WinTEC3 Software user's Guide - Electromotive Engine Controls

DeskTop and Main Menu.
As you can see from the screen above the Desktop and Main Menu have several sections that you must be
aware of before you start the Tuning process. The Current version number is on the desktop and Main menu in the
upper left hand corner of each screen. The currently Open ‘BIN’ filename is also at the top of the Desktop. Just
below that you see the WinTEC3 Tool Bar. This Tool Bar gives you instant access to the major sections of the
program and also provides access to sections like Interrogate BIN File, Dataports, Problem Reporting and Tip of
the Day information. At the bottom of the Desktop screen you will find the System Status bars, which lets the Tuner
know what Hot Keys are available and the current Dataport being used. At the very bottom of the screen is the
Task Bar which gives the user the access to other programs and helps to track the screens used by WinTEC3. If
the “Show TaskBar” and “Hide TaskBar” buttons are visible, you are using a Laptop with 800x600 screen
resolution. These buttons can turn the Task Bar On and Off according to your needs.
On the Main Menu you will find a selection of Program Buttons that can be activated by clicking the Icon or
Program Bar with the Mouse pointer or by moving too each button by pressing the TAB key. When a program
button is highlighted you can press the Enter key on the keyboard and that part of the program will be activated.
Using the Keyboard and pressing the ALT key and the underlined Character key at the same time will also activate
these program buttons.
5