Tellabs 8609 Smart Router
Tellabs 8609 Smart Router
Tellabs 8609 Smart Router
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DATA SHEET<br />
<strong>Tellabs</strong> ® <strong>8609</strong> <strong>Smart</strong> <strong>Router</strong><br />
Modular access router with remarkable switching and interface capacity for LTE - coupled<br />
with extensive multiservice support<br />
<strong>Tellabs</strong> ® <strong>Smart</strong> <strong>Router</strong>s<br />
<strong>Tellabs</strong> ® <strong>Smart</strong> <strong>Router</strong>s offer versatile and scalable solutions for<br />
mobile backhaul from small aggregation sites to controller and<br />
gateway sites. In addition, <strong>Tellabs</strong> routers serve fixed and mobile<br />
convergence and cloud computing networking needs. The solutions<br />
are designed to meet the ever-growing requirements of data hungry<br />
mobile and enterprise users. All the <strong>Tellabs</strong> <strong>Smart</strong> <strong>Router</strong> platforms<br />
are LTE-ready and provide an extensive Ethernet and IP/MPLS<br />
feature set. Simultaneous support for multiservice applications<br />
in access and aggregation networks protects earlier network<br />
investments. The <strong>Smart</strong> <strong>Router</strong>s product family is supported by<br />
the <strong>Tellabs</strong> ® 8000 Intelligent Network Manager, which is an easy to<br />
use end-to-end network management solution. The <strong>Tellabs</strong> 8000<br />
intelligent manager minimizes operational and maintenance costs<br />
and scales up to tens of thousands of network elements.<br />
<strong>Tellabs</strong> ® <strong>8609</strong> <strong>Smart</strong> <strong>Router</strong> Main Application<br />
The <strong>Tellabs</strong> ® <strong>8609</strong> <strong>Smart</strong> <strong>Router</strong> provides a cost-efficient and<br />
seamless way of converting a mobile access network from an E1/<br />
T1 TDM network to an Ethernet-based packet network without the<br />
need to update any of the radio access network equipment. Versatile<br />
service capabilities, including Ethernet, TDM, ATM and HDLC<br />
connectivity, IP VPN, MPLS switching, IP routing as well as VLAN<br />
switching enable the migration of 3G ATM and 2G TDM, Ethernet or<br />
IP-based networks into a single network infrastructure. The <strong>Tellabs</strong><br />
<strong>8609</strong> router is ideal for access network cell sites that handle large<br />
amounts of mobile traffic. The <strong>Tellabs</strong> <strong>8609</strong> router is only 1RU in<br />
height, which enables installations at sites where rack space is<br />
limited.<br />
Features and Benefits<br />
The <strong>Tellabs</strong> <strong>8609</strong> router has a packet-based forwarding architecture<br />
with QoS awareness, enabling network optimization for voice, data<br />
services in LTE, 4G, 3G and 2G networks. The advanced quality<br />
of service features enable the differentiation of real-time voice and<br />
video services from premium and best effort data services. The<br />
unique Packet Loop Test feature, which is part of the <strong>Tellabs</strong> <strong>Smart</strong><br />
<strong>Router</strong> product portfolio and <strong>Tellabs</strong> 8000 intelligent manager, helps<br />
to analyze delay, jitter, throughput and connectivity parameters.<br />
Remarkable Throughput<br />
See tellabs.com for more information about <strong>Tellabs</strong> Solutions<br />
The <strong>Tellabs</strong> <strong>8609</strong> router has a packet-based forwarding architecture with QoS<br />
awareness.<br />
Remarkable Throughput<br />
Environmentally hardened, <strong>Tellabs</strong> <strong>8609</strong> router offers 12 fixed<br />
Gigabit Ethernet ports and two slots for interface modules providing<br />
throughput up to 7.5 Gbps. This makes the <strong>Tellabs</strong> <strong>8609</strong> router<br />
optimal for cell and aggregation sites.<br />
Robust Synchronization<br />
The <strong>Tellabs</strong> <strong>8609</strong> router supports a high quality OCXO, which<br />
provides improved temperature stability for IEEE 1588v2 and<br />
adaptive timing recovery. It also provides a highly stable node<br />
clock holdover. In addition to adaptive timing and IEEE 1588v2<br />
clock recovery mechanisms, node timing can be obtained from a<br />
BITS or GPS source, any PDH, SONET/SDH interface or any of the<br />
synchronous Ethernet interfaces. The <strong>Tellabs</strong> <strong>8609</strong> router supports<br />
the transition from TDM to packet synchronization in a controlled<br />
way by verifying the packet synchronization performance with<br />
professional tools.<br />
As there is no longer a need for separate E1/T1s at every cell site,<br />
the <strong>Tellabs</strong> <strong>Smart</strong> <strong>Router</strong> solution provides a cost-optimized solution,<br />
which is independent from the legacy network.
2 TELLABS <strong>8609</strong> ACCESS SWITCH<br />
Specifications<br />
Physical Dimensions<br />
n 441 x 44 x 300 mm / 17.36 x 1.73 x 11.81 in (W x H x D)<br />
n Installation into standard 19-inch rack. The 23-inch and ETSI 600<br />
mm racks supported with side adapters<br />
n 1RU high<br />
Power and Cooling<br />
n User-changeable dual feed wide range (-48 VDC to +24 VDC)<br />
power module (one per element)<br />
n Hot swappable single feed -48 VDC power module (up to 2 per<br />
element)<br />
n Power consumption: typical 70W, maximum 100W<br />
n Hot swappable air filter and fan module<br />
Forwarding Plane<br />
n IPv4 routing<br />
n MPLS switching (LSR and LER)<br />
Functionality<br />
n IP VPN (RFC4364)<br />
n Ethernet/VLAN, SAToP, CESoPSN, ATM and HDLC pseudowires<br />
n Single and multi-segment pseudowires<br />
n TDM cross connection<br />
n ATM VP/VC switching<br />
n ATM cell concatenation<br />
n ATM IMA<br />
n MC / MLPPP, PPPmux<br />
n Y.1731 frame loss, frame delay and frame delay variation support<br />
n IEEE802.1ag Ethernet OAM loopback, continuity check, ping and<br />
link trace<br />
n BFD (Static routes, OSPF, ISIS, RSVP-TE)<br />
Forwarding capacity<br />
n Up to 7.5 Gbps, typical 4 Gbps (packet size dependent)<br />
Chassis Configuration<br />
n Two slots for hot swappable power feed modules<br />
n Two slots for user-changeable Line Modules (LM) - Not hot<br />
swappable<br />
n Twelve Fixed Gigabit Ethernet Ports: four 10BASE-T/100BASE-<br />
TX/1000BASE-T and eight 100/1000BASE-X SFP<br />
n Local management port (RS-232 type)<br />
n External alarm interface<br />
n Station Clock Input (SCI)<br />
n Station Clock Output (SCO)<br />
n Pulse-per-Second (PPS) clock input and output<br />
Line Modules (LM)<br />
n 8 x chE1/chT1 LM<br />
n 8 x 10/100BASE-TX LM<br />
Resiliency<br />
n Ethernet Link Aggregation 802.1AX<br />
n 1:1 RSVP-TE LSP protection<br />
n Fast Reroute (FRR)<br />
n IP load balancing (Equal Cost Multipath - ECMP)<br />
n TDM pseudowire redundancy<br />
Synchronization<br />
n ITU-T [G.813] option 1<br />
n ITU-T [G.8262]<br />
n Telcordia [GR-1244] Stratum 3<br />
n Synchronous Ethernet<br />
n SSM over Ethernet [G.8264]<br />
See tellabs.com for more information about <strong>Tellabs</strong> Solutions<br />
n Adaptive synchronization from SAToP and CESoPSN pseudowires<br />
n IEEE 1588v2 Precision Time Protocol<br />
n IEEE1588v2 Boundary Clock for phase sync<br />
IPv4 Routing and MPLS Label Distribution Protocols<br />
n OSPF-TE, ISIS-TE, BGP and MP-BGP<br />
n LDP, RSVP-TE<br />
Traffic Management<br />
n DiffServ support for up to 7 traffic classes, 7 queues per interface<br />
n DiffServ aware MPLS Traffic Engineering (DS-TE)<br />
n IEEE802.1P/Q mapping to IP or MPLS<br />
n Policing and shaping<br />
n VLAN shaping<br />
n Access Control Lists (ACL)<br />
n ATM service categories: CBR, rt-VBR, nrt-VBR, UBR+, UBR<br />
n ATM VC queuing/shaping
3 TELLABS <strong>8609</strong> ACCESS SWITCH<br />
Management<br />
n CLI with SSH2, FTP with SSH2<br />
n SNMPv1 and SNMPv2 monitoring<br />
n <strong>Tellabs</strong> ® 8000 Intelligent Network Manager<br />
n Cell site autoconfiguration based on DHCP client<br />
Standards<br />
n Safety: EN 60950-1:2006 and IEC60950-1:2005<br />
n EMC: EN 300 386:2008<br />
n RTTE Directive 1999/5/EC<br />
n FCC 47 CFR Part 15, Subpart B, Class A<br />
Environmental Conditions<br />
n Storage: ETSI EN 300 019-1-1, Class 1.1, Temperature: –5°C to<br />
45°C / 23°F to 113°F<br />
n Transportation: ETSI EN 300 019-1-2 Class 2.3, Temperature:<br />
–40°C to 70°C / – 40°F to 158°F<br />
n Operating conditions: ETSI EN 300 019-1-3 Class 3.2 (non-condensing).<br />
Temperature: -40°C to 65°C / -40°F to 149°F. Relative<br />
humidity: 5% to 95%<br />
n Minimum cold boot-up temperature: -20°C / -4°F<br />
North America<br />
<strong>Tellabs</strong><br />
1415 West Diehl Road<br />
Naperville, IL 60563<br />
U.S.A.<br />
+1 630 798 8800<br />
Fax: +1 630 798 2000<br />
Asia Pacific<br />
<strong>Tellabs</strong><br />
3 Anson Road<br />
#14–01 Springleaf Tower<br />
Singapore 079909<br />
Republic of Singapore<br />
+65 6215 6411<br />
Fax: +65 6215 6422<br />
Next Step:<br />
Visit http://www.tellabs.com/solutions/<br />
mobilebackhaul to access more data<br />
sheets, white papers and case studies on<br />
how <strong>Tellabs</strong> is helping operators advance<br />
their backhaul networks. If you have a<br />
question about <strong>Tellabs</strong> Mobile Backhaul<br />
solution, please email ask@tellabs.com.<br />
Europe, Middle East & Africa<br />
<strong>Tellabs</strong><br />
Abbey Place<br />
24–28 Easton Street<br />
High Wycombe, Bucks<br />
HP11 1NT<br />
United Kingdom<br />
+44 871 574 7000<br />
Fax: +44 871 574 7151<br />
Latin America & Caribbean<br />
<strong>Tellabs</strong><br />
Rua James Joule No. 92<br />
EDIFÍCIO PLAZA I<br />
São Paulo – SP<br />
04576-080<br />
Brasil<br />
+55 11 3572 6200<br />
Fax: +55 11 3572 6225<br />
The following trademarks and service marks are owned by <strong>Tellabs</strong> Operations, Inc., or its affiliates in the United States and/or in other countries: TELLABS ® , TELLABS and T symbol ® , T symbol ® , and SMARTCORE ® . Statements herein may contain<br />
projections or other forward-looking statements regarding future events, products, features, technology and resulting commercial or technological benefits and advantages. These statements are for discussion purposes only, are subject to change and are<br />
not to be construed as instructions, product specifications, guarantees or warranties. Actual results may differ materially. The information contained herein is not a commitment, promise or legal obligation to deliver any material, code, feature or functionality.<br />
It is intended to outline <strong>Tellabs</strong>’ general product direction. The development, release and timing of any material, code, feature or functionality described herein remains at <strong>Tellabs</strong>’ sole discretion.<br />
© 2013 <strong>Tellabs</strong>. All rights reserved. 74.2290E Rev. H 02/13