screen is availa
Page 189 and 190:
IF THEN a single line is to be sele
Page 191 and 192:
Select Layers to Import, for DXF Ro
Page 193 and 194:
9.4 Importing Data in DXF Format Re
Page 195 and 196:
Field Option Description Height to
Page 197 and 198:
Description of fields Next step Con
Page 199 and 200:
Format Characteristic Specialities:
Page 201 and 202:
10.2 Exporting Data from a Job to a
Page 203 and 204:
Configuration Key Description OK To
Page 205 and 206:
Key Description Filter.. To define
Page 207 and 208:
Page 209 and 210:
� Configuration, DXF page Field O
Page 211 and 212:
Description of columns Column Descr
Page 213 and 214:
Next step OK returns to Configurati
Page 215 and 216:
Page 217 and 218:
� Configuration, LandXML page Fie
Page 219 and 220:
� Do not remove the data storage
Page 221 and 222:
Configuration for FBK, General page
Page 223 and 224:
Next step OK returns to Export FBK/
Page 225 and 226:
Copy Data Between Jobs Key Descript
Page 227 and 228:
11 Instrument - TPS settings 11.1 M
Page 229 and 230:
Page 231 and 232:
11.1.2 Targets Description Each pri
Page 233 and 234:
11.1.3 Creating/Editing a Target Ac
Page 235 and 236:
11.2 Prism search settings Descript
Page 237 and 238:
Prism Search Settings, PowerSearch
Page 239 and 240:
Prism Search Settings, Fine search
Page 241 and 242:
Key Description Fn PE To change Pre
Page 243 and 244:
Field Option Description Coefficien
Page 245 and 246:
Page 247 and 248:
TS_003 d5 d3 P3 P0 d1 P0 Station P1
Page 249 and 250:
� Offsets & Quality Control, Targ
Page 251 and 252:
11.6 Lights / Lights & accessories
Page 253 and 254:
Lights & Accessories, Lights page T
Page 255 and 256:
Lights & Accessories, V limit page
Page 257 and 258:
12 Instrument - GPS settings 12.1 R
Page 259 and 260:
12.1.2 Creating a New RTK Profile R
Page 261 and 262:
12.1.4 Editing an Existing RTK Prof
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Description of fields for the Exter
Page 271 and 272:
Key Description Fn Default To recal
Page 273 and 274:
Page 275 and 276:
12.4 Quality control Description Th
Page 277 and 278:
Field Option Description Automatica
Page 279 and 280:
Quality Control, Advanced page Desc
Page 281 and 282:
Field Option Description Baseline l
Page 283 and 284:
Real-Time Stop Criteria The paramet
Page 285 and 286:
12.5 Raw data logging Description L
Page 287 and 288:
Field Option Description Controller
Page 289 and 290:
13 Antenna Heights 13.1 Overview De
Page 291 and 292:
13.2 Mechanical Reference Planes, M
Page 293 and 294:
13.3 Determining Antenna Heights 13
Page 295 and 296:
Carrier and adapter dimensions GS_0
Page 297 and 298:
Next step • At the beginning of a
Page 299 and 300:
Vertical height reading The vertica
Page 301 and 302:
Vertical height reading The vertica
Page 303 and 304:
SmartStation setup GS_078 a b c a)
Page 305 and 306:
Next step IF connecting a THEN GS10
Page 307 and 308:
GS Connection Wizard - Step 3 This
Page 309 and 310:
15 Connections.. - TPS connection w
Page 311 and 312:
15.2 Connection Using Cable Descrip
Page 313 and 314:
15.3 Connection Using Bluetooth Des
Page 315 and 316:
Page 317 and 318:
15.5 Connection To Leica Legacy and
Page 319 and 320:
Instrument Settings Third party tot
Page 321 and 322:
16 Connections.. - CS connection wi
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Next step Make a selection, press N
Page 331 and 332:
Key Description OK To return to the
Page 333 and 334:
Internet Connection, Internet page
Page 335 and 336:
Field Option Description Device Dis
Page 337 and 338:
18.3 GPS Rover / Base Sensor Descri
Page 339 and 340:
Field Option Description Last used
Page 341 and 342:
Key Description OK To accept change
Page 343 and 344:
Field Option Description Prefix '@@
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Field Option Description Set 2DCQ t
Page 351 and 352:
Field Option Description None No he
Page 353 and 354:
Diagram d1 GS_052 P0 a d2 d5 b P0 K
Page 355 and 356:
18.6 Export Job Description The Exp
Page 357 and 358:
Page 359 and 360:
Key Description Search Available wh
Page 361 and 362:
Field Option Description Leica 4G T
Page 363 and 364:
Field Option Description • 1016:
Page 365 and 366:
Field Option Description RTCM 20,21
Page 367 and 368:
RTK Rover Settings, RTK base page N
Page 369 and 370:
Page 371 and 372:
RTK Rover Settings, Advanced page F
Page 373 and 374:
Field Option Description EGNOS (tes
Page 375 and 376:
Height Smoothing with high dynamic
Page 377 and 378:
18.7.2 Configuration with Digital C
Page 379 and 380:
Page 381 and 382:
18.8 Base RTK 1 / Base RTK 2 18.8.1
Page 383 and 384:
Page 385 and 386:
Field Option Description Messages t
Page 387 and 388:
18.9 NMEA 1 / NMEA 2 � � Unavai
Page 389 and 390:
Page 391 and 392:
NMEA Messages This screen shows the
Page 393 and 394:
Page 395 and 396:
Field Option Description Monitor CQ
Page 397 and 398:
18.10 Remote (OWI) � Unavailable
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
18.12 Event Input 1/Event Input 2
Page 405 and 406:
Field Option Description Informatio
Page 407 and 408:
Event input 1/ Event input 2, Notif
Page 409 and 410:
Key Description Cntrl.. Available f
Page 411 and 412:
18.14 GSI Output Description Each t
Page 413 and 414:
Field Option Description Use RS232
Page 415 and 416:
Example 1: GSI8 Each word has 16 ch
Page 417 and 418:
Output format - Pt,N,E,Ht,Date Pos.
Page 419 and 420:
Field Description N Fixed text (N)
Page 421 and 422:
18.15 Field Controller Connection D
Page 423 and 424:
Viva Series, Connections.. - All ot
Page 425 and 426:
Page 427 and 428:
19.1.2 Configuring a GSM Connection
Page 429 and 430:
GSM Dial-Up Connection, Sim codes p
Page 431 and 432:
19.1.3 Configuring a CDMA Connectio
Page 433 and 434:
Next step Fn Info changes to CDMA I
Page 435 and 436:
19.2 Modems Description For modems,
Page 437 and 438:
Page 439 and 440:
� If channel changing is to be us
Page 441 and 442:
Field Option Description Modulation
Page 443 and 444:
Page 445 and 446:
Key Description Fn Save To save the
Page 447 and 448:
19.6 Internet Description Internet
Page 449 and 450:
Mountpoint, General page Field Opti
Page 451 and 452:
Mountpoint, Miscell page Descriptio
Page 453 and 454:
Dial-up Connection List Key Descrip
Page 455 and 456:
Page 457 and 458:
Key Description OK To select the hi
Page 459 and 460:
New Server, NTRIP page Field Option
Page 461 and 462:
20.1.2 Digital Cellular Phones Desc
Page 463 and 464:
20.1.3 Modems Typical uses • To t
Page 465 and 466:
� Base and rover can both be equi
Page 467 and 468:
20.1.6 RS232 Standard RS232 Standar
Page 469 and 470:
Supported hidden point measurement
Page 471 and 472:
Supported GPRS / Internet devices S
Page 473 and 474:
Devices This screen may consist of
Page 475 and 476:
20.3 Creating/Editing a Device Desc
Page 477 and 478:
Next step IF the device is a THEN r
Page 479 and 480:
21 Instrument - Instrument status i
Page 481 and 482:
STATUS function Description Refer t
Page 483 and 484:
Description of fields Field Descrip
Page 485 and 486:
Key Description More To display inf
Page 487 and 488:
Satellite Tracking: GPS, Almanac pa
Page 489 and 490:
21.4 RTK data link status Descripti
Page 491 and 492:
RTK Data Link Status, Device page N
Page 493 and 494:
For radios Description of fields Th
Page 495 and 496:
Page 497 and 498:
Key Description OK To return to RTK
Page 499 and 500:
21.5 Current GPS position Descripti
Page 501 and 502:
Current GPS Position, Baseline page
Page 503 and 504:
Raw Data Logging Status, Point occu
Page 505 and 506:
Raw Data Logging Status, RTK base p
Page 507 and 508:
Page 509 and 510:
21.7.3 ASCII Input Description This
Page 511 and 512:
21.7.4 RTK Data Link Status Descrip
Page 513 and 514:
Description of fields Column Descri
Page 515 and 516:
Diagram 0 GS12_129 c c c a a a a b
Page 517 and 518:
21.9 TPS current station info Acces
Page 519 and 520:
22 Instrument - Base settings 22.1
Page 521 and 522:
Satellite Tracking Settings, Advanc
Page 523 and 524:
Field Option Description User defin
Page 525 and 526:
22.2 Base raw data logging � Unav
Page 527 and 528:
Field Option Description • For st
Page 529 and 530:
24 User - Work settings 24.1 ID tem
Page 531 and 532:
ID Template Library Next step ENTER
Page 533 and 534:
Default ID template Description Lin
Page 535 and 536:
Examples for incrementation Descrip
Page 537 and 538:
ID Increment by Next point ID Notes
Page 539 and 540:
Page 541 and 542:
Field Option Description Attribute
Page 543 and 544:
24.3 My Survey Screen Description D
Page 545 and 546:
Configure Page Key Description OK T
Page 547 and 548:
Field Option Description Backsight
Page 549 and 550:
Field Option Description Offset Inp
Page 551 and 552:
Field Option Description Temp dry E
Page 553 and 554:
Hot Keys & Favourites, GPS Fn+hot k
Page 555 and 556:
24.5 Prompt before storing Access S
Page 557 and 558:
Coding methods Coding method Charac
Page 559 and 560:
Coding method Characteristic Descri
Page 561 and 562:
Codes marked with * have attributes
Page 563 and 564:
Key Description OK To return to the
Page 565 and 566:
25.2.2 Thematical Coding without Co
Page 567 and 568:
Select Free Code All free codes fro
Page 569 and 570:
25.3.2 Free Coding with Direct Inpu
Page 571 and 572:
For point codes: • The point code
Page 573 and 574:
25.5.2 Configuring SmartCodes Acces
Page 575 and 576:
Field Option Description Direction
Page 577 and 578:
Field Option Description Use a stri
Page 579 and 580:
Page 581 and 582:
Copying a code block to a new job s
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Exporting code information To expor
Page 589 and 590:
� The linework flag can be used w
Page 591 and 592:
26.3 Performing Linework with Thema
Page 593 and 594:
� • The rover menu must be used
Page 595 and 596:
Step Field Description for thematic
Page 597 and 598:
27.2 Accessing the Working Style Wi
Page 599 and 600:
27.3 Choosing a Different Working S
Page 601 and 602:
27.5 Editing a Working Style Workin
Page 603 and 604:
28 User - System settings 28.1 Regi
Page 605 and 606:
Field Option Description +123456.78
Page 607 and 608:
Regional Settings, Angle page Descr
Page 609 and 610:
Field Option Description GPS direct
Page 611 and 612:
Regional Settings, Coords page Desc
Page 613 and 614:
Regional Settings, Others page Colu
Page 615 and 616:
28.2 SmartWorx options Description
Page 617 and 618:
28.3 Screen & audio Description The
Page 619 and 620:
Screen & Audio Settings, Text input
Page 621 and 622:
Admin Settings Wizard, What do you
Page 623 and 624:
29 User - Tools & other utilities 2
Page 625 and 626:
Field Option Description Format fil
Page 627 and 628:
Page 629 and 630:
29.3 Load licence keys Description
Page 631 and 632:
Field Option Description Upload key
Page 633 and 634:
� Supported file File extension D
Page 635 and 636:
Ftp: Transfer, Field page Field Opt
Page 637 and 638:
Ftp: Transfer, Office page The file
Page 639 and 640:
Page 641 and 642:
29.7 Leica Exchange 29.7.1 Overview
Page 643 and 644:
Leica Exchange Main Menu Field Opti
Page 645 and 646:
29.7.2 Configuring Leica Exchange A
Page 647 and 648:
Field Option Description Display fo
Page 649 and 650:
Select People to Send Data Descript
Page 651 and 652:
29.7.4 Getting Data Access Select M
Page 653 and 654:
29.7.5 Data Transfer Status Access
Page 655 and 656:
29.7.6 In the Office In the office
Page 657 and 658:
Precise measurements To get precise
Page 659 and 660:
30.2 Details on Instrument Errors D
Page 661 and 662:
Vertical index error (i) Compensato
Page 663 and 664:
� Summary of errors to be adjuste
Page 665 and 666:
30.4 Combined Adjustment (l, t, i,
Page 667 and 668:
Aim the telescope accurately at a t
Page 669 and 670:
Check & Adjust Wizard, It is recomm
Page 671 and 672:
Check & Adjust Wizard, Step 1 Key D
Page 673 and 674:
Check & Adjust Wizard, Step 2 Check
Page 675 and 676:
30.6 Compensator Adjustment (l, t)
Page 677 and 678:
Check & Adjust Wizard, Step 2 Check
Page 679 and 680:
30.7 Viewing the Current Values Acc
Page 681 and 682:
30.9 Adjusting the Circular Level o
Page 683 and 684:
30.10 Adjusting the Circular Level
Page 685 and 686:
Step Description 3. Switch on the l
Page 687 and 688:
31 User - About Leica Viva Access S
Page 689 and 690:
32 Camera & Imaging 32.1 Overview D
Page 691 and 692:
Camera & imaging workflow on the TS
Page 693 and 694:
Page 695 and 696:
Field Option Description Link image
Page 697 and 698:
Requirements • A TS11 I or TS15 I
Page 699 and 700: Overview of keys, softkeys and touc
Page 701 and 702: 32.3.3 Within Applications Access I
Page 703 and 704: In Setup In the setup application,
Page 705 and 706: Camera View Settings, General page
Page 707 and 708: Camera View Settings, Lines / areas
Page 709 and 710: 32.3.4 Screenshot Description A scr
Page 711 and 712: Select Panoramic Image Type Panoram
Page 713 and 714: 32.4 Image Management � Access Da
Page 715 and 716: Sorts & Filters, Images page Key De
Page 717 and 718: Field Option Description Wide-angle
Page 719 and 720: Overview of keys, softkeys and touc
Page 721 and 722: 32.5.2 Field Sketching Description
Page 723 and 724: Sketch Pad Refer to "Overview of ke
Page 725 and 726: 33 TPS Functions 33.1 EDM Descripti
Page 727 and 728: Automatic aiming measurement Automa
Page 729 and 730: 33.2.2 PowerSearch Description The
Page 731 and 732: 33.3 Follow Moving Prisms - Lock De
Page 733 and 734: 33.4 RCS Description The instrument
Page 735 and 736: Using the EGL step-bystep Step Desc
Page 737 and 738: 33.7 Connection to Other Total Stat
Page 739 and 740: 33.7.2 Topcon Supported functions F
Page 741 and 742: 33.7.3 Sokkia Supported functions F
Page 743 and 744: 33.7.4 Nikon Supported functions Fu
Page 745 and 746: 34 Calculator 34.1 Accessing the Ca
Page 747 and 748: Description of fields Field Option
Page 749: Description of fields Field Option
Page 753 and 754: Description of softkeys First level
Page 755 and 756: Key Description PI To insert X: 3.1
Page 757 and 758: Fn to access the second level of fu
Page 759 and 760: Configure the Internet interface St
Page 761 and 762: Step Description 1. On the GPRS det
Page 763 and 764: 35.2 Using the NTRIP Service with a
Page 765 and 766: Step Description 1. The Server to u
Page 767 and 768: Step Description 1. If the selected
Page 769 and 770: 36.2 Accessing MapView Description
Page 771 and 772: Map View Settings, Points page Fiel
Page 773 and 774: Field Option Description Display ar
Page 775 and 776: Map View Settings, CAD import page
Page 777 and 778: Toolbar Point with focus Line/area
Page 779 and 780: 36.4.2 Keys, Softkeys and Toolbar D
Page 781 and 782: Touch icon Key or Softkey Descripti
Page 783 and 784: 36.5 Selecting Points, Lines and Ar
Page 785 and 786: 36.6 Context Menu Access The contex
Page 787 and 788: Option Available in Description Cle
Page 789 and 790: Application Display Description COG
Page 791 and 792: 37 Tap Map Description Tap Map is a
Page 793 and 794: Tap on a point Option Description T
Page 795 and 796: Option Description Import For CAD p
Page 797 and 798: Overview of touch icons in the draw
Page 799 and 800: 38 Applications - General Descripti
Page 801 and 802:
39 COGO 39.1 Overview Description C
Page 803 and 804:
39.2 Accessing COGO Access Select M
Page 805 and 806:
COGO calculation methods Descriptio
Page 807 and 808:
Page 809 and 810:
Configuration, TPS specific page Fi
Page 811 and 812:
Configuration, Report sheet page De
Page 813 and 814:
39.4 COGO Calculation - Inverse Met
Page 815 and 816:
Inverse methods Description Current
Page 817 and 818:
39.4.2 Point to Point and Current P
Page 819 and 820:
Page 821 and 822:
Inverse Point to Line/Inverse Curre
Page 823 and 824:
Inverse Result, Result page Field O
Page 825 and 826:
39.4.4 Point to Arc and Current Pos
Page 827 and 828:
Key Description Survy.. To manually
Page 829 and 830:
Inverse Result, Result page Next st
Page 831 and 832:
39.5 COGO Calculation - Traverse Me
Page 833 and 834:
COGO traverse calculation without o
Page 835 and 836:
Page 837 and 838:
Page 839 and 840:
39.6 COGO Calculation - Intersectio
Page 841 and 842:
Intersection methods Description Do
Page 843 and 844:
Intersection methods Description By
Page 845 and 846:
39.6.2 Intersection with Double Bea
Page 847 and 848:
Key Description Fn Modif.. To add,
Page 849 and 850:
Page 851 and 852:
Intersection Double Distance, Input
Page 853 and 854:
Intersection Result, Result 1/Resul
Page 855 and 856:
39.6.4 Intersection with Bearing -
Page 857 and 858:
Key Description Fn Modif.. To add,
Page 859 and 860:
Page 861 and 862:
Intersection By Points, Input page
Page 863 and 864:
Intersection Result, Result page Ke
Page 865 and 866:
39.6.6 Intersection with TPS Observ
Page 867 and 868:
Page 869 and 870:
Description of the Line/Arc methods
Page 871 and 872:
Line/Arc Methods Description Calcul
Page 873 and 874:
Line/Arc Methods Description Calcul
Page 875 and 876:
39.7.2 Arc Calculation Diagram for
Page 877 and 878:
Field Option Description 2 tngnts &
Page 879 and 880:
Calculations Input, Input page Desc
Page 881 and 882:
Next step On the Code page, type in
Page 883 and 884:
Create Line, Input page Key Descrip
Page 885 and 886:
Calculations Input, Input page Desc
Page 887 and 888:
Page 889 and 890:
39.7.4 Segment an Arc Exceptions to
Page 891 and 892:
Field Option Description No. of seg
Page 893 and 894:
Key Description OK To select a meth
Page 895 and 896:
Diagram The diagrams show the area
Page 897 and 898:
GS_013 P3 P2 d P0 P0 Point A of def
Page 899 and 900:
SYS13_007 P0 a P0 First new COGO po
Page 901 and 902:
Field Option Description Survey new
Page 903 and 904:
Page 905 and 906:
39.8.4 Results of the Area Division
Page 907 and 908:
Key Description Coord To view other
Page 909 and 910:
Description of the Shift, Rotate &
Page 911 and 912:
Point Selection Listed are points w
Page 913 and 914:
Select points by range Key Descript
Page 915 and 916:
Diagram SYS13_004 SYS13_005 a a P0
Page 917 and 918:
39.9.2 Manually Entered Computed Pa
Page 919 and 920:
Computed Parameters, Rotate page Fi
Page 921 and 922:
Field Option Description New distan
Page 923 and 924:
Field Option Description Store Poin
Page 925 and 926:
39.9.3 Matching Points Point Select
Page 927 and 928:
Match Points This screen provides a
Page 929 and 930:
Next step IF THEN the transformatio
Page 931 and 932:
Field Option Description Fix Parame
Page 933 and 934:
39.10 COGO Calculation - Angle Meth
Page 935 and 936:
39.11 COGO Calculation - Horizontal
Page 937 and 938:
Horizontal Curve Calculator, Result
Page 939 and 940:
39.12 COGO Calculation - Triangle M
Page 941 and 942:
COGO Triangle, Results page Key Des
Page 943 and 944:
Key Description View To view all ca
Page 945 and 946:
Page 947 and 948:
Example: Calculations for a distanc
Page 949 and 950:
Requirements for control points •
Page 951 and 952:
Field Option Description 3 These pr
Page 953 and 954:
Choose WGS84 & Local Jobs Key Descr
Page 955 and 956:
40.3 The Normal Method 40.3.1 Confi
Page 957 and 958:
40.3.2 Determining a New Coordinate
Page 959 and 960:
Choose System Components This scree
Page 961 and 962:
Matched Points (n) This screen prov
Page 963 and 964:
Column Description • For Onestep
Page 965 and 966:
Check Residuals Displays a list of
Page 967 and 968:
Store Coordinate System, Summary pa
Page 969 and 970:
Determine Coord System Description
Page 971 and 972:
IF the selected method is THEN Modi
Page 973 and 974:
40.3.4 Matching Points: Selecting/
Page 975 and 976:
40.3.5 Transformation Results for O
Page 977 and 978:
Transformation Results, Height page
Page 979 and 980:
Page 981 and 982:
40.4 The One Point Localisation Met
Page 983 and 984:
Choose System Components This scree
Page 985 and 986:
Key Description OK To confirm the s
Page 987 and 988:
Key Description Inv Available for M
Page 989 and 990:
Diagram for Onestep, Method: Conver
Page 991 and 992:
Page 993 and 994:
Field Option Description Grid SF Di
Page 995 and 996:
For Onestep Description of fields F
Page 997 and 998:
Page 999 and 1000:
Page 1001 and 1002:
Page 1003 and 1004:
Field Option Description Next step
Page 1005 and 1006:
Define Local Quickgrid Point Field
Page 1007 and 1008:
Field Option Description Ignore loc
Page 1009 and 1010:
Page 1011 and 1012:
Field Option Description Largest re
Page 1013 and 1014:
Field Option Description None No di
Page 1015 and 1016:
Point types Reference lines/arcs ca
Page 1017 and 1018:
TS_021 P0 P1 d1 d2 A reference arc
Page 1019 and 1020:
� It is possible to define an arc
Page 1021 and 1022:
42.2 Accessing Reference Line Acces
Page 1023 and 1024:
Choose Control Job Key Description
Page 1025 and 1026:
42.3 Configuring Reference Line Acc
Page 1027 and 1028:
Configuration, Key points page Fiel
Page 1029 and 1030:
Configuration, Quality control page
Page 1031 and 1032:
Configuration, Graphics page This p
Page 1033 and 1034:
Configuration, Report sheet page Fi
Page 1035 and 1036:
42.4 Choosing Reference Lines/Arcs
Page 1037 and 1038:
Page 1039 and 1040:
Field Option Description Second Poi
Page 1041 and 1042:
Manage Reference Lines/Manage Refer
Page 1043 and 1044:
42.4.4 Defining Reference Line/Arc
Page 1045 and 1046:
Slope Information to Show Next step
Page 1047 and 1048:
42.4.5 Defining Reference Line/Arc
Page 1049 and 1050:
Reference arc shifts d1 GS_019 TS_0
Page 1051 and 1052:
Field Option Description Shift line
Page 1053 and 1054:
Measure to line - vertical measurem
Page 1055 and 1056:
TS_028 Target point outside arc P0
Page 1057 and 1058:
Measure Points, Ref Line/Ref Arc pa
Page 1059 and 1060:
Key Description Fn Conect and Fn Di
Page 1061 and 1062:
For task Measure to line Descriptio
Page 1063 and 1064:
For task Measure to line, Height to
Page 1065 and 1066:
Stake to line - vertical measuremen
Page 1067 and 1068:
Stake to arc - vertical measurement
Page 1069 and 1070:
Page 1071 and 1072:
42.7 Gridstaking to a Reference Lin
Page 1073 and 1074:
d1 d3 P1 TS_035 Stake grid from arc
Page 1075 and 1076:
Define Grid to be Staked d1 P1 TS_0
Page 1077 and 1078:
Field Option Description Store poin
Page 1079 and 1080:
Page 1081 and 1082:
42.8 Staking to Alignment 42.8.1 Ov
Page 1083 and 1084:
42.8.2 Accessing Staking an Alignme
Page 1085 and 1086:
Alignment Report, Points page Lines
Page 1087 and 1088:
Page 1089 and 1090:
42.8.4 Staking Operation Descriptio
Page 1091 and 1092:
Page 1093 and 1094:
Field Option Description Go back Di
Page 1095 and 1096:
Page 1097 and 1098:
Defining a reference plane • TPS
Page 1099 and 1100:
Tilted plane Any number of points d
Page 1101 and 1102:
Horizontal plane The axes of the ho
Page 1103 and 1104:
Vertical plane The axes of the vert
Page 1105 and 1106:
43.2 Accessing Reference Plane & Gr
Page 1107 and 1108:
43.3 Creating a Reference Plane Fro
Page 1109 and 1110:
New Reference Plane, Points page
Page 1111 and 1112:
Ref Plane Coordinate System This sc
Page 1113 and 1114:
Offset of Reference Plane Key Descr
Page 1115 and 1116:
43.4 Selecting a Reference Plane fr
Page 1117 and 1118:
Key Description Fn About To display
Page 1119 and 1120:
Page 1121 and 1122:
Edit Reference Plane, Points page
Page 1123 and 1124:
Edit Reference Plane, Offset page N
Page 1125 and 1126:
43.7 Measuring Points to a Referenc
Page 1127 and 1128:
Next step Page changes to the Map p
Page 1129 and 1130:
Diagram TS_120 Known P0 Station Unk
Page 1131 and 1132:
Grid Scan Settings, Define start po
Page 1133 and 1134:
Grid Scan Status, Progress page Key
Page 1135 and 1136:
43.9 Grid Scan on Surface Descripti
Page 1137 and 1138:
Surface Scan Settings, Define grid
Page 1139 and 1140:
44 Roads - General 44.1 Overview
Page 1141 and 1142:
Name of subapplication Description
Page 1143 and 1144:
44.2 Jobs & Design Data 44.2.1 Acce
Page 1145 and 1146:
Field Option Description Rail job S
Page 1147 and 1148:
44.2.2 Working with a DTM Job Acces
Page 1149 and 1150:
44.2.3 Design Data Design data for
Page 1151 and 1152:
�� Lines are referenced by laye
Page 1153 and 1154:
Layers Tunnels generally consist of
Page 1155 and 1156:
Key Description Edit.. To edit the
Page 1157 and 1158:
Key Description Store To store data
Page 1159 and 1160:
Field Option Description Set start
Page 1161 and 1162:
Page 1163 and 1164:
Segment Info - Start Point/Segment
Page 1165 and 1166:
Segment Info - Start Point/Segment
Page 1167 and 1168:
Page 1169 and 1170:
Configuration, Design page Next ste
Page 1171 and 1172:
Field Option Description Yes (with
Page 1173 and 1174:
Field Option Description Project sc
Page 1175 and 1176:
Configuration, Rail design page Ava
Page 1177 and 1178:
Field Option Description CL height
Page 1179 and 1180:
Field Option Description Disable ch
Page 1181 and 1182:
Field Option Description Drilling r
Page 1183 and 1184:
Page 1185 and 1186:
Field Option Description Maximum he
Page 1187 and 1188:
Page 1189 and 1190:
Configuration, TPS page Description
Page 1191 and 1192:
Field Option Description �Dependi
Page 1193 and 1194:
Field Option Description Prompt bef
Page 1195 and 1196:
Page 1197 and 1198:
Field Description �If no defined
Page 1199 and 1200:
Field Description CL grade Grade of
Page 1201 and 1202:
Field Description Additnl line offs
Page 1203 and 1204:
Field Description Road_089 CL grade
Page 1205 and 1206:
44.3.4 Road Surface Grade - Info Pa
Page 1207 and 1208:
Field Description Camber The supere
Page 1209 and 1210:
Field Description Vertical sqr offs
Page 1211 and 1212:
44.3.5 Road Manual Slope, Local Man
Page 1213 and 1214:
Field Description Hinge ht diff Hei
Page 1215 and 1216:
Field Description Nearest hz tngnt
Page 1217 and 1218:
44.3.6 Road Crown - Info Page Avail
Page 1219 and 1220:
Field Description �If no defined
Page 1221 and 1222:
Field Description Defined northing
Page 1223 and 1224:
Field Description ∆ chainage Diff
Page 1225 and 1226:
Field Description Road_089 CL grade
Page 1227 and 1228:
44.3.8 Road DTM - Info Page � Ava
Page 1229 and 1230:
44.3.9 Rail - Info Page Available f
Page 1231 and 1232:
Field Description Current design ca
Page 1233 and 1234:
44.3.10 Tunnel - Info Page Availabl
Page 1235 and 1236:
Field Description Actual northing N
Page 1237 and 1238:
Step Description � Depending on t
Page 1239 and 1240:
Shift Settings, Horizontal shift/Ve
Page 1241 and 1242:
Field Option Description a) Chainag
Page 1243 and 1244:
Sign convention for shifts � The
Page 1245 and 1246:
Horizontal shift For surface grades
Page 1247 and 1248:
44.5 Tasks Description When staking
Page 1249 and 1250:
44.6 Understanding Terms and Expres
Page 1251 and 1252:
44.6.2 Road - Horizontal and Vertic
Page 1253 and 1254:
Lines The stake out of a line is us
Page 1255 and 1256:
A layer is a combination of lines t
Page 1257 and 1258:
Sign convention for stake offset an
Page 1259 and 1260:
Multiple chainage or station 8 9 10
Page 1261 and 1262:
44.6.6 Road - Working Corridor Desc
Page 1263 and 1264:
44.6.7 Road - Extension of the Cent
Page 1265 and 1266:
44.6.9 Rail - Working with a Single
Page 1267 and 1268:
Diagram - Section Two generic metho
Page 1269 and 1270:
Diagram - Section e Rail_005 c a) C
Page 1271 and 1272:
Left/right rail stakeout Descriptio
Page 1273 and 1274:
44.6.13 Tunnel - Basic Terms Terms
Page 1275 and 1276:
Superelevation Tunnel_003 a c b d a
Page 1277 and 1278:
Distance along profile By the dista
Page 1279 and 1280:
e scanned at a given forward and ba
Page 1281 and 1282:
44.6.15 Tunnel - Shifts Description
Page 1283 and 1284:
Design profile shift A shift can be
Page 1285 and 1286:
By adding a second point B to the p
Page 1287 and 1288:
45.2.2 Creating a New Alignment Acc
Page 1289 and 1290:
45.2.3 Modifying an Existing Alignm
Page 1291 and 1292:
45.2.4 Importing Alignment Data Acc
Page 1293 and 1294:
Next step OK imports the selected a
Page 1295 and 1296:
Alignment Editor Menu Description o
Page 1297 and 1298:
45.3 Configuring Alignment Editor A
Page 1299 and 1300:
Configuration, Advanced page Descri
Page 1301 and 1302:
45.4 Edit Horizontal Alignments Usi
Page 1303 and 1304:
45.4.2 Editing the Start Point Acce
Page 1305 and 1306:
Page 1307 and 1308:
Field Option Description For Elemen
Page 1309 and 1310:
Key Description Fn Config.. To acce
Page 1311 and 1312:
Field Option Description Radius Edi
Page 1313 and 1314:
Field Option Description End radius
Page 1315 and 1316:
Field Option Description Spiral out
Page 1317 and 1318:
Key Description Delete To delete th
Page 1319 and 1320:
Key Description Inv.. To calculate
Page 1321 and 1322:
For Element type at PI: Spiral Fiel
Page 1323 and 1324:
For Element type at PI: Spiral-Spir
Page 1325 and 1326:
45.6.2 Editing the Start Point Acce
Page 1327 and 1328:
Page 1329 and 1330:
Vertical Straight/Vertical Parabola
Page 1331 and 1332:
Field Option Description End chaina
Page 1333 and 1334:
For Element type: Curve Field Optio
Page 1335 and 1336:
45.7 Edit Vertical Alignments Using
Page 1337 and 1338:
Key Description Last.. To recall pr
Page 1339 and 1340:
45.8 Edit Cross Section Templates 4
Page 1341 and 1342:
45.8.2 Creating/Editing a Cross Sec
Page 1343 and 1344:
45.8.3 Add/Edit a Layer Access In N
Page 1345 and 1346:
Add Segment, Input page Key Descrip
Page 1347 and 1348:
Field Option Description Vertical d
Page 1349 and 1350:
Key Description Delete To delete a
Page 1351 and 1352:
Page 1353 and 1354:
45.10.2 Creating/Editing a Chainage
Page 1355 and 1356:
Field Option Description Horiz & ve
Page 1357 and 1358:
LEICA Geo Office can be found on th
Page 1359 and 1360:
Page 1361 and 1362:
Define Task screen Key Description
Page 1363 and 1364:
Field Option Description Line to us
Page 1365 and 1366:
For Method to use: Surface grade Fi
Page 1367 and 1368:
Field Option Description Use cut an
Page 1369 and 1370:
Field Option Description For Method
Page 1371 and 1372:
For Method to use: DTM, available f
Page 1373 and 1374:
Lines The screen can have a Lines p
Page 1375 and 1376:
Key Description For lines from Roa
Page 1377 and 1378:
Description of fields Common to all
Page 1379 and 1380:
Slope staking using Reference point
Page 1381 and 1382:
Step Description 1. The first step
Page 1383 and 1384:
The defined rail over ground should
Page 1385 and 1386:
Workflow Step Description � The f
Page 1387 and 1388:
Step Description � The first step
Page 1389 and 1390:
46.3 Staking/Checking the Road 46.3
Page 1391 and 1392:
Page 1393 and 1394:
Field Option Description Stake heig
Page 1395 and 1396:
Understanding priorities of various
Page 1397 and 1398:
Stake/Check screen, Info page Field
Page 1399 and 1400:
The following information is shown:
Page 1401 and 1402:
Description • When staking points
Page 1403 and 1404:
Description • Lines define variou
Page 1405 and 1406:
Description This process is differe
Page 1407 and 1408:
Screen Points measured within an in
Page 1409 and 1410:
Description • Surfaces such as th
Page 1411 and 1412:
Description • Surfaces, such as t
Page 1413 and 1414:
Required elements A 3D design of th
Page 1415 and 1416:
46.3.10 Measuring Digital Terrain M
Page 1417 and 1418:
46.4.2 Use heights from DTM Availab
Page 1419 and 1420:
Field Option Description DTM layer
Page 1421 and 1422:
46.4.4 Get current angle to alignme
Page 1423 and 1424:
46.4.5 Stake individual point Avail
Page 1425 and 1426:
Key Description Calc To perform the
Page 1427 and 1428:
Configuration Description of fields
Page 1429 and 1430:
Key Description Fn Config.. To conf
Page 1431 and 1432:
Box / base definition Key Descripti
Page 1433 and 1434:
Step Description 1. Define the base
Page 1435 and 1436:
46.4.9 Get current slope Availabili
Page 1437 and 1438:
Field Option Description Relative t
Page 1439 and 1440:
46.4.10 Manual Slope Availability T
Page 1441 and 1442:
46.4.12 Shift reference line Availa
Page 1443 and 1444:
Reference Shift Key Description OK
Page 1445 and 1446:
The expanded element and the shifte
Page 1447 and 1448:
After initialisation This screen sh
Page 1449 and 1450:
Calculation of the stake intersecti
Page 1451 and 1452:
Step Description 4. Height confirma
Page 1453 and 1454:
Step Description �To stake furthe
Page 1455 and 1456:
Road_065 LEICA Geo Office LEICA Geo
Page 1457 and 1458:
47.1.3 Importing the Track Design w
Page 1459 and 1460:
Step Description 5. Selecting the j
Page 1461 and 1462:
Step Description • For a single t
Page 1463 and 1464:
Step Description The Rail Editor pr
Page 1465 and 1466:
Step Description Superelevation For
Page 1467 and 1468:
Step Description 9. Checking the tr
Page 1469 and 1470:
Step Description 11. Checking the s
Page 1471 and 1472:
� Refer to the Design to Field Us
Page 1473 and 1474:
47.2 Defining the Work Access 1) Se
Page 1475 and 1476:
Field Option Description Left rail
Page 1477 and 1478:
Checking points Besides checking po
Page 1479 and 1480:
Page 1481 and 1482:
Field Option Description • Positi
Page 1483 and 1484:
Field Option Description Cant right
Page 1485 and 1486:
Field Option Description Offsets Ma
Page 1487 and 1488:
Field Option Description When this
Page 1489 and 1490:
Stake Line, Stake page This page is
Page 1491 and 1492:
Stake Track/ Check Track, Info page
Page 1493 and 1494:
47.3.2 Offset Library Description T
Page 1495 and 1496:
47.3.3 Working with Pendular Displa
Page 1497 and 1498:
47.4.2 Use heights from DTM Availab
Page 1499 and 1500:
Field Option Description Show DTM o
Page 1501 and 1502:
47.4.4 Stake individual point Avail
Page 1503 and 1504:
Procedure Measuring the first point
Page 1505 and 1506:
48 Roads - Tunnel 48.1 Creating a N
Page 1507 and 1508:
48.1.3 Design Profiles Tunnel desig
Page 1509 and 1510:
Vertical or perpendicular profiles
Page 1511 and 1512:
48.2 Defining the Work Access 1) Se
Page 1513 and 1514:
Key Description OK To continue to t
Page 1515 and 1516:
Field Option Description Apply dril
Page 1517 and 1518:
For Method to use: Scan profile Fie
Page 1519 and 1520:
48.3 Staking/Checking the Tunnel 48
Page 1521 and 1522:
Scan profile, Scan area page Field
Page 1523 and 1524:
Page 1525 and 1526:
Stake face/Stake profile/Check prof
Page 1527 and 1528:
Field Option Description Dist from
Page 1529 and 1530:
Field Option Description Stake offs
Page 1531 and 1532:
Field Option Description For Tunnel
Page 1533 and 1534:
Stake face/Stake profile/Check prof
Page 1535 and 1536:
Given that it is likely that a degr
Page 1537 and 1538:
Second iteration This process is re
Page 1539 and 1540:
Drilling rig orientation step-by-st
Page 1541 and 1542:
48.3.3 Stake profile and Check prof
Page 1543 and 1544:
48.3.4 Scan profile Overview A tunn
Page 1545 and 1546:
Key Description OK To continue to S
Page 1547 and 1548:
Key Description OK To store the def
Page 1549 and 1550:
48.4 The Tools Menu 48.4.1 Profile
Page 1551 and 1552:
View at - Layer Name, Map page Key
Page 1553 and 1554:
Diagram TS_048 P0 P1 P2 P3 P4 Known
Page 1555 and 1556:
49.2 Sets of Angles 49.2.1 Accessin
Page 1557 and 1558:
Options Description Create a new gr
Page 1559 and 1560:
Page 1561 and 1562:
Configuration, Advanced page Next s
Page 1563 and 1564:
Field Option Description Format fil
Page 1565 and 1566:
New Point Group, General page Key D
Page 1567 and 1568:
New Point Group, Points page Key De
Page 1569 and 1570:
Page 1571 and 1572:
Page 1573 and 1574:
Page 1575 and 1576:
Description of fields Next step Mea
Page 1577 and 1578:
Page 1579 and 1580:
Column Description Use For Yes: The
Page 1581 and 1582:
Column Description Use For Yes: The
Page 1583 and 1584:
Column Description σ Hz angle Stan
Page 1585 and 1586:
Field Option Description Store Poin
Page 1587 and 1588:
Step Description • Define time wh
Page 1589 and 1590:
A screen displays a notice that mon
Page 1591 and 1592:
Setup types • Each setup method r
Page 1593 and 1594:
50.2 Accessing Setup Access Select
Page 1595 and 1596:
Page 1597 and 1598:
Configuration, Advanced page For Se
Page 1599 and 1600:
Page 1601 and 1602:
Page 1603 and 1604:
50.5 Enter Station Information Acce
Page 1605 and 1606:
Page 1607 and 1608:
Set Station Orientation, Orientatio
Page 1609 and 1610:
Field Option Description Computed d
Page 1611 and 1612:
Set Station Orientation, Station pa
Page 1613 and 1614:
50.7.2 Multiple backsights Requirem
Page 1615 and 1616:
Key Description GPS Applicable when
Page 1617 and 1618:
previous points or finish the setup
Page 1619 and 1620:
50.7.4 Resection Requirements The c
Page 1621 and 1622:
Define Station Ht & Axis Key Descri
Page 1623 and 1624:
50.8 Setup Results Description The
Page 1625 and 1626:
Field Option Description Δheight D
Page 1627 and 1628:
Key Description Set To set the orie
Page 1629 and 1630:
Station Results, Targets page This
Page 1631 and 1632:
Column Description Δ hz dist Can b
Page 1633 and 1634:
51 Stakeout 51.1 Overview Descripti
Page 1635 and 1636:
Point types It is possible to stake
Page 1637 and 1638:
51.2 Accessing Stakeout Access Sele
Page 1639 and 1640:
51.3 Configuring Stakeout Access Se
Page 1641 and 1642:
Field Option Description Only updat
Page 1643 and 1644:
Configuration, Heights page Descrip
Page 1645 and 1646:
Field Option Description To line (c
Page 1647 and 1648:
Page 1649 and 1650:
� This diagram shows an example N
Page 1651 and 1652:
Page 1653 and 1654:
Element Description Defined line Fr
Page 1655 and 1656:
Field Option Description Design hei
Page 1657 and 1658:
Key Description Store To accept the
Page 1659 and 1660:
51.6 Staking Out a DTM or Points &
Page 1661 and 1662:
� The stake out procedure is iden
Page 1663 and 1664:
Page 1665 and 1666:
52.2 Start base over last setup Des
Page 1667 and 1668:
53 Survey - General 53.1 Surveying
Page 1669 and 1670:
Key Description Fn Config.. To conf
Page 1671 and 1672:
Key Description Meas To start loggi
Page 1673 and 1674:
Field Option Description • For an
Page 1675 and 1676:
Next step Step Description 1. Meas
Page 1677 and 1678:
Page 1679 and 1680:
53.4.2 Initialise while Moving Init
Page 1681 and 1682:
53.4.4 Initialise on Known Point In
Page 1683 and 1684:
54 Survey - General Description The
Page 1685 and 1686:
Key Description Fn 2Store To aim ma
Page 1687 and 1688:
55 Survey - Auto Points 55.1 Overvi
Page 1689 and 1690:
55.2 Configuring Auto Points Access
Page 1691 and 1692:
Field Option Description Stop & go
Page 1693 and 1694:
Field Option Description Don't stor
Page 1695 and 1696:
Field Option Description 1st line D
Page 1697 and 1698:
Field Option Description Hz angle D
Page 1699 and 1700:
Field Option Description Quality 3D
Page 1701 and 1702:
55.3 Measuring Auto Points Requirem
Page 1703 and 1704:
Page 1705 and 1706:
Next step IF THEN auto points are t
Page 1707 and 1708:
Two auto points The configured offs
Page 1709 and 1710:
P3 TS_045 d1 P1 d2 P6 1 P4 P2 P7 P1
Page 1711 and 1712:
Page 1713 and 1714:
Page 1715 and 1716:
56 Survey Cross Section 56.1 Overvi
Page 1717 and 1718:
Coding of cross section elements Pr
Page 1719 and 1720:
Key Description OK To select the hi
Page 1721 and 1722:
Key Description Delete To delete th
Page 1723 and 1724:
Page 1725 and 1726:
Key Description Store Dist To store
Page 1727 and 1728:
Field Option Description x The numb
Page 1729 and 1730:
56.5 Configuring Survey Cross Secti
Page 1731 and 1732:
Field Option Description Attribute
Page 1733 and 1734:
� Hidden point measurement method
Page 1735 and 1736:
57.2 Hidden Point Methods 57.2.1 Be
Page 1737 and 1738:
57.2.3 Using 2 Distances Descriptio
Page 1739 and 1740:
57.2.5 Backwards Bearing & Distance
Page 1741 and 1742:
Key Description Sun Available when
Page 1743 and 1744:
Field Option Description Horiz dist
Page 1745 and 1746:
Page 1747 and 1748:
57.5 Computing an Azimuth 57.5.1 Us
Page 1749 and 1750:
57.5.2 Using Auxiliary Point Descri
Page 1751 and 1752:
Page 1753 and 1754:
Slope distance Key Description OK T
Page 1755 and 1756:
57.7 Hidden Point Measurement Inclu
Page 1757 and 1758:
Field Option Description Target hei
Page 1759 and 1760:
Properties of hidden points The pro
Page 1761 and 1762:
Key Description Meas To measure and
Page 1763 and 1764:
Hidden Point Result, Result page Ke
Page 1765 and 1766:
58.3 Configuring Hidden Point Acces
Page 1767 and 1768:
Next step OK returns to the screen
Page 1769 and 1770:
Properties of remote points Averagi
Page 1771 and 1772:
Key Description Fn IndivID and Fn R
Page 1773 and 1774:
59.3 Configuring Remote Point Acces
Page 1775 and 1776:
60 Traverse 60.1 Overview Descripti
Page 1777 and 1778:
60.2 Accessing Traverse Access Sele
Page 1779 and 1780:
60.3 Creating/Editing a Traverse Ac
Page 1781 and 1782:
60.4 Selecting an Existing Traverse
Page 1783 and 1784:
60.5 Traverse Data Description This
Page 1785 and 1786:
60.6 Configuring Traverse Access Se
Page 1787 and 1788:
Page 1789 and 1790:
60.7 Traverse Methods 60.7.1 Starti
Page 1791 and 1792:
60.7.2 Continuing an Existing Trave
Page 1793 and 1794:
60.7.3 Closing Traverse Close trave
Page 1795 and 1796:
Close traverse on internal referenc
Page 1797 and 1798:
60.7.4 Creating a Control Point fro
Page 1799 and 1800:
60.8 Traverse Point Results Descrip
Page 1801 and 1802:
Page 1803 and 1804:
IF accessed THEN • For a closed t
Page 1805 and 1806:
Page 1807 and 1808:
60.10 Traverse Adjustment 60.10.1 A
Page 1809 and 1810:
Field Option Description Transit ru
Page 1811 and 1812:
Page 1813 and 1814:
Adjustment Store Description of fie
Page 1815 and 1816:
Properties of measured points The p
Page 1817 and 1818:
Next step IF THEN a Volume Calculat
Page 1819 and 1820:
Next step Page changes to the first
Page 1821 and 1822:
Key Description Meas Stop Dist To s
Page 1823 and 1824:
Field Option Description Antenna he
Page 1825 and 1826:
61.4.3 Create a New Surface from Pr
Page 1827 and 1828:
Surface status, Points page Field O
Page 1829 and 1830:
61.4.4 Choosing an Existing Surface
Page 1831 and 1832:
61.4.6 Boundary Definition Edit Bou
Page 1833 and 1834:
Edit Boundary, Points page Key Desc
Page 1835 and 1836:
Boundary Tools Menu Description of
Page 1837 and 1838:
Field Option Description No. of tri
Page 1839 and 1840:
Page 1841 and 1842:
Appendix A Menu Tree Menu tree for
Page 1843 and 1844:
| |—— Roads.. | | | | | |——
Page 1845 and 1846:
| | | | | |—— Measure mode & ta
Page 1847 and 1848:
| |—— Work settings | | | |—
Page 1849 and 1850:
| |—— Satellite tracking | |—
Page 1851 and 1852:
Appendix C Directory Structure of t
Page 1853 and 1854:
|—— DOWNLOAD | • Various file
Page 1855 and 1856:
Sockets Pin Signal Name Function Di
Page 1857 and 1858:
Pin assignments for port P1 PIN_001
Page 1859 and 1860:
D.3 GS15 Description Some applicati
Page 1861 and 1862:
Sockets Pin Signal Name Function Di
Page 1863 and 1864:
Pin assignments for port P1 PIN_001
Page 1865 and 1866:
Pin assignments for port P4/E2 PIN_
Page 1867 and 1868:
Pin assignments for 8pin LEMO-1 PIN
Page 1869 and 1870:
D.7 TPS1200+ Description Some appli
Page 1871 and 1872:
Y cables Radio programming cables N
Page 1873 and 1874:
Serial data transfer cables Name De
Page 1875 and 1876:
USB data transfer cables Name Descr
Page 1877 and 1878:
E.2 TPS Cables Power cables Radio /
Page 1879 and 1880:
USB data transfer cables Name Descr
Page 1881 and 1882:
F.2 Symbols Used for Describing the
Page 1883 and 1884:
Symbol Field Description Example
Page 1885 and 1886:
F.3 GGA - Global Positioning System
Page 1887 and 1888:
F.4 GGK - Real-Time Position with D
Page 1889 and 1890:
F.5 GGK(PT) - Real-Time Position wi
Page 1891 and 1892:
F.6 GGQ - Real-Time Position with C
Page 1893 and 1894:
F.7 GLL - Geographic Position Latit
Page 1895 and 1896:
F.8 GNS - GNSS Fix Data Syntax $--G
Page 1897 and 1898:
F.9 GSA - GNSS DOP and Active Satel
Page 1899 and 1900:
F.10 GSV - GNSS Satellites in View
Page 1901 and 1902:
F.11 LLK - Leica Local Position and
Page 1903 and 1904:
F.12 LLQ - Leica Local Position and
Page 1905 and 1906:
F.13 RMC - Recommended Minimum Spec
Page 1907 and 1908:
F.14 VTG - Course Over Ground and G
Page 1909 and 1910:
F.15 ZDA - Time and Date Syntax $--
Page 1911 and 1912:
AT command Description AT+CBST= [ [
Page 1913 and 1914:
AT command Description AT+CPIN= [,]
Page 1915 and 1916:
Appendix I Event Input Notify Messa
Page 1917 and 1918:
Appendix J Glossary J.1 A A (parame
Page 1919 and 1920:
Attribute value regions The attribu
Page 1921 and 1922:
Class Characteristic Description In
Page 1923 and 1924:
Code group A code group allows code
Page 1925 and 1926:
Coordinate triplet A measured point
Page 1927 and 1928:
Coordinate quality for GPS Descript
Page 1929 and 1930:
Position CQ versus height CQ All GP
Page 1931 and 1932:
Standard deviation of distance meas
Page 1933 and 1934:
Cross section template A Cross sect
Page 1935 and 1936:
J.4 G Geoid model Description GPS o
Page 1937 and 1938:
GPS surveying techniques • Class
Page 1939 and 1940:
GPS surveying technique Real-time,
Page 1941 and 1942:
J.6 I Initialisation For cm positio
Page 1943 and 1944:
J.7 N Ntrip Networked Transport of
Page 1945 and 1946:
Ntrip Source The Ntrip Source gener
Page 1947 and 1948:
J.9 P Parabola Parabolic vertical c
Page 1949 and 1950:
Source Originated from application/
Page 1951 and 1952:
Source Originated from application/
Page 1953 and 1954:
J.11 T Tangent Refer to straight. T
Page 1955 and 1956:
Transformation Characteristic Descr
Page 1957 and 1958:
Page 1959 and 1960:
Page 1961 and 1962:
Page 1963 and 1964:
J.13 W WGS 1984 WGS 1984 is the glo
Page 1965 and 1966:
Menu ..............................
Page 1967 and 1968:
Azimuth, compute Determine coordina
Page 1969 and 1970:
Thematical With codelist ..........
Page 1971 and 1972:
Duplicate .........................
Page 1973 and 1974:
Recall deleted default ............
Page 1975 and 1976:
Filter Activate/deactivate for code
Page 1977 and 1978:
Height filter .....................
Page 1979 and 1980:
K Keys, configure .................
Page 1981 and 1982:
Manual, validity ..................
Page 1983 and 1984:
Stakeout, height ..................
Page 1985 and 1986:
Transverse Mercator ...............
Page 1987 and 1988:
Report sheet, create name 811, 1033
Page 1989 and 1990:
Sketching on images ...............
Page 1991 and 1992:
Survey Cross Section Direction ....
Page 1993 and 1994:
Delete an element .................
show all

Leica Viva Series Technical Reference Manual - PRISM-Surveying ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?