GENERAL CATALOGUE - Mapei

GENERAL 

CATALOGUE 

JANUARY 

2012 

ADHESIVES • SEALANTS • CHEMICAL PRODUCTS FOR BUILDING

GENERAL 

CATALOGUE 

JANUARY 

2012

2 

INDEX BY SECTOR 

12 1. SCREEDS AND SMOOTHING COMPOUNDS 

14 1.1 Screeds 

15 1.2 Sand and cement screeds 

16 1.3 Smoothing compounds 

18 1.4 Products for levelling substrates 

20 2. PRODUCTS FOR SOUNDPROOFING 

24 3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS 

34 4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL 

36 4.1 Hydraulic binder based adhesives 

41 4.2 Synthetic resin-based adhesives 

42 4.3 Reactive adhesives 

44 5. GROUTS FOR CERAMIC TILES 

46 5.1 Cementitious grouts 

47 5.2 Epoxy grouts 

49 5.3 Ready-to-use paste products 

50 6. SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE 

54 7. ELASTIC SEALANTS AND ADHESIVES 

56 7.1 Acetic silicone sealants 

57 7.2 Polyurethane sealants and adhesives 

59 7.3 Neutral silicone sealants 

59 7.4 Acrylic sealants and adhesives 

60 7.5 Other sealants 

61 7.6 Adhesives for PVC 

62 7.7 Accessories and primers for sealants 

64 8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET 

66 8.1 Adhesives for wooden and laminate floors 

69 8.2 Paints, stuccos, oils, base coats and coloured sealants for parquet 

74 9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS 

76 9.1 Adhesives in water dispersion 

82 9.2 Resin adhesives in alcohol 

83 9.3 Reactive adhesives 

84 9.4 Adhesives for synthetic grass 

85 9.5 Polychloroprenic contact adhesives 

85 9.6 Cementitious adhesives 

86 10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, 

RESILIENT AND TEXTILE COVERINGS 

88 10.1 Complementary products for laying ceramic tiles and stone material 

89 10.2 Complementary products for laying resilient and textile coverings 

90 10.3 Accessories, abrasive disks and products for the maintenance of parquet 

96 11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS 

98 11.1 Resin based products 

106 11.2 Cementitious based products 

107 11.3 Complementary products for resin and cementitious floors 

112 12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE

116 13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS 

118 13.1 Consolidating masonry and render by injecting slurry 

118 13.2 Consolidating various types of weak and crumbly substrates (porous stone, brickwork, 

tuff, installation mortar, render, etc.) 

119 13.3 Horizontal chemical barriers against capillary rising damp 

119 13.4 De-humidifying masonry with binders and mortars for render 

121 13.5 Lime based transpirant renders 

121 13.6 “Reinforced” renders, installation mortars and masonry 

121 13.7 Skimming of de-humidifying transpirant and structural mortars 

122 13.8 Brick, stone, tuff and mixed masonries 

124 14. RESTORATION OF WOODEN STRUCTURES 

128 15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS 

132 16. PRODUCTS FOR THE RESTORATION OF CONCRETE 

134 16.1 Protection of steel reinforcement rods 

135 16.2 Repairs to concrete with compensated-shrinkage mortar and binders 

142 17. SMOOTHING PRODUCTS FOR CONCRETE AND RENDER SURFACES 

144 17.1 Concrete 

146 17.2 Renders 

148 18. PRODUCTS FOR ANCHORING AND RAPID FIXING 

152 19. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED 

CONCRETE 

158 20. PRODUCTS FOR GALVANIC CATHODIC PROTECTION OF METALLIC STRUCTURES 

160 21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING 

162 21.1 Strengthening concrete and steel structures 

168 21.2 Strengthening masonry structures 

170 22. PRODUCTS FOR THERMAL INSULATION 

176 23. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS 

180 24. WALL PROTECTIVE AND DECORATIVE COATINGS 

194 25. WATERPROOFING SYSTEMS 

196 25.1 Waterproofing structures below ground level 

200 25.2 Waterproofing structures above ground level 

203 25.3 Sealing and waterproofing joints and fillets 

208 26. ADMIXTURES FOR CONCRETE 

210 26.1 Admixture for concrete 

213 26.2 Superficial form release agents and curing compounds 

216 27. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY 

218 27.1 Mortars for the building industry 

220 27.2 Damp aggregates for the building industry 

221 27.3 Dry aggregates for the building industry 

3

4 

ALPHABETICAL INDEX 

A Additix PE 107 

Adesilex F57 82 

Adesilex FIS13 172 

Adesilex G19 83 

Adesilex G19 Conductive 83 

Adesilex G20 83 

Adesilex LC/R 66 

Adesilex LC/R-P 66 

Adesilex LP 85 

Adesilex MT32 76 

Adesilex P4 18/36 

Adesilex P9 36 




Adesilex PG1 154/162 

Adesilex PG1 Rapid 154/162 



Adesilex T Super 61 

Adesilex TDV 76 

Adesilex UP71 83 

Adesilex V4 76 

Adesilex VS45 76 

Adesilex VZ 85 

Adesivil D3 66 

Antifreeze Liquid 210 

Antifreeze S 210 

Antipluviol 182 

Antipluviol S 182 

Antipluviol W 182 

Aquacol T 77 

Aquaflex 178 

Aquaflex Roof 200 

B BEtonFLuid* 218 

Biblock 26 

BIOstabilitura* 218 

C CALCESTRUZZO* 218 

Carboplate 162 

Carbotube 163 

Cleaner H 90 

Cleaner L 91 

Colorite Beton 182 

Colorite Matt 183 

Colorite Performance 183 

Consolidante 8020 118 

D Drain Front 200 

Drain Vertical/Drain Lateral 200 

Duresil EB 183 

Dursilite 183 

Dynamon SX 210 

Dynastone Color 106 

E Eco Prim Grip 26 

Eco Prim PU 1K 26 

Eco Prim PU 1K Turbo 26 

Eco Prim T 27 

Elastocolor Net 184 

Elastocolor Paint 184 

Elastocolor Primer 184 

Elastocolor Rasante 184 

Elastocolor Rasante SF 185 

Elastocolor Waterproof 185 

Elastorapid 36 

Epojet 155/163 

Epojet LV 155 

Eporip 27/155 

Eporip Turbo 27/155 

Epoxy Speed 107 

Expancrete 210 

F Fiberplan 16 

Fibres FF 137 

Fibres R38 115/139 

Fibres R60 114/138 

FIBROmalta* 218 

FIBROstabilitura* 219 

Fix & Grout Brick 41 

Flexcolor 49 

Form Release Agent DMA 1000 213 


* VAGA Products 

PAGE PAGE PAGE 


Fuga Fresca 88 

Fugolastic 46 

G Glicovil 77 

Glicovil Marker 77 

Glicovil Special 77 

Granirapid 37/85 

Grassello di CALCE* 219 

Gravel 0-8 14/135 

Gravel 0-15 135 

Gravel 3-5 135 

Gravel 6-10 135 

H HR15 219 

I Idrocrete DM 211 

Idrosilex 196 

Idrosilex Pronto 196 

Idrostop 204 

Idrostop B25 204 

Idrostop Mastic 204 

Idrostop PVC BE 204 

Idrostop PVC BI 205 

Injectors Ø 23 163 

Isolastic 37 

K Kerabond 37 

Kerabond T 38 

Keracolor FF 46 

Keracolor GG 46 

Keracolor PPN 52 

Keracolor SF 46 

Keracrete 38 

Keracrete Powder 38 

Keraflex 38 

Keraflex Easy 39 

Keraflex Maxi S1 39 

Kerafloor 39 

Keralastic 42 

Keralastic T 43 

Keranet 88 

Kerapoxy 47 

Kerapoxy Adhesive 43 

Kerapoxy Cleaner 88 

Kerapoxy CQ 47 

Kerapoxy Design 47 

Kerapoxy IEG 48 

Kerapoxy P 48 

Kerapoxy SP 48 

Keraquick 39 

Keraseal 88 

Keraset 40 

L Lampocem 150 

Lamposilex 196 

Latex Plus 40 

Lignobond 66 

Livigum 27 

M Malech 28/185 

MaltaBASTARDA* 219 

MaltaVISTA* 220 

Mape-Antique Allettamento 122 

Mape-Antique CC 119 

Mape-Antique F21 118 

Mape-Antique FC Civile 121 

Mape-Antique FC Grosso 122 

Mape-Antique FC Ultrafine 122 

Mape-Antique I 118 

Mape-Antique Intonaco NHL 121 

Mape-Antique LC 119 

Mape-Antique MC 119 

Mape-Antique Rinzaffo 120 

Mape-Antique Strutturale NHL 121/123 

Mape-Asphalt Repair 0/8 114 

Mapeband 205 

Mapeband PE 120 205 

Mapeband TPE 205 

Mapecem 14 

Mapecem Pronto 14 

Mapecoat DW 25 98/185 

Mapecoat I 24 98/186 

Mapecoat I 600 W 28/98 

Mapecoat I 600 W Lucido 28/98 

Mapecoat I 620 W 99 

Mapecoat W 186 

Mapecolor Paste 99 

Mapecontact 85 

Mapecrete Creme Protection 99 

Mapecrete LI Hardener 99 

Mapecrete Stain Protection 100 

Mapecryl Eco 78 

Mapecure CA 214 

Mapecure E 214 

Mapecure S 214 

Mapecure SRA 136/211 

Mapefer 134 

Mapefer 1K 134 

Mapefibre NS12/NS18 214 

Mapefibre ST24/ST42 15 

Mapefill 150 

Mapefill R 150 

Mapefinish 144 

Mapefix EP 150 

Mapefix PE SF 151 

Mapefix VE SF 151 

Mapeflex AC4 60 

Mapeflex AC-FR 60 

Mapeflex AC-P 60 

Mapeflex AC-PRO 60 

Mapeflex Blackfill 61 

Mapeflex Firestop 1200°C 61 

Mapeflex MS 45 59 

Mapeflex PB25 57 

Mapeflex PB27 57 

Mapeflex PU20 57 



Mapeflex PU40 58/206 

Mapeflex PU45 58/206 

Mapeflex PU50 SL 58/206 


Mapefloor Binder 930 100 

Mapefloor Cleaner ED 108 

Mapefloor CPU/HD 100 

Mapefloor CPU/MF 100 

Mapefloor Decor 700 101 

Mapefloor EP19 101 

Mapefloor Filler 108 

Mapefloor Finish 50 101 


Mapefloor Finish 52 W 102 

Mapefloor Finish 53 W/L 102 

Mapefloor Finish 54 W/S 102 



Mapefloor I 300 SL 103 

Mapefloor I 300 SL TRP 103 

Mapefloor I 320 SL CONCEPT 103 

Mapefloor I 350 SL 104 

Mapefloor I 500 W 104 

Mapefloor I 900 104 



Mapefloor Maintenance Kit 108 

Mapefloor PU 400 105 

Mapefloor PU 410 105 

Mapefloor Wax Remover 108 

Mapefluid N200 211 

Mapefluid PZ500 212 

Mapefluid PZ504 212 

Mapefluid R104 212 

Mapefoam 62/206 

Mapeform Eco 31 215 



Mapegel 50 196 

MapeGlitter 48 

Mapegrid B 250 163 

Mapegrid G120 164 

Mapegrid G220 164 

Mapegrout 430 136 

Mapegrout BM 136 

Mapegrout Fast-Set 136 

Mapegrout FMR 137 

Mapegrout Hi-Flow 137 

Mapegrout Hi-Flow GF 137 

Mapegrout Hi-Flow TI 20 114/138 

Mapegrout LM2K 138 

Mapegrout SV 114/138 

Mapegrout SV Fiber 115/139 

Mapegrout SV T 115/139 

Mapegrout T40 139

Mapegrout T60 140 

Mapegrout Thixotropic 140 

Mapegum PU 1K 201 

Mapegum WPS 201 

Mapelastic 201 

Mapelastic AquaDefense 201 

Mapelastic Foundation 197 

Mapelastic Smart 202 

Mapelay 89 

Mapelectric CP1 90 

Mapelux Lucida 109 

Mapelux Opaca 109 

Mapenet 150 202 

Mapeplast PT1 212 

Mapeprim SP 28 

Mapeproof 197 

Mapeproof CD 197 

Mapeproof LW 197 

Mapeproof Mastic 198 

Mapeproof Seal 198 

Mapeproof Swell 198 

Mapequarz 89 

Maperod C 164 

Maperod G 164 

Mapescreed 704 15 

Mapeshield E 25 134 

Mapeshield I 134 

Mapeshield S 158 

Mapesil 300°C 56 

Mapesil AC 56/207 

Mapesil BM 59 

Mapesil LM 59 

Mapesil Z 56 

Mapesil Z Plus 56 

Mapesilent Band 22 

Mapesilent Band R 22 

Mapesilent Door 22 

Mapesilent Panel 22 

Mapesilent Roll 23 

Mapesilent Tape 23 

Mapesonic CR 23 

Mapestone PFS 2 52 

Mapestone PFS PCC 2 52 

Mapestone TFB 60 52 

Mapestop 119 

Mapetard 213 

Mapetex Sel 202 

Mapetex System 89 

Mapetherm AR1 172 

Mapetherm AR1 GG 172 

Mapetherm Ba 172 

Mapetherm Cork 173 

Mapetherm EPS 173 

Mapetherm FIX 173 

Mapetherm FIX 9 173 

Mapetherm FIX B 174 

Mapetherm M. Wool 174 

Mapetherm Net 174 

Mapetherm Profil 174 

Mapetherm Tile Fix 15 89 

Mapetherm XPS 175 

Mapetop N AR6 106 

Mapewood Gel 120 126 

Mapewood Paste 140 126 

Mapewood Primer 100 126 

MapeWrap 11 165 




MapeWrap B UNI-AX 166 

MapeWrap C BI-AX 166 

MapeWrap C Fiocco 166 

MapeWrap C QUADRI-AX 166 

MapeWrap C UNI-AX 167 

MapeWrap G Fiocco 167 

MapeWrap G QUADRI-AX 167 

MapeWrap G UNI-AX 167 

MapeWrap Primer 1 168 

MapeWrap S Fabric 168 

MapeWrap S Fiocco 168 

MISTA* 220 

Monofinish 144 

Monolastic 202 

N Nivoplan 18/144 

Nivorapid 16 

P Pianocem M 16 

Pianodur R 16 

PAGE PAGE PAGE 

Planicrete 29/213 

Planigrout 300 151 

Planipatch 17 

Planitop 100 144 








Planitop Fast 330 18/145 

Planitop HDM 168 

Planitop HDM Maxi 169 

Planitop HDM Restauro 169 

Planitop Smooth & Repair 140 

Planopur 17 

Plastimul 198 

Plastimul 1K Super Plus 199 

Plastimul 2K Plus 199 

Plastimul 2K Super 199 

Plastimul Primer 199 

Porocol 130 

Porocol FF 130 

PoroMap Finitura 122 

PoroMap Intonaco 120 

PoroMap Intonaco Macchina 120 

PoroMap Rinzaffo 120 

PoroMap Rinzaffo Macchina 121 

Primer 3296 29/118 

Primer AS 62 

Primer BI 29 

Primer EP 29/62 

Primer EP Rustop 30/105 

Primer FD 62 

Primer for Aquaflex 178 

Primer G 30 

Primer G Conductive 30/90 

Primer KL 30 

Primer M 31/63 

Primer MF 31 

Primer MF EC Plus 31 

Primer P 31/63 

Primer PU60 32/63 

Primer S 32 

Primer SN 32/106 

Prosfas 32 

Pulicol 2000 90 

Purtop 400 M 203 

Purtop 600 203 

Purtop 1000 203 

Q Quartz 0.25 109 

Quartz 0.5 109 

Quartz 1.2 33/110 

Quartz 1.9 110 

Quarzolite Base Coat 186 

Quarzolite Graffiato 186 

Quarzolite Paint 187 

Quarzolite Tonachino 187 

Quarzolite Tonachino Plus 187 

R Resfoam 1 KM 200 

Rete 320 110 

Rollcoll 78 

S SabbiaCEMENTO* 220 

SAETTA* 220 

Silancolor AC Paint 187 

Silancolor AC Tonachino 188 

Silancolor Base Coat 188 

Silancolor Cleaner Plus 188 

Silancolor Graffiato 188 

Silancolor Paint 189 

Silancolor Paint Plus 189 

Silancolor Primer 189 

Silancolor Primer Plus 189 

Silancolor Tonachino 190 

Silancolor Tonachino Plus 190 

Silexcolor Base Coat 190 

Silexcolor Graffiato 190 

Silexcolor Marmorino 191 

Silexcolor Paint 191 

Silexcolor Primer 191 

Silexcolor Tonachino 191 

Silwood 69 

Silwood Decking 69 

Stabilcem 141 

T Thinner for adhesives 33 

Thinner PU 33 

TICINO* 221 

Tixobond White 40 

Topcem 14 

Topcem Pronto 15 

Topcem Pronto C60 15 

Triblock Finish 145 

Triblock P 33 

U Ultrabond Aqua-Contact 78 

Ultrabond Aqua-Contact Cork 78 

Ultrabond Eco 170 79 









Ultrabond Eco Fix 81 

Ultrabond Eco P992 1K 67 

Ultrabond Eco S945 1K 67 

Ultrabond Eco S955 1K 67 

Ultrabond Eco Tack 81 

Ultrabond Eco V4 Conductive 81 

Ultrabond Eco V4 SP 81 

Ultrabond Eco V4 SP Fiber 82 

Ultrabond Eco VS90 82 

Ultrabond P-R9 91 

Ultrabond P902 2K 68 




Ultrabond S965 1K 69 

Ultrabond S997 1K 69 

Ultrabond Super Grip 61/82 

Ultrabond Turf PU 1K 84 

Ultrabond Turf PU 2K 84 

Ultrabond Turf PU 2K Rapid 84 

Ultrabond Turf Tape 100 84 

Ultracoat Aqua Plus 70 

Ultracoat Binder 70 

Ultracoat Clean Polish 91 

Ultracoat Clean WPM 91 

Ultracoat Easy Plus 70 

Ultracoat EL 70 

Ultracoat High Traffic 70 

Ultracoat Oil 70 

Ultracoat Oil Care 71 

Ultracoat Pad 92 

Ultracoat Polish Remover 92 

Ultracoat Premium Base 71 

Ultracoat Roller Combi 92 

Ultracoat Roller Finish 92 

Ultracoat Roller Oil 93 

Ultracoat Roller Plus 93 

Ultracoat Roller Quick 93 

Ultracoat SR 93 

Ultracoat Steel Spatula 94 

Ultracoat Universal Base 72 

Ultracoat Universal Cleaner 94 

Ultracolor Plus 47 

Ultralite S1 40 

Ultralite S2 41 

Ultramastic 2 42 

Ultramastic III 42 

Ultramastic 5 42 

Ultraplan 17 

Ultraplan Eco 17 

Ultraplan Maxi 18 

Ultratop 106 

Ultratop Living 107 

Ultratop Stucco 107 

V VAGLIATA* 221 

VG15* 221 

VG035* 221 

VG16SS* 222 

VG17FS* 222 

Vinavil 03V 178 

W WallGard Graffiti Barrier 192 

WallGard Graffiti Remover Gel 192 

5

The great figures 

of the Mapei 

Group 

Founded in Milan in 1937, Mapei is today’s world 

leader in the production of adhesives and 

chemical products for building. The Group 

now counts 68 subsidiaries with 59 production 

facilities in operation over 28 countries and 

5 continents, all of them provided with a Quality 

Control Laboratory. 

The WORLD 

of MAPEI 

2.1 

59 

more than 

1400 

7500 

more than 

billion euros 

total turnover 

plants worldwide in the 

5 continents in 28 different countries 

products for Building 

employees of which 900 in our 

18 R&D Centres 

20000 tons 

of products shipped each day 

more than 

55000 customers worldwide

15 production lines The most advanced products and technical systems 

in the building industry. Carry out your project with 

Mapei: 15 lines and more than 1400 products. Mapei 

has developed a sales and technical service network 

with offices all over the world and offers an efficient 

Technical Assistance Service and consultancy from 

project to building site. 

The WORLD 

of MAPEI 

PRODUCTS FOR CERAMICS 

AND STONE MATERIALS 

PRODUCTS FOR RESILIENT 

AND TEXTILE MATERIALS 

PRODUCTS FOR WOODEN FLOORING 

PRODUCTS FOR CEMENTITIOUS 

AND RESIN FLOORING 

PRODUCTS FOR ACOUSTIC INSULATION 

PRODUCTS FOR BUILDING 

PRODUCTS FOR STRUCTURAL STRENGTHENING 

PRODUCTS FOR THE REPAIR 

OF MASONRY 

PRODUCTS FOR THERMAL INSULATION 

WALL PROTECTIVE AND 

DECORATIVE COATINGS 

PRODUCTS FOR WATERPROOFING 

ELASTIC SEALANTS AND ADHESIVES 

ADMIXTURES FOR CONCRETE 

PRODUCTS FOR UNDERGROUND 

CONSTRUCTIONS 

GRINDING AIDS FOR CEMENT 


Certification-proof 

No need 

for greenwashing 

Mapei’s technologically-advanced products, certified 

according to the most strict and demanding 

international standards, have always played a major 

part in the design and creation of large building 

projects, representing Italian excellence all around 

the world. 

Safe products for the environment, workers 

and end users. 

( ) 

To develop eco-sustainable products, you cannot wash them green. 

You have to invest in research and have your products certified by 

internationally recognized institutions. 

Mapei’s long-lasting commitment to the environment 

results in plenty of products which have been awarded 

international certifications and contribute to achieving 

eco-sustainable buildings.

Certification-proof 

Choose Mapei for your eco-sustainable projects. 

No need for greenwashing. 

You have to believe, invest in research 

and have your products certified by official, 

internationally-recognised organisations 

to create eco-sustainable projects. 

Mapei does not invent certification; 

it is awarded to Mapei all over the world. 

The GREEN WORLD 

of MAPEI 

CONSTANT INVOLVEMENT IN RESPECT 

FOR THE ENVIRONMENT AND MANKIND 

Our products are: 

based on the innovative R&D labs of Mapei Group 

formulated with recycled, ultra-light material 

with a very low VOC content 

developed to reduce energy consumption 

safe for the environment, installers and end users 

manufactured locally by eco-sustainable plants 

More than 150 MAPEI products to help designers and contractors create innovative LEED projects 

which comply with the Green Building Council. LEED The Leadership in Energy and Environmental Design. 


Carry out your project 

with Mapei 

Use Mapei in your next certified project. 

Mapei’s technologically-advanced products, 

certified according to the most severe and 

demanding standards, have always played 

a part in the design and creation of large 

building projects, representing Italian 

excellence all around the world. 

TECHNOLOGY YOU CAN BUILD ON

CERTIFIED QUALITY AND COMMITMENT TO THE ENVIRONMENT 

IN COMPLIANCE WITH EUROPEAN STANDARDS 

ADHESIVES FOR CERAMIC TILES 


GROUT 

Drop 

Effect 

MAPEI IS A GUARANTEE OF THE QUALITY, ENVIRONMENT AND SAFETY MANAGEMENT SYSTEM IN ACCORDANCE 

TO THE NORMS ISO 9001, ISO 14001, EMAS AND OHSAS 18001 

Mapei SpA, since 1995 has enforced the 

Quality System certified according to 

UNI EN ISO 9001. The program also entailed 

the ISO 9001 certification of many other 

subsidiaries in the Group. 

Mapei Group's main productions and distribution 

centres enforce the Environmental Management 

System in accordance with the ISO 14001 

standard. 

MAPEI ADHESIVES AND GROUTS FOR CERAMIC TILES AND STONE MATERIALS, PRE-BLENDED MORTARS FOR 

SCREEDS AND FOR REPAIRING CONCRETE, ECO ADHESIVES AND ADMIXTURES FOR CONCRETE ARE CE MARKED AND 

CERTIFIED IN COMPLIANCE WITH THE MOST SEVERE EUROPEAN AND INTERNATIONAL STANDARDS 

ADHESIVE AND GROUTS 

FOR CERAMIC TILES 

All Mapei adhesives have been awarded 

the CE mark in compliance with EN 12004, 

Appendix ZA, Standard. 

All Mapei grouting mortars for ceramics 

and stone material conform to Standard 

EN 13888. 

PRE-BLENDED MORTARS FOR SCREEDS 

AND SMOOTHING SURFACES 

Mapei pre-blended mortars for screeds and 

smoothing surfaces comply with EN 13813 

standards and have been awarded the 

CE mark in compliance with EN 13813, 

Appendix ZA. 

GEV 

® 

EMICODE 

EMAS (Environmental Management and 

Audit Scheme) is the EU environmental 

management system in accordance to the 

CE 761/01 regulation. 

Mapei takes part in the global Responsible 

Care initiative developed by the chemical 

industry for the chemical industry, and every 

year publishes an Environmental Declaration 

for each facility. 

ADHESIVES FOR RESILIENT, 

TEXTILE, WOOD AND CERAMIC 

FLOORS AND COATINGS 

Since October 2005, Mapei’s Eco range of 

products, previously tested by qualified 

international institutes, have been certified 

and labelled EMICODE EC1 "very low emission 

level of volatile organic compounds" and since 

june 2010, EMICODE EC1 Plus "very 

low emission level of volatile organic 

compounds-Plus", recognised by GEV 

(Gemeinschaft Emissionskontrollierte 

Verlegewerkstoffe, Klebstoffe und Bauprodukte 

e.V.) association for the control of emissions in 

flooring installation; Mapei is also a member. 

The certification of these products 

was recently widened to include 

Der Blaue Engel (Blue Angel), a German 

ecological label which identifies products 

which respect the environment, floor layers 

and end users. 

In the year 2000 the plant of Robbiano 

di Mediglia (Milan) obtained the 

certification of its occupational health 

and safety management system in 

accordance with the OHSAS 18001 

standard, as well as the Certificate 

of Excellence that attests to its 

compliance with the requirements 

of the ISO 9001, ISO 14001, OHSAS 

18001 standards and of CE 761/01 

(EMAS) Regulation. 

Certification of Mapei’s products and systems for Quality, Environmental 

Management and Health and Safety have been issued by official standards bodies, 

accredited and recognised at international level. 

PRODUCTS AND SYSTEMS FOR PROTECTING 

AND REPAIRING CONCRETE 

Mapei products for protecting and repairing 

concrete structures have been awarded the 

CE mark in compliance with EN 1504 standards 

(part 2, 3, 4, 5, 6 and 7). 

ADMIXTURE FOR CONCRETE 

Mapei plasticizers and superplasticizers 

for mortars and concrete have been awarded 

the CE mark in compliance with EN 934-2, 

EN 934-4 and EN 934-5 standards. 

MAPEI PRODUCTS ARE BASED ON THE MOST INNOVATIVE TECHNOLOGIES FOR ENVIRONMENTAL AND HUMAN WELLBEING 

BioBlock ® 

This Mapei technology blocks various 

types of mould from forming and 

proliferating in humid conditions. 

DropEffect ® 

Mapei technology based on the use 

of special hydrophobic additives, 

to obtain water-repellent surfaces, 

less prone to dirtiness and with 

excellent durability. 

...beyond apparent sustainability 

Low 

Low Dust 

Mapei’s Low Dust technology reduces dust 

emissions during the mixing, working and 

application phases of powdered products 

by 90%, with advantages particularly for the 

environment and the health of installers 

Our commitment to the environment 

More than 150 MAPEI products assist Project 

Designers and Contractors create innovative 

LEED (The Leadership in Energy and 

Environmental Design) certified projects, 

in compliance with the U.S. Green Building Council. 

MORTARS FOR RENDER 

Mapei mortars for render have been awarded 

the CE mark in compliance with EN 998-1 

and EN 998-2 standards. 

LEED - Leadership in Energy and 

Environmental Design 

Certification developed by the US Green Building Council 

for the design and construction of eco-compatible buildings.

SCREEDS AND SMOOTHING 

COMPOUNDS

14 

1. SCREEDS AND SMOOTHING COMPOUNDS 

1.1 Screeds _______________________________________________________________________________ 

Mapecem 

Special quick-setting and drying 

(24 hours), controlled-shrinkage 

hydraulic binder for screeds. 

Gravel 0-8 

Blend of aggregates for MAPECEM, 

assorted grain size from 0 to 8 mm. 

Mapecem Pronto 

Pre-blended, ready-to-use, quicksetting 

and drying (24 hours), 

controlled-shrinkage mortar for screeds. 

Topcem 

Special normal-setting, quick-drying 

(4 days), controlled-shrinkage hydraulic 

binder for screeds. 

EN 13813 

TECHNICAL DATA: 

Recommended mixing ratio: 350÷450 kg of 

MAPECEM for 1 m³ of aggregates (diameter from 

0 to 8 mm) and with 80-160 kg of water according 

to the moisture content of the inerts. 

Workability time: 20-30 minutes. 

Set to light foot traffic: after 2-3 hours. 

Waiting time before laying: 

– 3 hours for ceramic tiles and stone material; 

– 24 hours for resilient and wood coverings. 

Residual humidity after 24 hours: less than 2%. 

Storage: 12 months. 

Application: tapping and flattening with a straight 

edge. 

Consumption: 3.5-4.5 kg/m² per cm of thickness. 

Packaging: 20 kg bags. 


Size of aggregate: assorted grain size from 0 to 

8 mm. 

Consumption: 1.5 kg/m² per mm of thickness. 



Mixing ratio: 1 25 kg bags of MAPECEM PRONTO 

with approximately 2.2 litres of water. 



Waiting time before laying: 

– 3 hours for ceramic tiles and stone material; 

– 24 hours for resilient and wood coverings. 

Residual humidity after 24 h.: less than 2%. 



edge. 

Consumption: 20 kg/m² per cm of thickness. 



Recommended mixing ratio: 200÷250 kg of 

TOPCEM with 1 m³ of aggregates (diameter from 0 

to 8 mm) and 120-140 kg of water for dry inerts. 

Workability time: 40÷60 minutes. 

Set to light foot traffic: after 12 hours. 

Waiting time before laying: 24 hours for ceramic tiles, 

2 days for natural stone and 4 days for resilient and 

wood coverings. 

Residual humidity after 4 days: less than 2%. 



edge. 

Consumption: 2-2.5 kg/m² per cm of thickness. 

Packaging: 20 kg bags.

Topcem Pronto 

Ready-to-use, normal-setting, 

controlled-shrinkage mortar for 

quick-drying (4 days) screeds. 

Topcem Pronto C60 

Ready-to-use, normal-setting, 

controlled-shrinkage mortar for quickdrying 

(4 days) screeds with high 

chemical resistance. 


Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 

1.7 litres of water. 







EMICODE: EC1 R Plus - very low emission. 



edge. 

Consumption: 18-20 kg/m² per cm of thickness 

according to the grade of compacting. 



Mixing ratio: 1 25 kg bags of TOPCEM PRONTO C60 

with 1.9 litres of water. 










edge. 

Consumption: 18-20 kg/m² per cm of thickness. 

according to the grade of compacting. 


1.2 Sand and cement screeds _____________________________________________________________________ 

NEW 

NEW 

Mapefibre ST24/ST42 

Structural polymer fibres for 

cementitious concrete and screeds. 

May be used to completely or partially 

substitute conventional reinforcement. 

Available in lengths of 24 and 42 mm. 

Mapescreed 704 

NEW 

Special plasticising and water-reducing 

additive for cementitious screeds, 

including heated and cooling screeds. 

NEW 

EN 13813 

C60-F8 

A1 fl 

EN 13813 


Dosage: from 1 to 7 kg per cubic metre of mix. 

Packaging: 6 kg polyethylene bags. 


Dosage: from 1 to 1.5 kg every 100 kg of cement. 

Packaging: 10 and 25 kg cans. 

15

16 


1.3 Smoothing compounds ___________________________________________________________________ 

Fiberplan 

Self-levelling, fibre-reinforced, quickhardening 

smoothing compounds for 

thicknesses of from 3 to 10 mm. 

Particularly recommended for wood. 

Nivorapid 

Quick-drying, thixotropic, cementitious 

smoothing compound for thicknesses of 

from 1 to 20 mm, including on vertical 

surfaces. 

Pianocem M 

Thixotropic cementitious smoothing 

compound for thicknesses from 1 to 

15 mm, including on vertical surfaces. 

Pianodur R 

Fine-grained, ultra quick-setting 

self-levelling smoothing compound 

for thicknesses up to 3 mm, for floors 

subject to intense traffic. 

CA 

LEVELLING 

COMPOUNDS 

C25-F7 

A2 fl-s1 

EN 13813 

LEVELLING 

COMPOUNDS 

C40-F10 

A2 fl-s1 

EN 13813 

LEVELLING 

COMPOUNDS 

C25-F7 

2 

EN 13813 


Where to use: internal ceramic, natural stone, resilient 

and wooden floors. 


Thickness applied: from 3 to 10 mm. 

Set to light foot traffic: approx. 3 hours. 


natural stone, parquet and resilient coverings. 

Colour: pinky grey. 

Application: trowel or rake. 






Where to use: internal floors and walls for ceramic, 

natural stone, resilient and wooden coatings. 

Workability time: 15 minutes. 



Waiting time before laying: 4-6 hours for ceramic 

tiiles and natural stone, 12 hours for parquet and 

resilient coverings. 

Colour: grey. 



Application: metal trowel. 




Where to use: internal floors and walls for resilient 

coatings. 

Workability time: 4 hours. 


Set to light foot traffic: from 4 to 24 hours according 

to the surrounding temperature. 

Waiting time before laying: 3 days for resilient 

coverings. 

Colour: grey. 


Application: trowel. 




Where to use: internal floors for resilient coatings. 

Workability time: 20÷30 minutes. 

Thickness applied: up to 3 mm. 

Set to light foot traffic: 3 hours. 

Waiting time before laying: 12 hours for resilient 

coverings. 

Colour: grey. 


Application: trowel or rake. 



Planipatch 

Fine-grained, ultra quick-drying, 

thixotropic cementitious smoothing 

compound for thicknesses from 

0 to 10 mm, including on vertical 

surfaces. 

Planopur 

Two-component, self-levelling, flexible, 

polyurethane levelling compound for 

all types of substrate, especially the 

deformable type. 

Ultraplan 

Self-levelling, ultra quick-hardening 

smoothing compound for thicknesses 

from 1 to 10 mm. 

Ultraplan Eco 



from 1 to 10 mm, with a very low 

emission level of volatile organic 

compounds (VOC). 

CEMENTITIOUS 

SCREED 

C35-F7 

1 

EN 13813 

LEVELLING 

COMPOUNDS 

C30-F7 

A2 fl-s1 

EN 13813 

CA 

LEVELLING 

COMPOUNDS 

C25-F7 

A2 fl-s1 

EN 13813 


Where to use: internal floors and walls for ceramic, 

natural stone, resilient and wooden coatings. 

Workability time: approx. 10 minutes. 



Waiting time before laying: 4-6 hours for ceramic 

tiles and natural stone, 12 hours for resilient coverings. 

EMICODE: EC1 Plus - very low emission. 

Colour: grey. 







Application temperature range: from +10°C to 

+30°C. 

Set to light foot traffic: after approximately 12 hours. 

Waiting time before laying: approx. 15 hours. 

Colours: Comp. A: beige, comp. B: brown. 

Application: rake or smooth metal trowel. 


Consumption: approx. 1.5 kg/m² per mm of 

thickness. 

Packaging: 14 kg units. 


Where to use: internal floors for ceramic, natural 

stone, resilient and wooden coatings. 





natural stone, resilient and wood coverings. 

Application: trowel, rake or pump. 












Waiting time before laying: 12 hours for ceramic 

tiles, natural stone and resilient coverings, 24 hours 

for wood. 

Application: trowel, rake or pump. 






17

18 


Ultraplan Maxi 



from 3 to 30 mm. 

1.4 Products for levelling substrates ____________________________________________________________ 

Adesilex P4 

Quick-hardening cementitious levelling 

compound for internal and external 

surfaces. 

Nivoplan 

Smoothing mortar for internal and 

external walls and ceilings for 

thicknesses from 2 to 30 mm. 

Planitop Fast 330 

Quick-setting, fibre-reinforced 

cementitious levelling mortar for internal 

and external floors and walls, applied 

in layers from 3 to 30 mm to even out 

irregularities. 

LEVELLING 

COMPOUNDS 

C35-F7 

A2 fl-s1 

EN 13813 

EN 12004 


CEMENTITIOUS ADHESIVE FOR CERAMIC TILES 

EN 12004 

EN 998-1 

IN COMPLIANCE WITH 

EUROPEAN STANDARD 

EN 998-1 

GP-CS IV 

RENDERING AND 

PLASTERING MORTAR 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 

SURFACE PROTECTION 

SYSTEMS FOR CONCRETE 







Waiting time before laying: from 12 to 24 hours for 

ceramic tiles and natural stone, from 24 to 72 hours for 

resilient and wood coverings (according to thickness). 

Application: trowel or pump. 


Colour: grey. 





Where to use: on floors for ceramic and natural stone 

coatings. 

Workability time: more than 60 minutes. 



Application: N° 6 or 10 rounded notched trowel. 


Colour: grey. 


Consumption: 4-10 kg/m². 



Where to use: on walls for ceramic and natural stone 

coatings. 

Workability time: 2-3 hours. 


Waiting time before laying ceramic and natural 

stone: 4 hours, according to thickness. 


Colours: grey and white. 





Where to use: internal walls and floors for ceramic 

and natural stone coatings. 

Workability time: approximately 20 minutes. 


Waiting time before laying ceramic and natural 

stone: 4 hours, varies according to the surrounding 

temperature. 

Application: smooth trowel. 

Colour: grey. 




PRODUCTS FOR SOUNDPROOFING

22 

2. PRODUCTS FOR SOUNDPROOFING 

Mapesilent Band 

L-shaped, closed-cell, expanded 

polyethylene adhesive membrane 

applied to perimeter walls and around 

the edges of elements which pass 

through screeds to avoid the formation 

of acoustic bridges. 

Mapesilent Band R 

Closed-cell, expanded polyethylene 

adhesive strip applied to perimeter 

walls and around the edges of elements 

which pass through screeds to avoid 

the formation of acoustic bridges. 

Mapesilent Door 

U-shaped, closed-cell, expanded 

polyethylene adhesive membrane 

applied in correspondence with 

openings in perimeter walls to avoid the 

formation of acoustic bridges. 

Mapesilent Panel 

Tiles with a bitumen and special 

polymer-based elasto-plastomeric 

membrane with polyester reinforcement, 

sandwiched to a resilient layer of 

polyester fibre. 


Thickness: 6 mm. 

Width at base: 50 mm. 

Height: 100 mm / 160 mm. 

Length: 2 m. 

Packaging: 

– cardboard boxes containing 105 profiles 100 mm 

high by 2 m long; 

– cardboard boxes containing 64 profiles 160 mm 

high by 2 m long. 




Height: 100 mm / 160 mm. 

Length: 50 m. 

Packaging: cellophane package with 4 rolls 50 m 

long. 




Pitch: 105-110 mm. 

Height: 100 mm. 

Packaging: cardboard boxes containing 30 pieces. 


Tensile strength: 

– longitudinal: 700 N/50 mm; 

– transversal: 500 N/50 mm. 

Impact strength: 900 mm. 

Resistance to static perforation: 15 kg. 

Impermeability to water: > 100 KPa. 

Reaction to fire: F. 

Apparent dynamic stiffness (S’t): 10 MN/m³. 

Dynamic stiffness for calculation purposes (S’): 

21 MN/m³. 

Reduction of noise caused by footsteps (ΔLw): 

28 dB (*). 

Thermal resistance (R): 0.313 m²K/W. 

Nominal thickness: 13 mm. 

Format: 1000 mm x 1000mm tiles. 

Weight: 5 kg/m². 

Packaging: pallets containing 75 m². 

(*) calculated on a 300 kg/m² brick-cement floor slab.

Mapesilent Roll 

Sheets with a bitumen and special 

polymer-based elasto-plastomeric 

membrane with polyester reinforcement 

sandwiched to a resilient layer of 

polyester fibre, and a surface coated 

with blue, non-woven polypropylene 

fabric. 

Mapesilent Tape 

Adhesive sealing tape made in closedcell 

expanded polyethylene. 

Mapesonic CR 

Rolls of soundproofing mat applied 

before laying ceramic, stone, resilient 

and multi-layered wooden floors. 


Tensile strength: 

– longitudinal: 700 N/50 mm; 

– transversal: 500 N/50 mm. 

Impact strength: 900 mm. 

Resistance to static perforation: 15 kg. 

Impermeability to water: > 100 KPa. 

Reaction to fire: F. 

Apparent dynamic stiffness (S’t): 15 MN/m³. 

Dynamic stiffness for calculation purposes (S’): 

47 MN/m³. 

Reduction of noise caused by footsteps (ΔLw): 

22.8 dB (*). 

Thermal resistance (R): 0.145 m²K/W. 

Nominal thickness: 8 mm. 

Format: 10 x 1 m rolls with a 5 cm border. 

Weight: 1.8 kg/m². 

Packaging: pallets containing 160 m². 

(*) calculated on a 300 kg/m² brick-cement floor slab. 



Width: 100 mm. 

Length: 25 m. 

Packaging: boxes containing 12 rolls 25 m long. 


Thickness: 2 mm, 4 mm. 

Format: 

– 30 x 1 m (2 mm thick) sheets; 

– 30 x 1 m (4 mm thick) sheets. 

Density (kg/m³): 700. 

Colour: brown-black. 

Tensile strength EN ISO 1798 (N/mm²): 0.6. 

Elongation at failure EN ISO 1798 (%): 20. 

Application temperature range: from +5°C to +35°C. 

Fire resistance class EN 13501: Cfl-s1. 

Reduction of noise from footsteps EN ISO 140-8: 

17 dB. 


Certification: N° KB-050107K TS - MAPESONIC CR 

2 mm + parquet. 

N° KB-050107I TS - MAPESONIC CR 2 mm + ceramic. 

23

PRIMERS, BONDING PROMOTERS, 

CONSOLIDATING AND 

WATERPROOFING PRODUCTS

26 

3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS 

Biblock 

Two-component, epoxy curing product 

in water dispersion for concrete with 

consolidating and anti-dust properties. 

Eco Prim Grip 

Multi-purpose, ready-to-use bonding 

promoter and primer made from 

synthetic acrylic resin and silica 

inerts with a very low emission level 

of volatile organic compounds (VOC) 

for render, smoothing and levelling 

compounds and adhesives for 

ceramic tiles. 

Eco Prim PU 1K 

One-component, solvent-free, moisture 

curing polyurethane primer with a very 


compounds (VOC) for consolidating and 

waterproofing cementitious screeds. 

Eco Prim PU 1K Turbo 

One-component, solvent-free, moisture 

curing, rapid-drying polyurethane 

primer with a very low emission level 


for consolidating and waterproofing 

cementitious screeds. 


Consistency: comp. A: thick liquid; comp. B: liquid. 

Colours: comp. A: straw yellow; comp. B: amber. 

Mixing ratio: comp. A : comp. B = 1 : 1. 



Application: brush, roller or spray. 

Consumption: 0.10-0.15 kg/m². 

Packaging: 2.5 kg + 2.5 kg drums. 


Consistency: creamy liquid. 

Colour: grey. 

Waiting time before applying render: 15-20 minutes. 

Waiting time before applying smoothing 

compounds: 30 minutes. 



Application: roller or brush. 


Packaging: 10 kg and 5 kg drums. 


Consistency: liquid. 

Colour: brown. 


Waiting time before laying parquet using reactive 

adhesives: min. 24 hours, max. 3 days. 

Waiting time before laying parquet or smoothing 

layer on surfaces sprinkled with quartz: 36 hours. 

EMICODE: EC1 R - very low emission. 




Packaging: 10 kg drums. 




Set to light foot traffic: 30-40 minutes. 

Waiting time before laying parquet using reactive 

adhesives: min. 2 hours, max. 24 hours. 

Waiting time before laying parquet or smoothing 

layer on surfaces sprinkled with quartz: 

12-24 hours. 




Consumption: 0.2-0.4 kg/m² per coat. 

Packaging: 10 kg drums.

Eco Prim T 

Solvent-free acrylic primer with a very 


compounds (VOC) for absorbent and 

non-absorbent substrates. 

Eporip 

Two-component epoxy adhesive for 

monolithic sealing cracked screeds. 

Eporip Turbo 

Two-component, quick-hardening 

polyester resin for monolithic sealing 

cracked screeds. 

Livigum 

Admixture for cementitious mortar 

and smoothing compounds. 

EN 1504-4 



EN 1504-4 

STRUCTURAL BONDING 


Consistency: fluid liquid. 

Colour: white. 

Dilution rate: as is on non-absorbent surfaces, 1 : 1 

or 1 : 2 on absorbent surfaces. 


compounds: 1-5 hours according to the surrounding 

conditions and the absorption of the substrate. 





Packaging: 5 and 20 kg drums. 


Consistency: comp. A: fluid paste; 

comp. B: fluid paste. 

Colours: comp. A: black; comp. B: white. 


Setting time: 24 hours. 


Open time: 5 hours. 


Application: brush, trowel or by pouring. 

Consumption: 1.35 kg/dm³. 

Packaging: 2 kg and 10 kg kits. 


Consistency: comp. A: fluid paste; comp. B: fluid 

paste. 

Colours: comp. A: grey; comp. B: white. 


Setting time: 20-30 minutes. 



Application: pouring. 

Consumption: 1.7 kg per dm³ of filled cracks. 

Packaging: 508 g metal cans (component A: 500 g; 

component B: 8 g). 


Consistency: thick liquid. 


Dilution rate: with water at a ratio of 1 : 4 - 1: 5 for 

priming. 

Storage: 12 months. Protect from frost. 

Consumption: according to dilution rate. 

Packaging: 5, 10 and 25 kg drums. 

27

28 


Malech 

Water-based acrylic undercoat and 

bonding promoter with a smooth finish. 

Mapecoat I 600 W 

Two-component transparent epoxy 

primer in water dispersion. 


Lucido 

Two-component, shiny, transparent 

epoxy primer in water dispersion. 

Mapeprim SP 

Two-component, solvent-free primer for 

smoothing compounds and adhesives 

on non-absorbent surfaces. 



Colour: transparent. 

Density (EN ISO 2811-1) (g/cm³): approx. 1.01. 

Dry solids content: (EN ISO 3251) (%): approx. 15. 

Dilution rate: ready-to-use; 30-50% of water for 

surfaces with low absorbency. 

Waiting time before applying other products: 

24 hours. 


Cleaning: water. 


Application: roller, brush or spray. 

Consumption (kg/m²): 0.10-0.15. 

Packaging: 2 and 10 kg. 


Consistency of mix: fluid. 

Colour of mix: opaline. 

Mixing ratio: comp. A: comp. B = 2.3 : 3.6. 


Dust dry at +23°C and 50% R.H.: 3-4 hours (first 

coat); 6-8 hours (second coat). 

Final hardening time: 7 days. 


Storage: 24 months in its original sealed packaging. 

Application: roller, spray or airless spray. 

Consumption: 300-500 g/m² according to the 

absorption. 

Packaging: 5.9 kg kits (A + B). 





Workability time: 2-3 h. 

Dust dry at +23°C - 50% R.H.: 

– 3-4 h (first coat); 

– 6-8 h (second coat). 





Consumption: 300-500 g/m² according to absorption. 



Consistency: comp. A: liquid; comp. B: liquid. 

Colours: comp. A: blue; comp. B: white. 


Workability time: approximately 1 hour. 


compound: from 1 to 3 hours. 

Maximum waiting time before applying smoothing 

compound: 24 hours. 

Application: brush, roller or smooth trowel. 



Packaging: 

8 kg kits (4+4); 

4 kg kits (2+2).

Planicrete 

Synthetic latex rubber to improve 

adhesion and strength of cementitious 

mortars. 

Primer 3296 

Acrylic primer in water dispersion with 

high penetration, consolidating and antidust 

properties for screeds. 

Primer BI 

Synthetic resin primer in solvent, 

specifically produced to improve the 

bond of polyurethane coating products 

(from the PURTOP range) on old 

bitumen membranes. 

Primer EP 

Two-component epoxy primer 

in solvents for consolidating and 

waterproofing cementitious screeds 

and industrial floors. 



Dry solids content: 40%. 


Consumption: 

– for adhesive slurry: 100-150 g/m²; 

– to prepare screeds and render: 50-80 kg/m³. 

Packaging: 5, 10 and 25 kg canisters and 12x1 kg 

packages. 



Colour: opaline. 

Dilution ratio: as is, 1: 1 or 1:2 according to the 

absorption of the substrate. 

Drying time: 1-5 days. 

Waiting time before laying with vinyl adhesive: 

when dry. 


Application: brush, roller or watering can. 






Density according to EN ISO 2811-1 (g/cm³): 0.96. 

Dry solids content (%): 10. 



Ready for painting over: 2-4 hours. 

Drying time: 5-6 hours at +20°C. 

Consumption: 0.20 kg/m² per coat, depending on the 

type of the substrates. 

Packaging: 10 kg. 


Minimum waiting time: 24 hours according to the 

porosity of the substrate. 








Packaging: 5+5 kg drums. 

29

30 


Primer EP Rustop 

Two-component epoxy primer for metal 

surfaces. 

Primer G 

Synthetic resin primer in water 

dispersion with a very low content of 

volatile organic compounds (VOC). 

Primer G Conductive 

Dark-coloured, solvent-free conductive 

synthetic resin primer in water 

dispersion. 

Primer KL 

Bonding promoter in solvent for twocomponent 

epoxy, epoxy-polyurethane 

and polyurethane adhesives and thinner 

for PRIMER MF. 


Mixing ratio: comp. A: comp B. = 100 : 30. 

Colour of mix: white. 

Consistency of mix: liquid. 

Dry substances content (%): 70. 

Density of mix (kg/m³): 1,100. 

Viscosity of mix (mPa·s): 500 (# 3 - 50 rpm). 

Workability time: 15-20 minutes at +20°C. 

Surface temperature: at least +10°C. 

Pot life: 6 h at +20°C. 

Varnishing: after 6-8 h at +20°C. 

Dusty dry: after 2 h at +20°C. 

Final hardening time: 24 h. 


Application: by brush, roller or airless spray system. 

Consumption: 0.2 kg/m². 

Packaging: 5 kg kits (A + B). 



Colour: blue. 

Dilution rate: from 1:1 to 1: 3 with water according 

to the absorption of the substrate. 

Drying time: 2 hours according to the dilution rate 

and the absorption of the substrate. 

Application: brush. 

EMICODE: EC1 - very low emission. 


Consumption: 0.1-0.2 kg/m² according to use. 

Packaging: 5, 10 and 25 kg drums and 12x1 kg 

boxes. 



Colour: black. 

Drying time: minimum 2 hours. 

Electrical resistance: 50,000 ohm. 







Colour: pinky transparent. 

Dilution rate: PRIMER KL : PRIMER MF = 1: 6. 

Drying time: 5 minutes. 


Application: cotton rag. 


Packaging: boxes 0f 12x0.8 litre bottles and 8 kg 

metal drums.

Primer M 

One-component, solvent-free primer 

for polyurethane sealants, for use on 

absorbent and non-absorbent surfaces. 

Primer MF 

Two-component, solvent-free epoxy 

primer used as bonding promoter for 

products from the MAPEFLOOR range, 


against residual damp on cementitious 

substrates and as anti-dust impregnator 

on concrete floors. 

Primer MF EC Plus 

Two-component, solvent-free, lowviscosity, 

epoxy primer with a very 


compounds for consolidating and 

waterproofing cementitious substrates. 

Primer P 

One-component primer for sealants 

applied on plastics. 




Inflammable: no. 

Application temperature: from +5°C to +35°C. 

Drying time: 40 minutes. 



Consumption: 1.5-2 g/m (for a 1 cm deep joint). 

Packaging: 250 g bottles. 



Colour: transparent yellow. 


Waiting time before laying floors or applying 

smoothing compound: 24-48 hours according to 

the surrounding temperature. 





Packaging: 1 kg (A+B) and 6 kg (A+B) units. 



Colour: transparent yellow. 



smoothing compound: 24 hours. 




Application: roller, brush or flat trowel. 


Packaging: 5 kg units (A + B). 


Application of sealant: after 20’. 

Colours: transparent. 


Consumption: 150 g/m² (10-50 g/metre of treated 

1 cm-deep joint). 

Packaging: 150 g canisters. 

31

32 


Primer PU60 

Moisture curing polyurethane resin for 

consolidating and waterproofing damp 

screeds. 

Primer S 

Waterproofing primer in water 

dispersion. 

Primer SN 

Two-component epoxy primer with 

fillers. 

May be coloured with MAPECOLOR 

PASTE. 

Prosfas 

Water-based, solvent-free consolidator 

with high penetration properties for 

cementitious substrates. 




Dilution ratio: from 25 to 100% with THINNER PU. 

Set to light foot traffic: 3-8 hours according to 

dilution ratio. 

Hardening time: 24 hours. 

Waiting time before laying with reactive adhesive: 

2-7 days. 







Colour: pink. 

Waiting time between each coat: 20-30 minutes. 

Waiting time before laying coating: 

approx. 12 hours. 

Application: brush or roller. 


Consumption: 0.1 kg/m² per coat. 

Packaging: 5 kg bottles and 12x1 kg boxes. 


Mixing ratio: component A : component B = 80 : 20. 

Colour of mix: neutral. 

Consistency of the mix: dense fluid. 

Density of mix (kg/m³): 1500. 

Viscosity of the mix (mPa·s): 1,200. 

Pot life: 30 min. 


Dust dry at +23°C and 50% R.H.: 2-4 hours. 

Set to light foot traffic at +23°C and 50% R.H.: 

12 hours. 

Final setting time: 7 days. 

Application: flat American trowel or smooth trowel. 

Consumption: 0.3-0.6 kg/m² per coat, depending on 

the absorbency and characteristics of the substrate. 

Packaging: 20 kg units: 

– component A = 16 kg; 

– component B = 4 kg. 




Drying time: according to the absorbency of the 

substrate. 


Application: brush, flat brush or roller 


Packaging: 25 kg tanks.

Quartz 1.2 

Calibrated silica sand to improve the 

bond on resin or epoxy primers. 

Thinner for adhesives 

N.B. Packaging approved according to 

ADR as specified in Ministerial Decree 

22/2/1990. 

Thinner PU 

Thinners for PRIMER PU60. 

Triblock P 

Three-component epoxy-cementitious 

primer for waterproofing damp 

substrates, including the non-absorbent 

type. 


Colours: grey - beige. 

Grain size: 0.7-1.2. 





Inflammable: yes. 


Consumption: 0.25-1 litre per litre of PRIMER PU60 

according to dilution rate considered. 



Consistency: comp. A liquid; comp. B liquid; 

comp. C powder. 

Colours: comp. A white; comp. B white; 

comp. C white. 

Mixing ratio: 

comp. A : comp. B : comp. C = 12 : 38 : 50. 


Waiting time between first and second coat: 

4-6 hours. 


smoothing compound: 18 hours. 

Maximum waiting time before laying floors or 

applying smoothing compound: 7 days. 


Application: brush or roller. 


Packaging: 5 kg drums (A+B+C). 

33

ADHESIVES FOR CERAMIC TILES 

AND STONE MATERIAL

36 

4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL 

4.1 Hydraulic binder based adhesives ___________________________________________________________ 

Adesilex P4 

High-performance, self-buttering, 

quick-setting grey cementitious 

adhesive for ceramic tiles and stone 

material (thickness of adhesive from 

3 to 20 mm). 

N.B. May also be used for smoothing 

internal and external surfaces. 

Adesilex P4 is CE marked, as declared in 

ITT certificate n° 25070275/Gi (TUM) 

issued by the Technische Universität 

München laboratory (Germany) and 

as declared in ITT certificate 

n° 1220.6/10/R03 NPU issued by 

the Istitute ITB Katowice (Poland) 

Adesilex P9 

High-performance cementitious 

adhesive with no vertical slip and 

extended open time for ceramic tiles 

(thickness of adhesive up to 5 mm). 

Adesilex P9 is CE marked, as declared 

in ITT certificate n° 25050141/Gi 

(TUM) and n° 25080230/Gi (TUM) 


München laboratory (Germany) and in 

ITT certificates n° 1220.1/10/R03 

NPU; 1220.3/10/R03 NPU; 

1220.2/10/R03 NPU and 

1220.4/10/R03 NPU issued by the 

Istitute ITB Katowice (Poland) 

Adesilex P10 

High-performance, white cementitious 

adhesive with no vertical slip and 

extended open time for glass mosaic, 

ceramic and marble coatings (thickness 

of adhesive up to 5 mm). 

Adesilex P10 is CE marked, as 

declared in ITT certificate 

n° 25080061/Gi (TUM) issued by 

the Technische Universität München 

laboratory (Germany) and in ITT 

certificates n° 2008-B-2749/13 

and 2008-B-2749/16 issued by the 

Istitute MPA Dresden (Germany) 

Elastorapid 

Two-component, high-performance, 

highly-deformable, quick-setting and 

drying cementitious adhesive with no 

vertical slip and extended open time 

for ceramic tiles and stone material 


Elastorapid has been awarded 

CE certification, as indicated in ITT 

certificate N° 25070277/Gi (TUM) 

and 25080024/Gi (TUM) issued by 


laboratory (Germany). 

EN 12004 



EN 12004 

EN 12004 



EN 12004 

EN 12004 



EN 12004 

EN 12004 

C2FTE 

S2 



EN 12004 


Where to use: floors only. 

Pot life of mix: more than 60 minutes. 

Open time 20 minutes. 

Waiting time before grouting: 4 hours. 


Ready for use: approx. 24 hours. 

Colour: grey. 

Application: N° 6 or 10 notched rounded trowel. 






Pot life of mix: more than 8 hours. 

Open time: ≥ 30 minutes. 

Waiting time before grouting: 

– on walls: 4-8 hours; 

– on floors: 24 hours. 


Ready for use: approx. 14 days. 


Application: N° 4, 5 or 6 notched trowel. 




Packaging: 25 kg bags and 4x5 kg boxes. 
















Pot life of mix: 60-75 minutes. 

Open time: ≥30 minutes. 


Set to light foot traffic: approx. 2-3 hours. 

Ready for use: approx. 24 hours (3 days for basins and 

swimming pools). 

Deformability according to EN 12004: S2 - highly 

deformable. 


Application: N° 4, 5, 6 or 10 notched trowel. 

Storage: part A: 12 months; part B: 24 months. Protect 

from frost. 


Packaging: 

ELASTORAPID white: 31.25 kg kit 

comp. A: 25 kg / comp. B: 6.25 kg. 

ELASTORAPID grey: 31.25 kg kit 

comp. A: 25 kg / comp. B: 6.25 kg.

Granirapid 


deformable, quick-setting and drying 

cementitious adhesive for ceramic tiles and 

stone material (thickness of adhesive up to 

10 mm). 

Granirapid is CE marked, as declared in 

ITT certificates n° 85330201.101 (SFV) 

issued by the Säurefliesner-Vereinigung e.V. 

Grossburgwedel laboratory (Germany) and 

n° 25070279/Gi (TUM), n° 25080057/ 

Gi (TUM) and n° 25080060/Gi (TUM) 


München laboratory (Germany) and in ITT 

certificates n° 2008-B-2749/17 and 

2008-B-2749/21 issued by the Istitute 

MPA Dresden (Germany). 

Isolastic 

Elasticising latex mixed with 

KERABOND, KERABOND T, 

KERAFLOOR and ADESILEX P10. When 

KERABOND is mixed with ISOLASTIC 

it forms a high-performance, highly 

deformable adhesive with extended 

open time (C2E/S2). 

When KERABOND T and KERAFLOOR 

are mixed with ISOLASTIC, they form 

high-performance (C2/S2), highly 

deformable adhesives. When 

ADESILEX P10 is mixed with 

ISOLASTIC (dilution rate 1:1 with water), 

it forms a high-performance, highly 

deformable adhesive with no vertical 

slip and extended open time (C2TE/S1). 

Kerabond + Isolastic is CE marked, 

as declared in ITT certificates n° 

25070081/Gi (TUM) and 

n° 25080048/Gi (TUM), Kerabond T 

+ Isolastic is CE marked, as declared 

in ITT certificates n° 25070265-1/Gi 

(TUM) and n° 25080055/Gi (TUM), 

and Adesilex P10 + Isolastic is CE 

marked, as declared in ITT certificate 




Kerabond 

Cementitious adhesive for ceramic tiles 


Kerabond has been awarded 






EN 12004 

C2F S1 



EN 12004 

EN 12004 



EN 12004 


Consistency: comp. A: powder; comp. B: thick liquid. 

Colours: comp. A: grey and white; comp. B: white. 


Mixing ratio: comp. A: 25 kg + comp. B: 5.5 kg. 

Pot life of mix: 45 minutes. 


Open time: 20 minutes. 


Set to light foot traffic: 3-4 hours. 

Ready for use: 24 hours. 

Colours available: grey and white. 





Packaging: GRANIRAPID white: 28 kg kit 

component A: 22.5 kg sack 

component B: 5.5 kg tub. 

GRANIRAPID grey: 30.5 kg kit 

component A: 25 kg sack 

component B: 5.5 kg tub. 


KERABOND/KERABOND T/KERAFLOOR+ISOLASTIC: 





– on floors: 24-36 hours. 




deformable (ADESILEX P10 + ISOLASTIC diluted 1:1 

with water - S1 deformable). 

Application: KERABOND/KERABOND T + ISOLASTIC: 

N° 4, 5 or 6 notched trowel. 

KERAFLOOR/ISOLASTIC: N° 6 or 10 notched trowel 

for KERAFLOOR. 

ADESILEX P10/SOLASTIC diluted 1:1 with water: 

N° 4, 5 or 6 notched trowel. 




boxes. 















37

38 


Kerabond T 

Cementitious adhesive with no vertical 

slip for ceramic tiles (thickness of 

adhesive up to 5 mm). 

Kerabond T is CE marked, as declared 

in ITT certificates n° 25050176-1/Gi 

(TUM) and n° 25080238/Gi (TUM) 


München laboratory (Germany) and in 

ITT certificates n° 1220.8/10/R03 

NPU; 1220.10/10/R03 NPU and 

1220.9/10/R03 NPU issued by the 

Istitute ITB Katowice (Poland). 

Keracrete 

Synthetic latex rubber mixed with 

KERACRETE POWDER (white or grey) 

or with sand and cement (thickness up 

to 5 mm). 

Keracrete Powder 

Ready to use mixture of sand and 

cement mixed with KERACRETE latex. 

This mixture forms a high-performance 

adhesive with no vertical slip and is 

suitable for ceramic tiles, glass mosaic 

and stone material (thickness of 


Keracrete + Keracrete Powder 

has been awarded CE certification, 

as indicated in ITT certificate 

N° 25040276/Gi (TUM) and 

25080247/Gi (TUM) issued by 



Keraflex 

High-performance cementitious adhesive 

with no vertical slip and extended 

open time for ceramic and stone tiles 


Keraflex is CE marked, as declared in 

ITT certificates n° 25040476/Gi (TUM) 

and ITT n° 25080239/Gi (TUM) 



certificates n° 1220.12/10/R03 NPU; 

1220.14/10/R03 NPU; 

1220.11/10/R03 NPU and 

1220.13/10/R03 NPU issued by 

the Istitute ITB Katowice (Poland) 

EN 12004 



EN 12004 

EN 12004 



EN 12004 

EN 12004 



EN 12004 

EN 12004 



EN 12004 
















KERACRETE + KERACRETE POWDER: 




- on walls: 4-6 hours; 

- on floors: 24 hours. 

Set to light foot traffic: approx. 3 days. 

Ready for use: approx. 14 days (21 days for basins 

and swimming pools). 

Colours available: – KERACRETE POWDER: 

grey and white. 



Mixing ratio: 4 kg with 1 kg of KERACRETE. 

Storage: 

– KERACRETE: 24 months. Protect from frost. 

– KERACRETE POWDER: 12 months. 

Consumption: 

– 0.5-1 kg/m² of KERACRETE; 

– 2-4 kg/m² of KERACRETE POWDER. 

Packaging: 

KERACRETE: 5, 10 and 25 kg drums; 

KERACRETE POWDER: 25 kg bags. 














Packaging: 25 kg bags and 4x5 kg boxes.

Keraflex Easy 

Easy-to-apply, high-performance 

cementitious adhesive with good backbuttering 

properties, for ceramic and stone 

tiles. Very low emission level of volatile 

organic compounds. Particularly suitable 

for laying large porcelain tiles on large 

spreads of flooring areas, applied at a 

thickness up to 10 mm. 

Keraflex Easy is CE approved, 

as declared in ITT certificates n° 

25080254/Gi and n° 25080400/Gi 

(TUM) issued by the Technische 

Universität München laboratory 

(Germany). 

Keraflex Maxi S1 

High-performance deformable 

cementitious adhesive with no vertical 

slip, extended open time and Low Dust 

technology for ceramic tiles, particularly 

recommended for laying large porcelain 

and natural stone tiles (thickness of 

adhesive from 3 to 15 mm). 

Keraflex Maxi S1 has been awarded 


certificate n° 25070387/Gi (TUM) 




Kerafloor 



Kerafloor is CE marked, as declared 

in ITT certificates n° 25050161/Gi 

and n° 25080270/Gi (TUM) issued 

by the Technische Universität München 


Keraquick 

High-performance, quick-setting, 

deformable cementitious adhesive with 

no vertical slip and extended open time 

for ceramic tiles and stone material 

stable in the presence of humidity 


Keraquick has been awarded 

CE certification, as indicated in 

ITT certificate N° 25070276/Gi 

(TUM), 25080059/Gi (TUM) and 




EN 12004 



EN 12004 

EN 12004 

C2TE S1 



EN 12004 

EN 12004 



EN 12004 

EN 12004 

C2FT S1 



EN 12004 



Open time: > 30 minutes. 






Colours: white and grey. 














Deformability according to EN 12004: S1 - 

deformable. 





Packaging: 

– grey: 25 kg bags; 

– white: 23 kg bags. 






– on floors: 24-36 hours. 




Application: N° 6 or 10 notched trowel or trowel 

for KERAFLOOR. 








Waiting time before grouting: 2-3 hours. 


Ready for use: approx. 24 hours (3 days for basins 


Deformability according to EN 12004: 

S1 - deformable. 







39

40 


Keraset 



Keraset is CE marked, as declared 

in ITT certificate n° 71230101.101 

(SFV) issued by the Säurefliesner- 

Vereinigung e.V. Grossburgwedel 

laboratory (Germany) and 



laboratory (Germany) and in certificates 

ITT n° 2008-B-2749/01 and 

2008-B-2749/04 issued by the 


Latex Plus 

Elasticising latex mixed with 

KERAQUICK. 

When KERAQUICK is mixed with LATEX 

PLUS it forms a high-performance, 

quick-setting, highly-deformable 

adhesive with no vertical slip (C2FT/S2). 

Kerafloor + Latex Plus has been 

awarded CE certification, as indicated in 

ITT certificate N° 25080065/Gi 



(Germany). 

Tixobond White 

High-performance, ultra-white 

cementitious adhesive with no vertical 

slip and long open time for ceramic tiles 


Tixobond White has been awarded 




München laboratory (Germany). 

Ultralite S1 

One-component, high-performance, 

deformable cementitious adhesive 

with no vertical slip, long open time, 

Low Dust technology and extremely 

high yield easy to apply by trowel, for 

ceramic tiles and stone material. 

Ultralite S1 has been awarded CE 

certification, as indicated in ITT 

certificate N° 25080237/Gi issued by 



EN 12004 



EN 12004 

EN 12004 



EN 12004 

EN 12004 

C2TE S1 



EN 12004 

Contains > 30% recycled content 


Pot life of mix: 6-8 hours. 














LATEX PLUS + KERAQUICK: 





Ready for use: approx. 24 hours. (3 days for basins 



deformable. 


Storage (LATEX PLUS): 24 months. Protect from frost. 

Consumption: to be calculated according to the 

amount of KERAQUICK and mixing ratio. 
























Deformability according to EN 12004: S1 - 

deformable. 

Colour: grey and white. 





Ultralite S2 

One-component, high-performance, 

highly-deformable, lightweight 

cementitious adhesive with extended 

open time, very high yield, easy to 

trowel and good buttering capacity, for 

ceramic tiles and stone, ideal for thin 

porcelain tiles. 

Ultralite S2 has been awarded CE 

certification, as indicated in ITT 

certificates n° 25110055/AG (TUM) 

and 25110056/AG (TUM) issued by 


laboratory (Germany) 

4.2 Synthetic resin-based adhesives ____________________________________________________________ 

Adesilex P22 

Ready-to-use adhesive paste with no 

vertical slip and long open time for 

ceramic tiles (thickness of adhesive up 

to 5 mm). 

Adesilex P22 is CE marked, as declared 




(Germany) and in ITT certificates 

n° 2009-B-4835/01 and 

2009-B-4835/04 issued by the 


Adesilex P25 

Ready-to-use adhesive paste with no 

vertical slip and long open time for 

ceramic tiles (thickness of adhesive up 

to 5 mm). 

Adesilex P25 has been awarded 


certificate N° LR-04-085 (CSTB) 

issued by the Centre Scientifique et 

Technique du Bâtiment, Champs sur 

Marne laboratory (France). 

Fix & Grout Brick 

Ready to use, high-performance 

adhesive paste with BioBlock ® 

anti-mould technology for bonding brick 

slips and light weight cementitious and 

synthetic resin conglomerate decorative 

elements on internal and external 

surfaces. 

Fix & Grout Brick is CE marked, 

as declared in ITT certificate 



laboratory (Germany) 

EN 12004 

C2E S2 



EN 12004 

Contains > 20% recycled content 

EN 12004 


DISPERSION ADHESIVE FOR CERAMIC TILES 

EN 12004 

EN 12004 



EN 12004 

EN 12004 



EN 12004 





- on walls: 4-8 hours; 

- on floors: 24 hours. 

Set to foot traffic: approx. 24 hours. 

Waiting time before putting into service: approx. 14 

days. 


deformable. 


Application: n° 4, 5, 6 or 10 notched trowel. 


Consumption: 0.8 kg/m² per mm of thickness, 

equivalent to 1.5-2.5 kg/m². 

Packaging: 15 kg sacks. 


Where to use: walls only. 



Ready for use: 7-14 days. 

Deformability: highly deformable. 


Application: N° 4 or 5 notched trowel. 



Packaging: 5, 12 and 25 kg drums and 1x12 packs. 


Where to use: walls only. 












Adjustment time: 30-35 minutes. 

Grouting: clean off adhesive which runs out of the 

joint with a damp brush within 20 minutes (depending 

on surrounding conditions). 

Colours: white, grey and beige. 

Application: notched trowel or brush. 




41

42 


Ultramastic 2 

Ready-to-use, high performance 

adhesive paste with no vertical slip for 

laying ceramic tiles. 

Ultramastic 2 has been awarded 





Ultramastic III 

Ready-to-use, high-performance 

adhesive paste with no vertical slip 

and long open time, for laying ceramic 

tiles on walls and floors (thickness of 


Ultramastic III is CE marked, as 

declared in ITT certificate 




certificates n° 2009-B-4835/06 

and 2009-B-4835/09 issued by the 


Ultramastic 5 

Ready-to-use, high-performance 

adhesive paste with no vertical slip 

and long open and adjustment time 

for ceramic tiles. Ideal for absorbent 

substrates. 

Ultramastic 5 has been awarded 





Keralastic 

Two-component, high-performance 

polyurethane adhesive for ceramic tiles 

and stone material. 

Keralastic is CE marked, as declared 




(Germany) and in 2008-B-2748/13.1, 

2008-B-2748/14.1 and 

2008-b-2748/15.1 certificates issued 

by the Istitute MPA Dresden (Germany). 

EN 12004 



EN 12004 



EN 12004 



EN 12004 



Adjustment time: up to 30-35 minutes according 

to the absorption of the substrate, the tiles and the 

surrounding conditions. 








Consumption: 1.5-2.5 kg/m² on walls; 3-4 kg/m² 

on floors. 




Adjustment time: up to 35-40 minutes according 

to the absorption of the substrate, the tiles and the 









Consumption: 

– 1.5-2.5 kg/m² on walls; 

– 3-4 kg/m² on floors. 

Packaging: 1, 5, 12 and 16 kg drums. 



Adjustment time: up to 50 minutes according to 

the absorption of the substrate, the tiles and the 









Consumption: 

– 1.5-2.5 kg/m² on walls; 

– 3-4 kg/m² on floors. 


4.3 Reactive adhesives ______________________________________________________________________ 

EN 12004 

EN 12004 

EN 12004 


REACTION RESIN ADHESIVE FOR CERAMIC TILES 

EN 12004 










Consumption: 2.5 -5 kg/m². 

Packaging: 5 and 10 kg units (A:B = 94:6 parts in 

weight).

Keralastic T 

Two-component, high-performance 

polyurethane adhesive with no vertical 

slip for ceramic tiles and stone material. 

Keralastic T is CE marked, as declared 

in ITT certificates n° 2504321/Gi 

and n° 25040471 (TUM) issued by 


laboratory (Germany) and in 

2008-B-2748/16.1, 2008-B- 

2748/17.1 and 2008-b-2748/18.1 

certificates issued by the Istitute MPA 

Dresden (Germany). 

Kerapoxy Adhesive 

Two-component epoxy adhesive with 

no vertical slip for ceramic tiles and 

stone material. 

Kerapoxy Adhesive is CE marked, 

as declared in ITT certificate n° 




certificates n° 2008-B-2748/4.1, 

2008-B-2748/5.1 and 

2008-B-2748/6.1 issued by the 

Istitute MPA Dresden (Germany). 

EN 12004 



EN 12004 

EN 12004 



EN 12004 










Consumption: 2.5 -5 kg/m². 

Packaging: 5 and 10 kg units (A:B = 94:6 parts in 

weight). 





Ready for use: 2 days. 


Application: suitable notched trowel. 




43

GROUTS FOR CERAMIC TILES

46 

5. GROUTS FOR CERAMIC TILES 

5.1 Cementitious grouts ______________________________________________________________________ 

Fugolastic 

Polymer liquid admix for 

KERACOLOR FF, KERACOLOR GG 

and KERACOLOR SF. 

Keracolor FF 

Pre-blended, high-performance, 

polymer-modified cementitious mortar 

with water-repellent DropEffect ® 

technology for grouting joints up to 

6 mm wide. 

Keracolor GG 

Pre-blended, high-performance 

polymer-modified cementitious mortar 

for grouting joints 4 to 15 mm wide. 

Keracolor SF 

Fine-grained, high-performance white 

cementitious mortar for grouting joints 

up to 4 mm wide. 


FUGOLASTIC + KERACOLOR: 

Pot life of mix: approx. 2 hours. 

Waiting time before finishing: 10-20 minutes. 



Application: rubber MAPEI trowel or rake. 

Finishing: MAPEI sponge or Scotch-Brite ® pad. 

Storage of FUGOLASTIC: 24 months. Protect from 

frost. 

Consumption: according to the size of the joints. 


packages. 






Colours: 18 different colours from the MAPEI 

“Coloured Grouts” range. 




Storage: 12 months (22-25 kg bags), 24 months 

(5 kg bags). 


Packaging: 22-25 kg bags and 4x5 kg boxes, 

according to the colour. 



Waiting time before finishing: 

10-20 minutes. 








Storage: 12 months (22-25 kg bags), 24 months 

(5 kg bags). 


Packaging: 25 kg bags and 4x5 kg boxes, according 

to the colour. 










Storage: 12 months (22 kg bags), 24 months (5 kg 

bags). 


Packaging: 22 kg bags and 4x5 kg boxes, according 

to the colour.

Ultracolor Plus 

High-performance, anti-efflorescence, 

quick-setting and drying polymermodified 

mortar with water-repellent 

DropEffect ® and anti-mould BioBlock ® 

technology for grouting joints 2 to 

20 mm wide. 

Kerapoxy 


anti-acid epoxy mortar and adhesive 

with no vertical slip for laying and 

grouting ceramic tiles and stone material 

(minimum width of joints 3 mm). 

Kerapoxy is CE marked, as declared in 

ITT certificate n° 25040322/Gi 



(Germany) and in ITT certificates n° 

2008-B-2748/7.1, 

2008-B-2748/8.1 and 

2008-B-2748/9.1 issued by the 


Kerapoxy CQ 

Easy-to-apply, two-component, antiacid 

epoxy mortar with excellent 

cleanability properties for grouting joints 

at least 2 mm wide. 





Ready for use: 24 hours (48 hours for basins and 

swimming pools). 



Application: rubber trowel. 



Storage: 

– 12 months (23 kg bags); 

– 24 months (1 and 5 kg bags). 


Packaging: 23 kg bags and 4x5 kg and 9x1 kg boxes, 

according to the colour. 

5.2 Epoxy grouts ___________________________________________________________________________ 

Kerapoxy Design 

Two-component, anti-acid, decorative, 

translucent epoxy mortar for grouting 

glass mosaic, ceramic tiles and stone 

material, used in combination with 

MAPEGLITTER for a particularly 

attractive and high quality finish. 

May also be used for bonding. 

EN 12004 



EN 13888 


REACTION RESIN GROUT 

EN 12004 

EN 13888 



EN 13888 



EN 12004 



EN 12004 





Ready for use: 4 days. After 4 days surfaces may be 

exposed to chemicals. 



Application: suitable trowel. 


Consumption: 

- for grouting: according to the size of the joints; 

- for bonding: 2-4 kg/m². 

Packaging: 5 and 10 kg units and 12x2 kg boxes. 




Ready for use: after 4 days surfaces may be exposed 

to chemicals. 

Colours: 113 cement grey, 114 anthracite, 132 beige, 

282 bardiglio grey, 283 sea blue and 290 cream. 

Application: rubber MAPEI trowel. 

Finishing: MAPEI cellulose sponge. 






Open time (adhesive): 30 minutes. 

Adjustment time (adhesive): 60 minutes. 


Ready for use: after 4 days surfaces may be exposed 

to chemicals. 

Colours: 15: 700 translucent (neutral), 702 silver grey, 

710 ice white, 716 pink, 720 pearl grey, 728 dark grey, 

729 sahara, 730 turquoise, 731 dark brown, 740 blue, 

744 mandarin, 750 red, 760 gold, 770 anthracite and 

799 white. 

Application: suitable trowel. 

Finishing: MAPEI cellulose sponge. 




47

48 

5. GROUTS FOR CERAMIC TILES 

Kerapoxy IEG 

Two-component epoxy mortar with 

extremely high chemical resistance for 

grouting joints at least 3 mm wide. 

Kerapoxy P 

Easy-to-apply, two-component, 

anti-acid epoxy mortar with good 

cleanability properties for grouting joints 

at least 3 mm wide. 

Kerapoxy SP 

Three-component epoxy mortar with 

high chemical resistance for grouting 

ceramic tiles (minimum width of joint 

5 mm). 

MapeGlitter 

Polyester, aluminium and epoxy resin 

metal-effect coloured glitter mixed 

with used for mixing with KERAPOXY 

DESIGN. 

EN 13888 



EN 13888 



EN 13888 








Colours: 113 and 130. 


Finishing: Scotch Brite ® pad and MAPEI sponge 

(or single-head rotary polisher with Scotch Brite ® type 

abrasive felt disk and rubber rake). 









Colours: 113 and 130. 


Finishing: Scotch Brite ® pad and MAPEI sponge 

(or single-head rotary polisher with Scotch Brite ® type 

abrasive felt disk and rubber rake). 







Ready for use: 24 hours. After 24 hours surfaces may 

be exposed to chemicals. 

Colour: neutral. 

Application: small trowel and tamping rod. 

Finishing: rag dipped in ethanol and single-head 

rotary brush. 





Maximum dosage: 10% in weight of 

KERAPOXY DESIGN. 

Colours: silver and light gold. 22 other colours 

available upon request. 

Packaging: boxes of 10x100 g packets.

5.3 Ready-to-use paste products _______________________________________________________________ 

Flexcolor 

Ready-to-use, polymer filler paste 

with water-repellent DropEffect ® and 

anti-mould BioBlock ® technology for 

grouting joints in ceramic tiles 2 to 

10 mm wide. 


Waiting time before finishing: from 15-20 minutes, 

according to surrounding conditions and absorption 

of the tiles. 



Colours: 100 white, 111 silver-grey and 132 

beige 2000. 


Finishing: Scotch-Brite ® pad and MAPEI sponge. 




49

SYSTEMS FOR LAYING 

AND GROUTING PORPHYRY 

AND INTERLOCKING STONE

52 

6. SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE 

Keracolor PPN 

High-strength, quick-setting pozzolan 

mortar with very low water absorption 

for grouting paved floors with joints 

from 5 to 30 mm wide subject to heavy 

loads and intense traffic. 

Mapestone PFS 2 

Pre-blended mortar for grouting 

architectonic stone floors, exposure 

class XF4, with high compressive 

strength and good resistance to 

de-icing salts and freeze-thaw cycles. 

Mapestone PFS PCC 2 

Pre-blended, polymer-modified mortar 

with a low modulus of elasticity, 

high compressive strength and good 

resistance to de-icing salts and freezethaw 

cycles, exposure class XF4, for 

grouting architectonic stone floors. 

Mapestone TFB 60 

Pre-blended mortar with high 

compressive strength and good 

resistance to de-icing salts and freezethaw 

cycles, exposure class XF4, for 

installation screeds for architectonic 

stone flooring. 

C60-F8 

A1 fl 

EN 13813 



Set to light foot traffic: 1 hour. 

Ready for use: 3 days for light to medium traffic, 

7 days for heavy traffic. 

Colour: 113 cement grey. 


Cleaning: MAPEI sponge or Scotch Brite ® pad (or 

single-head rotary polisher with Scotch Brite ® type 

abrasive felt disk). As an alternative, hydro-cleaner 

once it has started to harden. 


Consumption: according to the size of the joints and 

slabs. 




Set to foot traffic: 6 hours. 

Waiting time before putting into service: 7 days. 

Colour: grey. 


Cleaning: MAPEI sponge or Scotch-Brite ® pad (or 





Consumption: according to the size of the joints 

and slabs. 






Colour: grey. 


Cleaning: MAPEI sponge or Scotch-Brite ® pad (or 





Consumption: according to the size of the joints 

and slabs. 



Mixing ratio: 1 25 kg sack of MAPESTONE TFB 60 

with 1.8-2 l of water. 


Grouting joints: fresh on fresh. 


Consumption: 20 kg/m² per centimetre of thickness. 

Packaging: 25 kg.

ELASTIC SEALANTS AND ADHESIVES

56 

7. ELASTIC SEALANTS AND ADHESIVES 

7.1 Acetic silicone sealants ___________________________________________________________________ 

Mapesil AC 

Pure, anti-mould, acetic silicone 

sealant with BioBlock ® technology for 

movements up to 25%. 

Certification: 

ISO 11600 F 25 LM. 

DIN 18540 

BS 5889 

ASTM C 920 

TT S 00230C 

TT S 001543A 

Mapesil Z 

Acetic silicone sealant for glass for 


Mapesil Z Plus 

Mould-resistant acetic silicone sealant 

for sanitary fittings for movements 

up to 20%. 

Mapesil 300°C 

Acetic silicone sealant for high 

temperatures. 


Movement in service: 25%. 

Modulus of elasticity at 100% elongation: 

0.35 N/mm². 

Shore A hardness: 20. 


Colours: transparent + 26 colours coordinated with 

the “MAPEI Coloured Grouts” range. 

Application: extrusion gun. 

Consumption: 3.1 metres per 310 ml cartridge 

(10x10 mm section). 

Packaging: 310 ml cartridges. 




0.36 N/mm². 


Workability time: 25’. 

Colours: transparent and black. 








0.36 N/mm². 



Colours: transparent and white. 








0.60 N/mm². 


Workability time: 6’ (+23°C, 50% R.H.). 

Colours: black. 




Packaging: 300 ml cartridge.

7.2 Polyurethane sealants and adhesives ________________________________________________________ 

Mapeflex PB25 

Two-component, thixotropic, modifiedpolyurethane 

sealant resistant to 

hydrocarbons with a low modulus of 

elasticity, for movements up to 25%. 

ISO 11600 F 25 LM 

Mapeflex PB27 

Two-component, castable, modifiedpolyurethane 

sealant resistant to 

hydrocarbons with a low modulus of 

elasticity, for movements up to 25%. 

ISO 11600 F 25 LM 

Mapeflex PU20 

Two-component, high-strength, 

castable epoxy-polyurethane sealant 

with high chemical resistance for 


ISO 11600 F 7.5 P 

Mapeflex PU21 


castable epoxy-polyurethane sealant for 





0.35 N/mm². 





Application: trowel, extrusion gun. 

Consumption: 0.14 kg/m (10x10 mm section). 

Packaging: 10 kg drums (A+B). 




0.35 N/mm². 





Application: by pouring. 








Colour: 113 grey. 













57

58 


Mapeflex PU30 


thixotropic epoxy-polyurethane sealant 

with high chemical resistance for 


ISO 11600 F 7.5 P 

Mapeflex PU40 

Paintable polyurethane sealant with a 

low modulus of elasticity for movements 

up to 25%. 

ISO 11600 F 25 LM 

Mapeflex PU45 

Paintable polyurethane sealant and 

adhesive with a high modulus of 

elasticity for movements up to 20%. 

ISO 11600 F 20 HM 

Mapeflex PU50 SL 

Paintable, castable polyurethane 

sealant with a low modulus of elasticity 

for movements up to 25%. 

ISO 11600 F 25 LM 







Application: trowel, extrusion gun. 






0.33 N/mm². 



Colours: white and grey (other colours upon request). 



Consumption: 

– 3.0 metres per 300 ml cartridge; 

– 6.0 metres per 600 ml soft-cartridges (10x10 mm 

section). 

Packaging: 300 ml cartridges, 600 ml soft-cartridges. 


Movement in service: 20% 


0.80 N/mm². 


Workability time: 1 hour. 

Colours: 

– white, grey, black (300 ml cartridge); 

– grey, black (600 ml soft cartridge). 

Certification: ISO 11600 F 20 HM, certified in Poland 

as suitable for contact with drinking water. 



Consumption: 

– 3.0 metres per 300 ml cartridge; 

– 6.0 metres per 600 ml tube (10x10 mm section). 

Packaging: 300 ml cartridges, 600 ml soft-cartridges. 




0.32 N/mm². 



Colour: grey. 

Application: by pouring with extrusion gun. 

Consumption: 6.0 metres per 600 ml soft-cartridge 


Packaging: 600 ml soft-cartridges.

Mapeflex PU65 

Two-component, castable polyurethane 

sealant for road joints flush with the 

surface. 

Mapesil BM 

Neutral silicone sealant for metal-work 


ISO 11600 F 25 LM 

ISO 11600 G 25 LM 

Mapesil LM 

Neutral silicone anti-mould sealant 

with BioBlock ® technology for stone 


ISO 11600 F 25 LM 

ISO 11600 G 25 LM 

ASTM C 920 

ASTM C 1248 

DIN 18540 

DIN 18545-2 

BS 5889 

TT S 00230C 

TT S 001543A 





Set to light foot traffic: 70-80 minutes. 



Consumption: 1.2 kg/litre (10x10 mm section). 


7.3 Neutral silicone sealants __________________________________________________________________ 




0.30 N/mm². 



Colours: transparent, grey, copper and dark brown. 








0.30 N/mm². 



Colours: transparent, 100 white, 110 grey, 

112 grey, 113 cement grey, 114 anthracite, 

120 black, 130 jasmine and 132 beige 2000 

(see “MAPEI Coloured Grouts”). 




7.4 Acrylic sealants and adhesives _____________________________________________________________ 

Mapeflex MS45 

Hybrid sealant and adhesive with a high 

modulus of elasticity. 

ISO 11600 F 20 HM 




0.80 N/mm². 



Colours: white, grey. 

Certification: ISO 11600 F 20 HM, certified in Poland 

as suitable for contact with drinking water. 



Consumption: 3.0 meters per 300 ml cartridge 


Packaging: 300 ml cartridge. 

59

60 


7.5 Other sealants __________________________________________________________________________ 

Mapeflex AC4 

Paintable acrylic sealant for movements 

up to 12.5%. 

ISO 11600 F 12.5 P up 

Mapeflex AC-FR 

Paintable acrylic sealant for fire-break 

joints with movements up to 12.5%. 

Resistant to fire for up to 212 minutes. 

EN 1366-4 

Mapeflex AC-P 

Paintable acrylic sealant with a rendereffect 

finish for movements up to 

12.5%. 

Mapeflex AC-PRO 

Pro-grade paintable acrylic sealant for 

movements up to 12.5%. 


Movement in service: 12.5%. 


0.20 N/mm². 










0.12 N/mm². 



Colour: grey. 



Packaging: 550 ml soft-cartridges. 




0.10 N/mm². 










0.12 N/mm². 




Application: gun for soft-cartridges. 



Packaging: 550 ml tsoft-cartridges.

Mapeflex Blackfill 

Bituminen sealant. 

Mapeflex 

Firestop 1200°C 

Refractory grout. 

Ultrabond Super Grip 

Adhesive for mounting internal fixtures. 

Adesilex T Super 

Adhesive for welding high-pressure 

PVC pipes. 


Movement in service: plastic product. 


Elongation at failure: 65%. 

Colours: black. 

Application: extrusion gun, trowel. 





Movement in service: none. 


Final hardening time: 4 mm / 24 hours. 

Colours: grey. 

Application: extrusion gun, trowel. 





Viscosity: creamy thixotropic paste. 

Density: 1.45 kg/l. 

Open time: 10-15 minutes. 

Initial tensile strength: 25 N/cm². 

Final tensile strength: 400 N/cm² (wood/wood). 

Initial shear strength: 250 N/cm² (wood/wood). 

Final shear strength: 300 N/cm² (wood/wood). 

Hardening time: 24-48 hours. 


EMICODE: EC1R Plus - very low emission. 



Consumption: 15 metres per 310 ml cartridge 

(φ 5 mm bead). 


7.6 Adhesives for PVC _______________________________________________________________________ 


Viscosity: fluid liquid. 

Final tensile strength: like the bonded PVC-pipe. 


Colour: red. 


Consumption: according to requirements. 

Packaging: 90 g tubes. 

61

62 


7.7 Accessories and primers for sealants ________________________________________________________ 

Mapefoam 

Closed-cell, extruded foam polyethylene 

cord used as a support for elastomer 

sealants to gauge the correct size of 

flexible joints. 

Supplied in rolls in various lengths 

according to the diameter of the foam. 

Primer AS 

One-component primer for polyurethane 

sealants for absorbent substrates. 

Primer EP 

Two-component epoxy primer in solvent 


cementitious screeds and industrial 

floorings. 

Primer FD 

One-component primer for silicone 

sealants. 


Density: 40 kg/m³. 

Diameters and packaging: 

Ø 6 mm, boxes of 2500 m 







Application of sealant: after 60 minutes. 

Colour: transparent straw yellow. 

Consumption: 6-9 g/m (1 cm - deep joint). 



Workability time after mixing: 4-5 hours. 

Application of sealant: after 24 hours: 



Consumption: 3-9 g/m (1 cm - deep joint). 

Packaging: 10 kg met. drums (A+B). 



Colour: transparent straw yellow. 


Consumption: 3-9 g/m (1 cm-deep joint). 

Packaging: 200 and 900 g bottles.

Primer M 

One-component solvent-free primer 

for polyurethane adhesives for 

non-absorbent surfaces. 

Primer P 

One-component primer for sealants 

applied on plastics. 

Primer PU60 

Polyurethane, hydro-curing resin for 

consolidating and waterproofing damp 

screeds. 




Consumption: 1.5-2 g/m (1 cm - deep joint). 



Application of sealant: after 20’. 

Colours: transparent. 


Consumption: 150 g/m² (10-50 g/metre of treated 

1 cm-deep joint). 

Packaging: 150 g canisters. 


Application of sealant: after 24 hours: 




Packaging: 10 kg met. drums. 

63

ADHESIVES AND FINISHING 

PRODUCTS FOR PARQUET

66 

8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET 

8.1 Adhesives for wooden and laminate floors ____________________________________________________ 

New Formula 

Adesilex LC/R 

Quick-setting, solvent-free adhesive in 

water dispersion for bonding wooden 

floors. 

ADESILEX LC/R is suitable for bonding 

on cementitious screeds made from 

MAPECEM, MAPECEM PRONTO, 

TOPCEM or TOPCEM PRONTO, 

wooden substrates, chip-board, 

masonite panels and heated floors. 

Adesilex LC/R-P 

Adhesive in water emulsion for bonding 

parquet on cementitious screeds made 

from MAPECEM, MAPECEM PRONTO, 


wooden substrates, chip-board and 

heated floors. 

Adesivil D3 

Solvent-free, water-resistant vinyl 

adhesive for floating floors in prefinishes 

wood or rigid, melamine and 

laminated amino-plastic. 

Lignobond 

Two-component, water and solvent-free 

epoxy-polyurethane adhesive for laying 

parquet. Suitable for laying any size and 

type of wood on all substrates. 


Consistency: thick paste. 

Colour: beige and brown. 

Open time: approximately 30 minutes. 



Polishing: when completely dry (minimum 10 days). 


Application: N° 2 or 4 notched trowel for wood. 





Colour: beige. 



Polishing: when completely dry (minimum 10 days). 








Dry film: transparent. 


Set to light foot traffic: after approx. 12 hours 

Complete hardening: approximately 24 hours. 

Resistance to water: class D3 (EN 204-205). 


Application: by extrusion from the nozzle on the 

canister. 

Consumption: 0.025 kg/m; 0.1-0.2 kg/m². 

Packaging: 0.5 kg bottles. 


Consistency: comp. A: thick paste; 

comp. B: fluid paste. 

Colour: comp. A: dark brown or beige; 

comp. B: off-white. 



Open time: 1 hour. 



Sanding: after 3 days. 



Consumption: 800-1000 g/m². 

Packaging: 5 kg and 10 kg drums (A+B).

Ultrabond Eco 575 

Solvent-free, synthetic polymer 

adhesive in water dispersion with very 


compounds (VOC) for bonding baseboards 

in place. 

Ultrabond Eco 

P992 1K 

One-component, ready-to-use, solventfree, 

flexible polyurethane adhesive 

with a very low emission level of 

volatile organic compounds (VOC) for 

all types of parquet on screeds made 


TOPCEM and TOPCEM PRONTO, 

cementitious screeds, old wooden 

ceramic, marble and terrazzo floors, etc. 

Also suitable for heated substrates. 

Ultrabond Eco 

S945 1K 

One-component, isocyanate and 

solvent-free, sililated polymer adhesive 

with very low emission level of volatile 

organic compounds for pre-finished, 

multi-layered parquet. 

Ultrabond Eco 

S955 1K 




organic compounds, for all types of 

parquet. 

MAPEI GmbH 

Werk Weferlingen 

Ultrabond Eco S945 1K 

Zulassungsnummer 

Z-155.10-55 

Emissionsgeprüftes 

Bauprodukt nach 

DIBt-Grundsätzen 


Consistency: creamy paste. 



Final hardening time: 24 hours. 



Application: extrusion pistol. 

Consumption: 325 ml every 12 metres. 











Consumption: 0.8-1 kg/m². 

Packaging: 15 kg aluminium bags contained in plastic 

drums. 






EMICODE: EC1 R Plus – very low emission. 





drums. 












drums. 

67

68 


Ultrabond P902 2K 

Two-component epoxy-polyurethane 

adhesive for bonding all types and 

sizes of parquet on screeds made from 

MAPECEM, MAPECEM PRONTO, 


cementitious screeds, old wooden, 

ceramic, marble, and terrazzo 

floors, etc. 




adhesive for medium-sized solid 

wooden slats and all types of 

pre-finished wooden floors. 


One-component, solvent-free 

polyurethane adhesive with a very 


compounds for bonding pre-finished, 

multi-layered parquet. 


One-component, ready-to-use, solventfree, 

flexible polyurethane adhesive for 

all types of parquet on screeds made 


TOPCEM and TOPCEM PRONTO, 

cementitious screeds, old wooden, 

ceramic, marble and terrazzo floors, etc. 



Consistency: comp. A: paste; comp. B: paste. 

Colour: comp. A: beige or brown; comp. B: off-white. 











Consistency: comp. A: paste; comp. B: paste. 

Colour: comp. A: beige or brown; comp. B: beige. 







Application: notched trowel for wood. 

Consumption: according to the type of substrate. 






Application temperature range: from +10°C 

to +35°C. 




Application: notched trowel. 


Packaging: 7 and 15 kg aluminium bags contained 

in plastic drums. 











Packaging: 7 and 15 kg aluminium bags contained 

in plastic drums. Boxes containing 20x600 cc 

soft-cartridges.

Ultrabond S965 1K 




organic compounds, for all types of 

parquet. 

Ultrabond S997 1K 

One-component, solvent-free, 

ready-to-use, flexible, sililate polymerbased 

thixotropic adhesive for laying 

wooden steps and parquet mosaic. 

Silwood 

Acrylic sealant in water dispersion for 

wooden floors. 

Silwood Decking 

Solvent and isocyanate-free, sililated 

polymer sealant with very low emission 

level of volatile organic compounds 

(VOC) with a low modulus of elasticity, 

suitable for sealing all types of 

wooden floors on internal and external 

substrates. 

Ideal for sealing joints in external 

wooden floors and joints between 

different types of flooring materials. 












drums. 


Consistency: thixotropic paste. 

Colour: ochre yellow. 

Open time: approx. 40 ± 10 minutes. 

EMICODE: EC 1 R Plus - very low emission. 

Set to foot traffic: after 12 hours. 


Application: extrusion. 

Consumption: 

– laying wooden steps: 2 m² per soft-cartridge 

(diagonal beads every 5-10 cm); 

– laying three-layered pre-finished parquet: 4/6 m² per 

soft-cartridge (diagonal beads every 10-15 cm); 

– laying wooden baseboards: approximately 15 metres 

of beads of adhesive per soft-cartridge. 

Laying parquet mosaic on walls: 0.5 kg/m². 

Packaging: boxes containing 20 x 600 cc aluminium 

tubes. 

8.2 Paints, stuccos, oils, base coats and coloured sealants for parquet _________________________________ 



Colour: white, oak, iroko, doussie, wengè, teak, 

walnut, cherry, beech, maple and birch. 


Sanding: after 24 hours. After sanding, the product 

may be varnished. 



Application: extrusion pistol loaded with cartridge 

of product. 

Consumption: according to the size of the joint to be 

filled, calculating that its density is equal to 1.75 g/ 

cm³. 



Consistency: paste. 


Sanding and varnishing: 4-5 days after removing 

traces of excess product. 




Consumption: according to the size of the joint. 

Packaging: 600 ml soft-cartridges. 

69

70 


Ultracoat Aqua Plus NEW 

Solvent and NMP-free, odourless, 

water-based binder, mixed with wood 

flour filler, for grouting wooden floors. 

Suitable for ULTRACOAT water-based 

varnishing cycles and ULTRACOAT OIL. 

Ultracoat Binder 

Solvent and NMP-free, water-based 

binder, mixed with wood flour filler from 

any type of wood, for grouting wooden 

floors. Suitable for ULTRACOAT 

water-based varnishing cycles and 

ULTRACOAT OIL. 

Ultracoat 

Easy Plus 

NEW 

NEW 

One-component, water-based 

polyurethane varnish with very low 


compounds (VOC) and no NMP, 

highly resistant to wear and abrasion, 

for wooden floors. Suitable for floors 

subject to frequent pedestrian use. 

Ultracoat EL 

Slow-evaporating mixture to increase 

the open time of varnish for parquet. 


Consistency: liquid gel. 

Colour: off-white. 

Density (g/cm³): 1.0. 

Brookfield Viscosity (mPa·s): 2000-3000. 



+35°C. 

Sanding: after approx. 1 hour. 

Varnishing: after 2 hours with water-based varnish 

cycles. 

Consumption: 100-120 g/m² per coat. 

Packaging: 5 litre drums. 





Brookfield Viscosity (mPa·s): 6000/8000. 



+35°C. 

Sanding: after approx. 1 hour. 

Varnishing: after 100-120 mins. with water-based 

varnishing cycles. 






Gloss factor: extra matte (10 gloss), matte (30 gloss) 

and satin (60 gloss). 

Maximum permitted dilution ratio (Dir. 2004/42/CEE): 

10% with clean water or with ULTRACOAT EL. 

Sanding: after 8 hours. 

Painting: after 3 hours, and within a maximum 

of 5 hours. 

Ready for use: 36-48 hours. 






Consumption: from 5% to 10% of the consumption of 

the varnish according to the dilution rate. 

Packaging: 1 litre drums.

Ultracoat High Traffic NEW 

Two-component, NMP-free, 100% 

polyurethane water-based varnish with 

high resistance to wear and abrasion 

and very low emission of volatile 

organic compounds for wooden floors. 

Suitable for floors subject to extremely 

high pedestrian use 

Ultracoat Oil 

Natural drying oil resin for treating 

wooden floors with an oil finish. 

Ultracoat Oil Care 

Natural drying resin oil in water 

dispersion for finishing wooden floors 

treated with oil. 

Ultracoat 

NEW 

Premium Base 

Two-component, NMP-free, waterbased 

undercoat with very low emission 


and high insulating capacity, for 

preparing solid and pre-sanded wooden 

floors and wooden floors under repair 

for water-based finishing cycles. 


comp. A comp. B 

Consistency: liquid liquid. 

Colour: 

Density of Ultracoat High 

transparent off-white. 

Traffic 10 gloss (g/cm³): 


1.040 1.060. 



1.030 1.120. 



Dusty dry: 25 mins. 

Touch dry: 40 mins. 

1.040 1.080. 

Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% 

with clean water. 


Varnishing (without sanding): after 2 hours, within 5 hours. 

Ready for service: 36-48 hours. 

Gloss factor: (10-30-60 gloss). 

Consumption: first coat 80-100 ml/m²; successive coats 

50-70 ml/m². 

Packaging: 11 l kits (A+B) 2x5.5 l. 


Consistency: fluid. 

Storage: 24 months. Once opened a skin forms on the 

surface and then hardens with time. 

Application: with a roller or trowel (ULTRACOAT OIL 

ROLLER/ULTRACOAT STEEL SPATULA). 

Consumption: 

– absorbent floors: approx. 150 g/m²; 

– floors with low absorbency: approx. 70 g/m². 



Consistency: fluid. 


Application: wax spreader. 

Drying time: 30-60 minutes at +20°C. Complete 

hardening after 24 hours. 

Set to light foot traffic: 1 hour. 


Consumption: approx. 15 g/m². 



comp. A comp. B 

Consistency: liquid liquid. 

Colour: milky white transparent. 

Density (kg/m³): 1.030 1.075. 

Storage: 12 months 12 months. 

EMICODE: EC1 R - very low emission level. 

Duration of mix: 2 hours. 

Mixing ratio: comp. A: comp. B = 5 : 1 (in volume). 

Maximum permitted dilution ratio (Dir. 2004/42/ 

EEC): 10% with clean water or with ULTRACOAT EL. 


Varnishing (without sanding): after 2 hours, within 

5 hours. 


Packaging: 6 litre kits (A+B). 

71

72 


Ultracoat 

NEW 

Universal Base 

One-component, NMP-free, waterbased 

rapid undercoat with very low 

emission of volatile organic compounds, 

for wooden floors. 





Maximum permitted dilution ratio 

(Dir. 2004/42/EEC): 10% with clean water or 

ULTRACOAT EL. 


Varnishing (without sanding) 

(for three-coat cycles): after 2 hours, within 5 hours. 


Packaging: 5 litre kits.

ADHESIVES FOR RESILIENT 

AND TEXTILE COVERINGS

76 

9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS 

9.1 Adhesives in water dispersion ______________________________________________________________ 

Adesilex MT32 

Adhesive in water dispersion for 

laying all types of wall coatings: tufted 

wallpaper, flock-print, heavy fabrics, 

glass fibre fabrics, etc. 

Adesilex TDV 

Ready-to-use adhesive in water 

dispersion for laying non-woven fabric 

and glass fibre coverings. 

Adesilex V4 

Acrylic adhesive in water dispersion 

for bonding resilient floors. 

Adesilex VS45 


for laying PVC and foam PVC wall 

coverings and cork coverings with a 

PVC backing. 



Colour: white 

Waiting time: from 0 to 10 minutes. 

Open time: maximum 30 minutes. 


Application: N°1 notched trowel on the wall or, after 

dilution, by roller on the coating. 





Colour: white 

Waiting time: 0-10 minutes. 


Waiting time before painting: 24 hours. 

Storage: 12 months (protect from frost). 

Application: by roller or notched trowel. 





Colour: white 



Set to light foot traffic: after approximately 2-4 hours. 










Open time: maximum 30-40 minutes. 




Packaging: 1, 5, 12 and 25 kg drums.

Aquacol T 

Solvent-free, ultra quick-setting 

synthetic polymer adhesive in water 

dispersion with very low emission level 

of volatile organic compounds (VOC) for 

bonding textile flooring and linoleum. 

Glicovil 

Multi-purpose powder adhesive for all 

types of wall coverings with a paper 

backing. 

Glicovil Marker 

Multi-purpose powder adhesive for 

heavy vinyl wall coverings with a paper 

or non-woven fabric backing. When 

applied on walls, it leaves a coloured 

trace to highlight the distribution of 

the adhesive which disappears after 

approximately 10 minutes. 

Glicovil Special 

Special powder adhesive for heavy 

vinyl wall coverings with a paper or 

non-woven fabric backing. 



Colour: light beige. 



Set to light foot traffic: after approximately 2-3 hours. 

Ready for use: at least 24 hours. 







Consistency: powder. 


Dilution ratio: 250 g of powder with 4-7 litres of water 

(according to use). 


Application: trowel, brush or roller. 


Packaging: 250 g. 




Dilution ratio: 250 g of powder with 6-8 litres of water 

(according to use). 








Dilution ratio: 250 g of powder with 5-10 litres 

of water (according to use). 





77

78 


Mapecryl Eco 


for vinyl and textile floors with very 


compounds (VOC). 

Rollcoll 

Multi-purpose adhesive in water 

dispersion for laying vinyl floors and 

walls and for bonding textile floors and 

walls with all types of backing. 

Ultrabond 

Aqua-Contact 

Solvent-free, double-buttering 

elastomeric adhesive in water 

dispersion for laying PVC and rubber 

profiles and PVC and rubber coverings 

which must stick on immediately. 

Ultrabond 

Aqua-Contact Cork 

Solvent-free, double-buttering 

elastomeric adhesive in water 



for laying natural cork floors and walls 

which need to stick immediately. 







Ready for use: approximately 24 hours. 


Storage: 12 months in its original packaging. 

Protect from frost. 







Waiting time: 

– applied by trowel: from 0 to 30 minutes; 

– applied by roller or spray: from 0 to 10 minutes. 

Open time: 

– applied by trowel: maximum 60 minutes; 

– applied by roller or spray: maximum 30 minutes. 


Ready for use: approximately 24 hours. 


Application: N° 1 or 2 trowel, roller or spray. 

Consumption: 

– by trowel: 0.3-0.4 kg/m²; 

– by roller: 0.20-0.40 kg/m²; 

– by spray: 0.25-0.3 kg/m². 






Set to light foot traffic: immediate. 

Ready for use: immediate. 


Application: N° 1 notched trowel, roller or brush. 












Application: notched and smooth trowel or brush. 

Consumption: from 0.15-0.25 kg/m² per coat and per 

surface. 



Adhesive in water dispersion with a 

quick, strong initial bond and very 


compounds (VOC), specially formulated 

for textile flooring. 


Solvent-free, quick-setting synthetic 

polymer adhesive in water dispersion 

with a very low emission level of volatile 

organic compounds (VOC) for bonding 

textile flooring and coverings. 


Rapid-setting adhesive in water 

dispersion for multi-layered cork floors 

and coatings. 


Solvent-free acrylic adhesive in water 



which forms a tough bond even after 

being left open for a long time, for 

laying rubber, PVC, vinyl, polyolephinic, 

linoleum and carpet flooring. 






Set to light foot traffic: approximately 3 hours. 

























Waiting time before putting into service: 




Application: N° 1 or 2 trowel. 






Waiting time: from 10 to 20 minutes (30-40 minutes 

on non-absorbent substrates). 









79

80 




strong and quick initial bond, long open 

time and very low emission level of 

volatile organic compounds (VOC), for 

vinyl floors. 



strong initial bond, long open time 

and very low emission level of volatile 

organic compounds (VOC) for vinyl 

floors. 


Adhesive in water dispersion with 

a strong initial bond and very low 


compounds (VOC), specially formulated 

for linoleum. 


Solvent-free synthetic polymer 



compounds (VOC) for bonding linoleum. 





Set to foot traffic: 3-4 hours. 

Waiting time before putting into service: 



Application: N° 1 or 2 trowel. 

























Consumption: consumption varies according to the 

flatness of the substrate, the type of backing on the 

flooring material and the type of trowel used, and 

ranges from 0.3 to 0.5 kg/m². 











Application: N° 3 notched trowel. 



Ultrabond Eco Fix 

Solvent-free adhesive in water 

dispersion which remains permanently 

tacky with very low emission level of 


self-laying flooring tiles. 

Ultrabond Eco Tack 

Adhesive with permanent tack in water 

dispersion with a very low emission of 

volatile organic compounds for selflaying 

textile squares. 

Ultrabond Eco V4 

Conductive 

Solvent-free, light-coloured acrylic 



compounds (VOC) for laying conductive 

vinyl, rubber and textile flooring. 

Ultrabond Eco V4 SP 

Multi-purpose, solvent-free acrylic 

adhesive in water dispersion with a long 

open time and very low emission level of 


laying rubber, PVC, vinyl, polyolephinic, 

linoleum and carpet flooring. 




Waiting time: 30 minutes - 12 hours. 

Set to light foot traffic: immediately after laying. 

Ready for use: immediately after laying. 



Application: N° 1 trowel or by roller. 






Waiting time: 30 minutes - 12 hours. 

Set to light foot traffic: immediately after laying. 

Ready for use: immediately after laying. 



Application: by roller. 





Colour: light grey. 




Ready for use: approx. 24-48 hours. 










Waiting time: approximately 10-20 minutes 

(30-40 minutes on non-absorbent surfaces). 









81

82 


Ultrabond Eco 

V4 SP Fiber 

NEW 

Multi-purpose, solvent-free, acrylic 

adhesive in water dispersion with 

extended open time and very low 


compounds (VOC) improved by adding 

fibres, particularly suitable for laying 

rubber and PVC flooring. 

Ultrabond Eco VS90 

Multi-purpose acrylic adhesive in water 



for vinyl and rubber floors. 

Ultrabond Super Grip 

Adhesive for mounting internal fixtures. 

9.2 Resin adhesives in alcohol _________________________________________________________________ 

Adesilex F57 

Synthetic resin adhesive in alcohol for 

bonding textile and linoleum flooring 

and coverings. 




Waiting time: approximately 10-20 minutes (30-40 

minutes on non-absorbent substrates). 



Ready for service: 72 hours. 

EMICODE: EC1 Plus - very low emission level. 

Storage: 12 months. Protect from freezing weather. 




















Final hardening time: 24-48 hours. 

EMICODE: EC1R Plus - very low emission. 



Consumption: 15 metres per 310 ml cartridge 

(φ 5 mm bead). 







Ready for use: approx. 24 hours. 



Consumption: 0.3-0.55 kg/m² (0.6 kg/m² for 

wheelchairs). 


9.3 Reactive adhesives ______________________________________________________________________ 

Adesilex G19 


one-buttering adhesive, for bonding 

resilient floors on internal and external 

absorbent and non-absorbent 

substrates. 

Also available in a rapid version. 

Adesilex G19 

Conductive 


one-buttering adhesive, for bonding 

resilient conductive flooring on 

both absorbent and non-absorbent 

substrates. 

Adesilex G20 

Two-component, low-viscosity 

epoxy-polyurethane one-buttering 

adhesive, for bonding resilient floors on 

internal and external absorbent 

and non-absorbent substrates. 

Also available in a rapid version. 

Adesilex UP71 

Two-component, low-viscosity 

polyurethane adhesive with no water or 

solvents for bonding PVC and rubber 

floors on Internal and external surfaces. 



comp. B: fluid liquid. 

Colour: comp. A: beige, red, green or black; 

comp. B: straw yellow. 





Ready for use: 3 days at +23°C. 








Colour: comp. A: black; comp. B: straw yellow. 















Colour: comp. A: beige, comp. B: transparent. 






Ready for use: 3 days at +23°C. 








Colour: 

– comp. A: grey; 

– comp. B: brown. 


Pot life of mix: approximately 30 minutes. 


Setting time: approximately 4 hours. 








83

84 


9.4 Adhesives for synthetic grass ______________________________________________________________ 

Ultrabond Turf PU 1K 

One-component, ready-to-use, 

polyurethane adhesive for bonding 

jointing strips between sheets of 

synthetic grass. 

Ultrabond Turf PU 2K 

Two-component polyurethane adhesive 

for bonding jointing strips between 

sheets of synthetic grass. 

Ultrabond Turf 

PU 2K Rapid 

Two-component, quick-setting solvent 

and water-free polyurethane adhesive 

for bonding synthetic grass surfaces. 

Ultrabond Turf 

Tape 100 

Jointing strip for fixing synthetic grass 

sheets in place and marking out lines 

for various sporting disciplines. 



Colour: green. 


Application temperature range: from 0°C to +35°C. 





Consumption: 0.30-0.35 kg per metre of 40 mm wide 

jointing strip (10 kg of adhesive for 22-25 metres of 

jointing strip). 

Packaging: 7 and 15 kg drums and 600 ml aluminium 

soft-cartridges. 




Colour: green and red. 









Consumption: 0.4-0.5 kg per metre of 40 mm wide 

jointing strip (10 kg of adhesive for 20-25 metres of 

jointing strip). 



Consistency: component A: thick paste; component 

B: fluid liquid. 

Colour: component A: green/red; comp B: brown. 









Application: n° 3 or n° 4 notched trowel. 

Consumption: 0.4-0.5 kg per metre of 40 mm-wide 

jointing strip (10 kg of product for 20-25 metres 

length). 



Thickness: 0.100 mm. 

Height of roll: 400 mm. 

Length of roll: 300 metres.

9.5 Polychloroprenic contact adhesives _________________________________________________________ 

Adesilex LP 

Polychloroprenic double-buttering 

adhesive in solvent for laying rubber 

floors and coverings. 

Adesilex VZ 

Double-buttering polychloroprenic 

adhesive in solvent for laying PVC floors 

and walls which must stick immediately 

and PVC base-boards and skirting 

boards. 

Mapecontact 

Reinforced adhesive strip for laying 

profiles, base-boards, covings and 

resilient and textile coatings on steps. 

Granirapid 


deformable, quick-setting and drying 

cementitious adhesive for ceramic tiles 

and stone material (thickness of adhesive 

up to 10 mm). 

Granirapid is CE marked, as declared in 

ITT certificates n° 85330201.101 (SFV) 

issued by the Säurefliesner-Vereinigung e.V. 

Grossburgwedel laboratory (Germany) and 

n° 25070279/Gi (TUM), n° 25080057/ 

Gi (TUM) and n° 25080060/Gi (TUM) 



certificates n° 2008-B-2749/17 and 

2008-B-2749/21 issued by the Istitute 

MPA Dresden (Germany). 




Waiting time: approximately 10-20 minutes. 



















9.6 Cementitious adhesives ___________________________________________________________________ 

EN 12004 

C2F S1 



EN 12004 


Colour: 

– adhesive: transparent; 

– reinforcement: orange. 

Weight per m²: 0.38 kg/m². 


to +35°C. 

Waiting time: none, bonds immediately. 

Set to foot traffic: immediate. 



Height of roll: 35, 65, 85 and 240 mm. 

Length of roll: 50 m. 

Packaging 

– 35 mm: boxes containing 8x50 m long rolls; 



– 240 mm: boxes containing 1x50 m long roll. 


Consistency: comp. A: powder; comp. B: thick liquid. 

Colours: comp. A: grey and white; comp. B: white. 


Mixing ratio: comp. A: 25 kg + comp. B: 5.5 kg. 







Colours available: grey and white. 





Packaging: GRANIRAPID white: 28 kg kit 

component A: 22.5 kg sack 

component B: 5.5 kg drum 

GRANIRAPID grey: 30.5 kg kit 

component A: 25 kg sack 

component B: 5.5 kg drum 

85

COMPLEMENTARY PRODUCTS FOR 

LAYING CERAMIC TILES, STONE 

MATERIAL, PARQUET, RESILIENT 

AND TEXTILE COVERINGS

88 

10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS 

10.1 Complementary products for laying ceramic tiles and stone material _______________________________ 

Fuga Fresca 

Acrylic resin paint in water dispersion to 

bring back the colour of tile joints 

in ceramic tiles. 

Keranet 

Acid-based cleaning solution for 

ceramic tiles. Particularly recommended 

for eliminating lime efflorescence and 

for the final cleaning step of Tuscany 

terracotta. In powder (concentrated) or 

liquid (15% in solution). 

Kerapoxy Cleaner 

Special cleaning solution for epoxy 

grout, suitable for cleaning operations 

after completing laying work and for 

removing traces and stains of epoxy 

grout (such as KERAPOXY, 

KERAPOXY P, KERAPOXY DESIGN and 

KERAPOXY CQ) from the surface of 

ceramic and glass coverings. 

Keraseal 

Protective, impregnating paint for 

porous tiles (Tuscany terracotta, etc.). 


Colour: available in 26 different colours. 

Application: by brush or bottle. 

Consumption: according to the size of the joint. 

Packaging: 1 kg tins and 160 g bottles. 


pH of liquid: 1.13. 

Waiting time before rinsing: 5 minutes, according 

to the consistency of the dirt; keep applying until 

stains have been completely removed. Rinse well after 

cleaning. 



Packaging: 

– concentrated powder: 4x5 and 18x1 kg packages; 

– liquid ready for use: 5, 10 and 25 kg canisters and 

12x1 kg packages; 

– 0.75 kg spray bottles. 


pH of liquid: 12 

Waiting time before rinsing: several minutes. In the 

case of larger residues, leave the solution to react for 

longer or repeat the cleaning operation. 


Application: by spray. 


Packaging: 

– 0.75 kg spray bottles; 

– 5 kg canisters. 


Consistency: highly fluid liquid. 



Application: rag dipped in the product. 



Packaging: 10 kg metal drums and 18x1 kg packages.

Mapequarz 

Dry quartz aggregates with no 

impurities used for making cementitious 

mortar for tile joints or for sprinkling on 

surfaces to clean grout. 

Mapetex System 

System for laying removable ceramic 

tiles and stone material. Also used for 

isolating and anti-fracture layers. 

Mapetherm Tile Fix 15 

Expansion plugs with 7 mm diameter 

zinc-plated steel screws for fastening 

up to 160 mm thick panels, supplied 

with a 10 mm diameter nylon plug and 

heat-stop washer. 

Mapelay 

PVC waterproofing and isolating sheet 

reinforced with glass fibres, for laying 

internal resilient and fabric floors on 

substrates which have cracks, which 

are particularly dirty or damp or which 

are subject to capillary-action rising 

damp. 


Use: added as an aggregate or for sprinkling on 

surfaces. 

Consumption: 

– as aggregate; mixing ratio of MAPEQUARZ: cement 

from 1:1 to 2:1; 

– for sprinkling; from 2 to 5 kg/m². 


– MAPETEX: 

width: 100 cm and 200 cm. 

– MAPETEX STRIP: 

width: 50 mm and 410 mm. 

Application: see Technical Data Sheet. 

Packaging: 

MAPETEX: 

2 m x 50 m rolls; 

1 m x 50 m rolls. 

MAPETEX STRIP: 

50 mm x 25 m rolls; 

410 mm by 10 m rolls; 

410 mm x 5 m rolls. 


Length of plug: 230 mm. 

Diameter of screw: 7 mm. 

Diameter of plug: 10 mm. 

Diameter of hole: 10 mm. 

Minimum depth of hole in reinforced cement and 

masonry: from 45 mm to 100 mm. 

Maximum thickness to be fastened: 160 mm. 

Packaging: boxes of 100 plugs. 

10.2 Complementary products for laying resilient and textile coverings _________________________________ 


Length: 25 m. 

Width: 2 m. 


Weight: 1.1 kg/m². 

Packaging: 25 m rolls. Weight of roll approx. 57 kg. 

89

90 


Mapelectric CP1 

Solvent-free conductive admix added 

to primers, smoothing compounds, 

adhesives and grouting mortars for 

laying ceramic floors. 

Primer G Conductive 

Dark-coloured, solvent-free conductive 

synthetic resin primer in water 

dispersion. 

Pulicol 2000 

Solvent gel for removing adhesive and 

paint. 

Cleaner H 

Damp wipes for cleaning hands. 


Consistency: fluid paste. 


Density: 1.05 kg/dm³. 

pH: no. 


Consumption: see Technical Data Sheet. 

Packaging: 2.5 kg drums. 





Drying time: minimum 2 hours. 







Consistency: gel. 




to +35°C. 

Removal time: 

– adhesives in water dispersion or in solution: 

5 minutes; 

– reactive adhesives: 60 minutes. 





10.3 Accessories, abrasive disks and products for the maintenance of parquet ___________________________ 


Packaging: plastic bottles with 80 damp wipes 

(20x30 cm).

Cleaner L 

Cleaning solution for pre-finished 

parquet. 

Ultrabond P-R9 

One-component, moisture curing, 

expansive polyurethane adhesive used 

by injection, for fastening and repairing 

parquet elements which are not 

perfectly bonded to the substrate. 

Ultracoat Clean Polish 

Special product, supplied ready-to-use 

in dilution, developed specifically for 

routine maintenance work on wooden 

floors in residential and commercial 

environments treated with water-based 

varnishes from the ULTRACOAT range. 

Ultracoat Clean WPM 

Ready-to-use product, supplied 

ready-to-use in dilution, developed 

specifically for routine maintenance 

work on wooden floors in residential 

and commercial environments treated 

with matt and extra-matt water-based 

varnishes from the ULTRACOAT range. 






Drying time: 24 hours. 


Application: cotton rag. 


Packaging: 1 litre bottles (0.85 kg) in boxes of 

12 bottles. 






to +35°C. 

Sanding: 24 hours. 



Application: by extrusion from the nozzle on the 

canister. 

Consumption: 1-2 ml for each hole to be injected. 

Packaging: 0.5 kg canisters. 


Dilution: 

– routine maintenance: 100 ml - 10 l of water; 

– floors with high volume of traffic: neat. 

Application: special microfiber applicator or cotton 

cloth. 

Drying time: approx. 20-30 minutes. 


Consumption: 80-100 m² of undiluted product. 

Packaging: 12 x 1 litre. 


Dilution ratio: 

– routine maintenance: 100 ml - 10 litres of water; 

– floors with high volume of traffic: neat. 

Application: cotton cloth or special microfiber 

applicator. 

Surface marks: undiluted product. 

Drying time: approx. 30 minutes at room temperature 

(+20°C), according to the type of substrate and 

amount applied. 

Storage: 24 months in its original packaging at +20°C. 

Consumption: 

– 80-100 m² per litre of diluted product. 

– Approx. 20 m² for undiluted product. 

Packaging: 12 x 1 litre. 

91

92 


Ultracoat Pad 

Pads used for polishing and cleaning 

parquet floors. 

Packaging: boxes of 5 pads. 

Ultracoat Polish 

Remover 

Concentrated de-waxing solution, 

developed specifically for removing 

ULTRACOAT CLEAN POLISH / 

ULTRACOAT CLEAN WPM from 

finished wooden floors. It may also be 

used to remove small marks from the 

surface of floors treated with varnishes 

from the ULTRACOAT range. 

Ultracoat Roller Combi 

Special grip for ULTRACOAT ROLLER. 

Ultracoat Roller Finish 

Medium-haired roller (4 mm) 

recommended for applying 

ULTRACOAT ULTRACOAT EASY 

PLUS and ULTRACOAT HIGH TRAFFIC 

(second and successive coats). 


Dilution rate: in 10 litres of hot water (+25°C): 

75 to 250 ml. 

Application: cotton cloth or special microfiber 

applicator. 

Consumption: approx. 80-100 m² per litre. 

Routing cleaning: 75 ml in 10 litres of water at +25°C. 

Deep-down cleaning: 250 ml in 10 litres of water 

at +25°C. 


Packaging: 12 x 1 litre.

Ultracoat Roller Oil 

Short-haired roller (2.5 mm) 

recommended for applying ULTRACOAT 

OIL. 

The special structure of the roller helps 

to quickly spread the product without 

leaving excess product on the surface 

so application is quicker and 

consumption is reduced. 

Ultracoat Roller Plus 

Long-haired roller (6 mm) recommended 

for applying undercoats of ULTRACOAT 

PREMIUM BASE. Thanks to its special 

composition and length of the fibres, 

the roller helps to impregnate floors 

perfectly. 

ULTRACOAT ROLLER PLUS may 

also be used to spread the first 

coats of ULTRACOAT EASY PLUS and 

ULTRACOAT HIGH TRAFFIC directly 

(without undercoat). 

Ultracoat Roller Quick 

Air-tight container for storing 

ULTRACOAT ROLLER after being 

used and then cleaned. 

Packaging: boxes of 20 pieces. 

Ultracoat SR 

Abrasive mesh disks in silica carbide 

for sanding parquet floors. 

93

94 


Ultracoat Steel Spatula 

Special spatula recommended for spreading 

ULTRACOAT AQUA PLUS, ULTRACOAT LS 

and ULTRACOAT OIL. Made entirely 

from stainless steel, when used to apply 

ULTRACOAT AQUA PLUS it avoids staining 

the pavement due to discolouring of the 

high quantity of tannin in certain types of 

wood. Adjustable flexibility to make grouting 

operations easier and to guarantee correct 

filling of even larger joints. Its special 

shape with rounded corners helps to avoid 

the formation of streaks of material on 

the surface of the floor, which makes it 

particularly recommended for spreading 

on ULTRACOAT OIL and ULTRACOAT 

PREMIUM BASE. 

Ultracoat Universal 

Cleaner 

Is a concentrated detergent developed 

for cleaning varnished and oiled 

wooden floors. Also suitable for routine 

floor cleaning operations and for 

particularly dirty floors. 


Dilution ratio: 1/2-2 dl in 10 litres of water. 

Application: wrung cloth or floor cleaning machine. 

Packaging: 12 x 1 litre.

PRODUCTS FOR RESIN 

AND CEMENTITIOUS FLOORS

98 

11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS 

11.1 Resin based products____________________________________________________________________ 

Mapecoat DW 25 

Two-component epoxy paint for 

anti-acid and non-toxic coatings on 

concrete surfaces, suitable for contact 

with drinking water. 

Mapecoat I 24 


anti-acid coatings on concrete surfaces. 


Two-component transparent epoxy 



Lucido 

Two-component, shiny, transparent 

epoxy primer in water dispersion. 

EN 1504-2 



PRINCIPLES 

PI-MC-PR-RC-IR 




Consistency: component A thick paste, 

component B fluid paste. 

Colour: component A white, component B 

transparent. 

Density (EN ISO 2811-1) (g/cm³): component A 1.43, 

component B 1.003. 

Dilution rate: supplied ready to use. 

Waiting time between each coat: 6-24 hours. 

Complete hardening time: 3 days. 


Cleaning: ethanol. 



Consumption (kg/m²): 0.4-0.6 (per coat). 




Colour of mix: white, grey (Ral 7001) and neutral. 



Setting time of film: 4-5 hours. 


6-24 hours. 



Application: brush, roller or airless spray. 








Dust dry at +23°C and 50% R.H.: 3-4 hours (first 

coat); 6-8 hours (second coat). 





Consumption: 300-500 g/m² according to the 

absorption. 






Workability time: 2-3 h. 

Dust dry at +23°C - 50% R.H.: 

– 3-4 h (first coat); 

– 6-8 h (second coat). 





Consumption: 300-500 g/m² according to absorption. 

Packaging: 5.9 kg kits (A + B).


Two-component, shiny epoxy finish 

in water dispersion for anti-dust and 

anti-grease treatments on concrete 

floors, cementitious substrates and as a 

finishing coat on epoxy systems. 

Mapecolor Paste 

System for colouring MAPEFLOOR 

I 300 SL, MAPEFLOOR I 350 SL, 

MAPEFLOOR I 500 W, 

MAPEFLOOR PU 400, 

MAPEFLOOR PU 410, PRIMER SN and 

MAPEFLOOR DECOR 700. 

N.B.: other RAL colours available upon 

request (minimum quantity 25 kg). 

Mapecrete Creme 

Protection 

Solvent-free, silane-based, thixotropic 

water repellent in watery dispersion, 

ideal for hydrophobic treatments on 

concrete. 

Mapecrete LI Hardener 

Surface treatment in liquid form made 

from lithium silicate with a consolidating 

effect, for new or old concrete floors 

and concrete with a surface dusting 

finishing treatment. 


Mixing ratio: comp. A: comp. B = 50:100. 




to +30°C. 


Dusty dry: 3 hours. 

Setting time: 8-9 hours. 




Application: short-haired or medium-haired roller or 

airless spray system. 

Consumption: 0.100-0.250 kg/m² per coat according 

to the absorption of the substrate. 



Appearance: paste. 

Colour: 19 different RAL colours. 

Dry substances content: 99 ± 1. 


to +30°C. 


Application: mixed with epoxy products during 

preparation. 

Consumption: 0.7 kg per kit (A+B) of PRIMER SN, 

MAPEFLOOR I 300 SL and MAPEFLOOR I 500 W. 

Packaging: 0.7 kg buckets. 


Colour: yellowish white. 

Appearance: creamy. 



Flash point (ISO 3679): +64°C. 


Application: squeegee, (airless) spray system, brush 

or roller. 

Consumption: 0.1-0.4 kg/m² according to the level 

of absorption of the concrete. 




Minimum waiting time for the product to penetrate: 

30 min. 

Loss of material with Taber abrasion test 

ISO 5940 (mg): 35. 

Capillary absorption EN 13057 (kg/m²∙h 0.5 ): 1.3. 


Application: by spray with a low pressure pump. 


of porosity of the concrete. 

Packaging: 25 kg canisters. 

99

100 


Mapecrete Stain 

Protection 

Hydro-oil repellent and anti-stain 

treatment for concrete, natural stone 

and cementitious surfaces made from 

modified organic polymers in a watery 

solution. 

Mapefloor Binder 930 

One-component, aliphatic polyurethane 

binder for decorative open-pore floors 

made from natural open-pore inert 

materials. 

Mapefloor CPU/HD 

Three-component, high-strength 

polyurethane-cement mortar with high 

resistance to chemicals for industrial 

floors, applied in thicknesses 6 to 9 mm. 

Mapefloor CPU/MF 

Three-component, self-levelling 

polyurethane-cement mortar with high 

resistance to chemicals for industrial 

floors, applied in thicknesses 3 to 4 mm. 



to +30°C. 

Absorption by immersion in oil (%): 0.32. 

Capillary absorption EN 13057 (kg/m²∙h 0.5 ): 0.25. 


Application: by spray, airless spray or brush. 


of porosity of the concrete. 

Packaging: 25 kg canisters. 


Colour of mix: transparent. 



Complete Set to light foot traffic time: 48 hours. 


Binder/inert consumption: 1:20. 

Compressive strength after 7 days at +23°C 

(EN 196-1): 12.47 N/mm². 

Flexural strength after 7 days at +23°C 

(EN 196-1): 5.19 N/mm². 


Application: rake, straight-edge, smooth trowel and 

mechanical vibro-compactor. 

Consumption: 1.0 kg/m² per cm of thickness. 



Mixing ratio: A/B/C = 3.2/3.2/25. 

Colour of mix: grey, beige, ochre and red. 

Consistency of mix: thick. 

Pot life of mix at +20°C: 25 minutes. 



8 hours. 


Compressive strength: 65 N/mm². 

Flexural strength: 16 N/mm². 




Packaging: 31.4 kg kits (A+B+C). 



Colour of mix: grey, beige, ochre, red and green. 

Consistency of mix: thick fluid. 




24 hours. 


Compressive strength: 60 N/mm². 

Flexural strength: 21 N/mm². 


Application: smooth trowel or rake with spacers. 

Consumption: 6 kg/m² for self-levelling coats (3 mm 

thick). 

Packaging: 28.4 kg kits (A + B + C).

Mapefloor Decor 700 

Two-component, solvent-free epoxy 

paste in water dispersion to create 

floors with a trowel-effect or mottled 

finish. 

May be coloured with 

MAPECOLOR PASTE. 

Mapefloor EP19 

Three-component acid and wearresistant 

epoxy mortar for floors. 

Mapefloor Finish 50 

Two-component, moisture curing, 

aliphatic transparent polyurethane 

finishing product. 


Two-component aliphatic polyurethane 

finishing product containing special 

fillers to give an opaque finish. 

SR 

SYNTHETIC 

RESINS 

B2,0 

AR0,5-IR20-Bfl-s1 

EN 13813 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 





Colour of mix: cream. 

Consistency of mix: paste. 

Dust dry at +23°C and 50% R.H.: 2 hours. 


12 hours. 


Compressive strength after 7 days: (DIN EN 196): 

70 N/mm². 

Flexural strength after 7 days: (DIN 1048): 30 N/mm². 

Modulus of elasticity (DIN 1048): 15000 N/mm². 

Taber abrasion resistance after 7 days (CS17 disk - 

1000 g - 1000 revs): 50 mg. 



Consumption: from 1 to 1.5 kg/m² per coat according 

to the characteristics of the substrate and type of 

decorative finish required. 




Consistency of mix: damp sand. 


Workability time: from 30 to 40 minutes. 



Resistance to temperatures: from -20°C to +120°C. 

Resistance to ageing: excellent. 

Resistance to oils: excellent. 

Resistance to acids and alkalis: excellent. 

Compressive strength after 7 days: (EN 196/1): 

50 N/mm². 

Flexural strength after 7 days: (EN 196/1): 20 N/mm². 

Taber abrasion resistance after 7 days (H22 disk - 

1000 g - 1000 revs): 1.1 g. 


Application: trowel and smooth metal trowel. 

Consumption: 20 kg/m² per cm of thickness; 

Packaging: 10 kg kits. 


Mixing ratio: comp. A : comp. B = 100 : 3.33. 



Bucholz hardness (after 7 days at +23°C): 90. 

Dust dry (at +23°C and 50% R.H.): 6 hours. 

Set to light foot traffic (at +23°C and 50% R.H.): 24 

hours. 


Taber Test (after 7 days at +23°C and 50% R.H., 

CS17 disk, 1000 cycles, 1000 g): 20 mg. 


Application: short-haired roller, such as mohair. 

Consumption: 0.1-0.2 kg/m² per coat according to 

absorption. 









Ready for contact with aggressive chemicals at 

+20°C and 60% R.H.: approx. 5 days. 

Minimum waiting time before coating at +20°C: 

> 24 hours. 

Maximum waiting time before coating at +20°C: 

< 48 hours. 

Taber Test (after 7 days at +23°C, CS17 disk, 

1000 cycles, 1000 g): 35 mg. 


Application: short-haired roller such as mohair, by 

spray or airless spray system. 



101

102 


Mapefloor Finish 52 W 

Two-component, polyurethane finishing 

product in water dispersion with low 

yellowing properties, for anti-dust and 

anti-oil treatments. 

Mapefloor Finish 

53 W/L 

Two-component, aliphatic, transparent, 

shiny polyurethane finish in water 

dispersion with no NMP for protecting 

resin systems. 

Mapefloor Finish 

54 W/S 

Two-component, aliphatic, transparent, 

matt polyurethane finish in water 

dispersion with no NMP for protecting 

resin systems. 


Two-component, aliphatic, highlyflexible 

polyurethane finish resistant to 

wear and UV rays. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 13813 

EN 13813 






Dust dry (at +23°C and 50% R.H.): 20-35 minutes. 

Set to light foot traffic (at +23°C and 50% R.H.): 

12 hours. 


Taber Test (after 7 days, CS17 disk, 1000 cycles, 

1000 g): 50 mg. 

Bucholz hardness (after 7 days): 71. 


Application: short-haired roller such as mohair, by 

spray or airless spray system. 

Consumption: 0.1-0.2 kg/m² per coat according to 

the absorption of the substrate. 







Varnishing: from 3 to 5 hours. 


Set to the touch: 40 minutes. 

Dust dry at +23°C and 50% R.H.: 40 minutes. 

Set to light foot traffic at +23°C and 50% R.H.: 6-7 hours. 

Final hardening time: 12 hours at +23°C. 

Gloss: 80. 


1000 g): 22 mg. 


Application: short-haired roller such as mohair or airless 

spray system. 

Consumption: 0.1-0.2 kg/m² according to the grade of 

finish required for the coating material. 

Packaging: 11 litre units. 






Varnishing: from 3 to 5 hours. 


Set to the touch: 40 minutes. 

Dust dry at +23°C and 50% R.H.: 40 minutes. 

Set to light foot traffic at +23°C and 50% R.H.: 6-7 hours. 

Final hardening time: 12 hours at +23°C. 

Gloss: 50. 


1000 g): 22 mg. 


Application: short-haired roller such as mohair or airless 

spray system. 


finish required for the coating material. 

Packaging: 11 litre units. 


Mixing ratio: comp A : comp B = 5.1 : 4. 

Colour of mix: Ral 7032 - Ral 1015 - Ral 7046. 

Consistency of mix: fluid paste. 


Viscosity of mix (mPa·s): 1,200 ± 200. 

Pot life at +23°C: 1 h. 

Dust dry at +23°C: 7-8 h. 


Set to foot traffic at +23°C: 24 h. 

Final hardening time at +23°C: 3 days. 

Maximum deformation after 7 days at +23°C 

+ 14 days at +50°C (%): 120. 

Tear strength after 7 days at +23°C + 14 days 

at +50°C (N/mm): 21.5. 

Taber abrasion resistance (CS 10 disk - 1,000 g - 

1,000 revs) after 7 days at +23°C (mg): 35 ± 5. 


Application: roller or airless spray system. 

Theoretical consumption: 0.15-0.35 kg/m². 

Packaging: 9.1 kg kits (A+B).


Two-component, protective acrylic 

filming agent in water dispersion for 

concrete, ULTRATOP and ULTRATOP 

LIVING floors. 

Mapefloor I 300 SL 

Two-component, multi-purpose, 

neutral-coloured epoxy formulate for 

industrial floor coatings up to 4 mm 

thick. 



Mapefloor I 300 SL TRP 

Two-component, transparent, nonyellowing 

epoxy coatings applied at a 

thickness of 1 mm for finishing coats on 

epoxy resin systems. 


CONCEPT 

Self-levelling epoxy coating with a 

coloured granular finish for abrasionresistant 

floors. 

SR 

SYNTHETIC 

RESINS 

B2,0 


EN 13813 

SR 

SYNTHETIC 

RESINS 

B2,0 

AR0,5-IR20-Cfl-s1 

EN 13813 


Mixing ratio: comp. A: comp. B: = 10 : 0.15. 

Colour of mix: transparent, milky. 


Dry substances content (3 h - 105°C) (%): 23. 



Workability time: 60 min. 

Surface temperature: from +12°C to +30°C. 


Dust dry at +23°C and 50% R.H.: 2 h. 

Abrasion resistance (Taber abrasimeter) (CS 17 disk - 

500 revs - 1,000 g) after 7 days (mg): 65. 

Set to light foot traffic at +23°C and 50% R.H.: 24 h. 



Application: short-haired roller such as mohair or a 

suitable airless spray system. 


porosity and absorption of the substrate. 







Set to light foot traffic at +23°C and 50% R.H.: 24 hours. 


Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 

1000 cycles, 1000 g at +23°C - 50% R.H.: 70 mg. 


Application: by roller or flat or notched trowel. 

Consumption: 

– 2.0 kg/m² for 2 mm thick self-levelling coatings on 

substrates primed with PRIMER SN; 

– 0.9 kg/m² for intermediate layers in 3 mm thick non-slip 

coatings on substrates primed with PRIMER SN; 

– 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick nonslip 

coatings on substrates primed with PRIMER SN. 






Pot life of mix: approx. 30 minutes. 

Dust dry at +23°C and 50% R.H.: 6 hours. 



Compressive strength (ASTM D 695): 55 N/mm². 

Flexural strength (ISO 178): 25 N/mm². 

Surface hardness (shore D): 80. 

Taber Test CS17 disk, 1000 cycles, 1000 g (DIN 52108): 

80 mg. 



Consumption: 1-1.5 kg/m². 




Colour of mix: light grey, dark grey, light blue, dark 

blue and red. 


Compressive strength after 7 days at +23°C 

(DIN EN 196-1): 52 N/mm². 

Flexural strength after 7 days at +23°C 

(DIN EN 196-1): 31 N/mm². 

Surface hardness (shore D): 75. 


1000 g): 80 mg. 



Consumption: 3 kg/m². 


103

104 



Two-component, multi-purpose, 

neutral-coloured epoxy formulate, with 

“class 1” and Euro-class “Bfl - s1” fire 

resistance for industrial floor coatings 

up to 4 mm thick. 



Mapefloor I 500 W 

Two-component, vapour-permeable, 

neutral-coloured epoxy formulate in 

water dispersion for industrial floors. 



Mapefloor I 900 

Two-component epoxy binder used for 

preparing trowelled mortar with a damp 

earth consistency for industrial floors. 


Two-component epoxy binder for 

trowelled mortar or bonding promoter 

for resin coatings. 

SR 

SYNTHETIC 

RESINS 

B2,0 


EN 13813 

SR 

SYNTHETIC 

RESINS 

B2,0 


EN 13813 









Taber Test after 7 days, CS17 disk, 1000 cycles, 1000 g, 

at +23°C - 50% R.H.: 70 mg. 


Application: by roller or flat or notched trowel. 

Consumption: 

– for 2 mm thick self-levelling coatings on substrates primed 

with PRIMER SN: 2.0 kg/m²; 

– for intermediate layers in 3 mm thick, multi-layer, non-slip 

coatings on substrates primed with PRIMER SN: 0.9 kg/m²; 

– for finishing layers in 1 mm and 3 mm thick multi-layer, 

non-slip coatings on substrates primed with 

PRIMER SN: 0.6 kg/m². 










Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 

1000 cycles, 1000 g at +23°C - 50% R.H.: 110 mg. 


Application: notched or smooth trowel or notched rake. 

Consumption: 

– for 2 mm thick smooth self-levelling coatings on substrates primed 

with MAPECOAT I 600 W: 4 kg/m²; 

– for 5 mm thick, multi-layered non-slip systems: 

as first layer: 

MAPEFLOOR I 500 W 2-2.5 kg/m²; 

QUARTZ 0.5 5 kg/m²; 

as second layer: 

MAPEFLOOR I 500 W 2-2.5 kg/m²; 

QUARTZ 0.5 5 kg/m²; 

as finishing layer: 

MAPEFLOOR I 500 W 0.5-0.7 kg/m² 



Mixing ratio: comp. A: comp. B = 50 : 100. 

Colour of mix: transparent amber. 






Application: 

– as bonding promoter: roller or smooth trowel; 

– for mortar: rake and aluminium straight edge. 

Consumption: 

– as bonding promoter: 0.5-0.7 kg/m²; 

– for mortar: recommended ratio for mortar: 1 kg of 

MAPEFLOOR I 900 ( A+B ) per 8-13 kg of QUARTZ 1.9, 

consumption depends on the thickness to be applied. 




Colour of mix: transparent amber. 






Application: 

– for priming: roller or smooth trowel; 

– for mortar: rake and aluminium straight edge. 

Consumption: 

– for priming: 0.3-0.5 kg/m² according to the absorption 

of the substrate. 

– for mortar: according to the thickness to be applied. 

Packaging: 15 kg kits (A + B).


Two-component epoxy primer for 

waterproofing concrete bridges before 

applying bitumen systems. 

Mapefloor PU 400 

Two-component, self-levelling, neutralcoloured, 

highly flexible polyurethane 

binder with fillers. 

Mapefloor PU 410 

Two-component, self-levelling, neutralcoloured, 

flexible polyurethane binder 

with fillers. 

Primer ER Rustop 

Two-component epoxy primer for 

metal surfaces. 



Colour of mix: amber yellow. 


Density of the mix: 1080 kg/m³. 

Pot life at +23°C: approximately 30 minutes. 


Set to light foot traffic at +23°C: 12 hours. 


Pull-out after 7 days at +23°C - 50% R.H.: > 2.5 N/mm² 

(failure of concrete). 

Pull-out on damp surfaces after 7 days at +23°C - 

50% R.H.: 2.4 N/mm² (failure of concrete). 


Application: rubber trowel, roller or brush. 

Consumption: 300 g/m² (according to the absorption of 

the substrate). 

Packaging: 28 kg metal drums 

(comp. A : 21 kg - comp. B : 7 kg). 





Pot life at +23°C: 59 minutes. 

Dusty dry: 4-6 hours. 



Elongation (DIN 53504): approx. 470%. 

Shore A hardness after 28 days: 70. 



Consumption: from 1.5 to 2 kg/m² according to the 

condition of the substrate. 






Pot life at +20°C: 41 minutes. 

Dusty dry: 2-4 hours. 



Elongation (DIN 53504): approx. 180%. 

Shore A hardness after 28 days: 89. 


Application: smooth or notched trowel. 

Consumption: 

1. As an intermediate layer in the MAPEFLOOR PARKING SYSTEM: 

MAPEFLOOR PU 410 + MAPECOLOR PASTE: 1.0 kg/m² with 

QUARTZ 0.25: 0.3 kg/m²; sprinkling of quartz 0.1-0.5 mm: 4.0 kg/m². 

2. As a multi-layered, flexible, non-slip coating layer (1.5-3 mm): 

MAPEFLOOR PU 410 + MAPECOLOR PASTE: 0.9 kg/m² with 

QUARTZ 0.5: 0.27 kg/m²; sprinkling of quartz 0.1-0.5 mm on fresh 

product: 3.0 kg/m². 

3. As a flexible, self-levelling layer (2-3 mm): MAPEFLOOR PU 410 + 

MAPECOLOR PASTE + QUARTZ 0.25: 4.0 kg/m². 



Mixing ratio: comp. A : comp B = 100 : 30. 

Colour of mix: white. 

Consistency of mix: liquid. 





Surface temperature: at least +10°C. 

Pot life: 6 h at +20°C. 


Dusty dry: after 2 h at +20°C. 

Final hardening time: 24 h. 


Application: by brush, roller or airless spray system. 



105

106 


Primer SN 

Two-component epoxy primer with 

fillers. 

May be coloured with MAPECOLOR 

PASTE. 




Consistency of the mix: dense fluid. 

Density of mix (kg/m³): 1500. 

Viscosity of the mix (mPa·s): 1,200. 

Pot life: 30 min. 




12 hours. 

Final setting time: 7 days. 

Application: flat American trowel or smooth trowel. 

Consumption: 0.3-0.6 kg/m² per coat, depending on 

the absorbency and characteristics of the substrate. 

Packaging: 20 kg units: 

– component A = 16 kg; 

– component B = 4 kg. 

11.2 Cementitious based products _____________________________________________________________ 

Dynastone Color 

Coloured cementitious aggregates for 

decorating cementitious floors and 

urban architectural features. 

Matetop N AR6 

Pre-blended, ready-to-use industrial 

hardener for concrete floors made from 

special quartz in a granulometric curve, 

Portland cement and special additives. 

Ultratop 

Self-levelling, ultra-quick hardening 

mortar with special hydraulic binders, 

applied at a thickness between 

5 and 40 mm to create abrasionresistant 

floors. 

CEMENTITIOUS 

SCREED 

C40-F10 

A9-A2 fl-s1 

EN 13813 


Appearance: rounded coloured granules in assorted 

sizes from 4 to 15 mm. 

Colour: white, yellow, orange, red, brown, green and 

blue. 

Density of granules according to 

UNI EN 1097-6:2002: 2.34 g/cm³. 

Water absorption according to UNI EN 1097-6:2002: 

4.5. 

Wear resistance according to UNI EN 1097-1 2004 

(Micro Deval): 13. 

Compressive strength according to 

UNI EN 1015-11:2001: >100 N/mm². 


Application: loose or mixed with ULTRATOP. 

Consumption: mixed with ULTRATOP: 10 kg/m² per 

cm of thickness. 



Colour of mix: light grey, anthracite, green, tobacco. 


pH of mix: >12.5. 


Compressive strength EN 13892/2 (N/mm²): 40 (after 1 day); 

70 (after 28 days). 

Flexural strength EN 13892/2 (N/mm²): 7 (after 1 day) 9 

(after 28 days). 

Bond strength on concrete (substrate in MC 0.40 - 

water/cement ratio = 0.40) according to EN 1766 (N/mm²): 

≥ 2 (after 28 days). 

Impermeability to water - penetration depth - 

EN 12390/8 (mm): < 5. 

Coefficient of capillary absorption EN 1062/3 (kg/m²·h 0.5 ): < 0.1. 

Böhme abrasion resistance EN 13892/3: Class 6. 

Reaction to fire EN 13501: Euroclass A1. 


Application: by dusting. 

Consumption: 

– manual application: from 1.5 to 2.5 kg/m² per coat; 

– mechanical application: from 3 to 5 kg/m². 



Colour: white, beige, light grey, red, anthracite and 

standard. 

Mixing ratio: 12-22 parts of water per 100 parts in weight 

of ULTRATOP. 

Applicable thickness: from 5 to 40 mm. 

Self-levelling: yes. 


Setting time: 60 minutes. 


Compressive strength after 28 days at +23°C: 

≥ 40 N/mm². 

Flexural strength after 28 days at +23°C: ≥ 11 N/mm². 

Böhme abrasion resistance after 28 days at +23°C: 

9 cm³/50 cm². 



Application: by hand or mortar pump. 



Ultratop Living 

Self-levelling, ultra-quick setting mortar 

with special hydraulic binders, applied 

at a thickness between 5 and 15 mm to 

create abrasion-resistant internal floors 

Ultratop Stucco 

Grout made from special hydraulic 

binders for sealing micro-porosity which 

forms after the first polishing phase of 

ULTRATOP. 

Additix PE 

Admixture to make epoxy and 

polyurethane products thicker with a 

thixotropic consistency. 

Epoxy Speed 

Solvent-free accelerator for epoxy 

primers. 


Colour: white, light grey, anthracite and natural. 

Mixing ratio: 19-21 parts of water per 100 parts in weight 

of ULTRATOP LIVING. 

Applicable thickness: from 5 to 15 mm. 

Self-levelling: yes. 


Setting time: 60-80 minutes. 


Compressive strength after 28 days at +23°C: 

≥ 32 N/mm². 

Flexural strength after 28 days at +23°C: 

≥ 9 N/mm². 

Böhme abrasion resistance after 28 days at +23°C: 

11 cm³/50 cm². 



Application: by hand or mortar pump. 




Colour: white, beige, light grey, red, anthracite and 

standard. 


Consumption: according to the micro-porosity. 


11.3 Complementary products for resin and cementitious floors ______________________________________ 

CEMENTITIOUS 

SCREED 

C30-F7 

A12-A2fl-s1 

EN 13813 


Appearance: powder. 


Density: 960 kg/m². 

Consumption: 2-5% by weight on the weight of the 

resin. 



Consumption: 2-3% of the total weight of the epoxy 

binder used (A+B). 


107

108 


Mapefloor Cleaner ED 

Detergent for normal degreasing 

operations of floors. 

Mapefloor Filler 

Calibrated fillers added to MAPEFLOOR 

FINISH 50, MAPEFLOOR FINISH 

51, MAPEFLOOR FINISH 52 W, 

MAPEFLOOR FINISH 53 W/L, 

MAPEFLOOR FINISH 54 W/S and 

MAPECOAT I 620 W to form a non-slip 

finish. 

Mapefloor 

Maintenance Kit 

A series of products for cleaning 

and periodic maintenance of floors 

to guarantee their performance 

characteristics and attractive finish. 

Mapefloor Wax 

Remover 

De-waxing, multi-action detergent 

for removing all types of metallic 

wax including the double-reticulation 

type, such as MAPELUX LUCIDA or 

MAPELUX OPACA. 


Appearance: opaque liquid. 

Colour: green. 

Solubility in water: soluble. 


Application: by hand or rendering machine: 






Storage: 12 months in their original, sealed packaging 

at a temperature of between +10°C and +30°C. 


Packaging: MAPEFLOOR KIT MANUTENZIONE is 

made up of the following products: 

– MAPELUX LUCIDA: 1x5 kg; 

– MAPEFLOOR WAX REMOVER: 1x5 kg; 

– MAPEFLOOR CLEANER ED: 2x5 kg. 


Appearance: liquid. 

Colour: pink. 

Solubility in water: soluble. 

Solubility in oil: insoluble. 

Storage: 12 months in its original sealed packaging.

Mapelux Lucida 

Double-reticulation, high-strength shiny 

metallic wax. 

Mapelux Opaca 

Double-reticulating, high-strength matte 

metallic wax. 

Quartz 0.25 

Quartz sand used as a “filler” and/or for 

“sprinkling” on epoxy systems. 

Quartz 0.5 




Appearance: emulsion. 

Colour: bluish-white. 


to +30°C. 

pH: 8.4 ± 0.2. 




Application: special wax spreader. 

Consumption: 50 g/m². 



Appearance: emulsion. 

Colour: bluish-white. 


to +30°C. 

pH: 8.4 ± 0.2. 




Application: special wax spreader. 

Consumption: 50 g/m². 




Maximum size of inerts: 0.25 mm. 




109

110 


Quartz 1.2 



Quartz 1.9 

Mixture of calibrated spherical quartz 

used as a filler in MAPEFLOOR I 900 

for preparing mortar with a damp earth 

consistency. 

Rete 320 

Glass fibre mesh for reinforcing epoxy 

systems. 







Consumption: recommended ratio for mortar: 

10-13 kg of QUARTZ 1.9 per kg of MAPEFLOOR I 900 

(A+B). 


Weight: 350 g/m². 

Mesh size: 15.7 x 10.1 mm.

111

PRODUCTS FOR REPAIRING ASPHALT 

AND HIGHWAY MAINTENANCE

114 

12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE 

Mape-Asphalt 

Repair 0/8 

One-component, ready-to-use reactive 

asphalt, applied cold, for repairing holes 

in roads. 

Mapegrout 

Hi-Flow TI 20 

Hi-flow, compensated-shrinkage, fibrereinforced, 

high-ductility cementitious 

mortar, used in combination with stiff 

steel fibres for repairing concrete. 

N.B.: MAPEGROUT HI-FLOW TI 20 is 

only on sale in combination with 

FIBRES R60 (4.5 kg of FIBRES R60 

every 4 bags of MAPEGROUT 

HI-FLOW TI 20). 

Fibres R60 

Rigid hooked fibres in zinc-plated steel, 

added to MAPEGROUT HI-FLOW TI 20 

to improve ductility. 

Mapegrout SV 

Quick-setting and hardening, 

compensated-shrinkage hi-flow mortar 

for repairing concrete and fixing drains, 

manholes and urban architectural 

fittings in place. 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 


Maximum size of aggregate: 8 mm. 

Minimum applicable thickness: 20 mm. 

Maximum applicable thickness: 70 mm. 

Step-on time: immediate. 


Final hardening time: approximately 1 hour (at +20°C). 


Application: trowel, spatula, rake or shovel. 

Consumption: approximately 23 kg/m² per centimetre 

of thickness. 

Packaging: 14 kg Alu-pack sacks. 


Maximum dimension of aggregate: 2.5 mm. 

Mixing ratio: 100 parts of MAPEGROUT 

HI-FLOW TI 20 with 14-16 parts of water, 4.5% of 

FIBRES R60 and 0.25% of MAPECURE SRA. 

Pot life of mix: approximately 1 hour (at 20°C). 

Minimum applicable thickness: 1 cm. 

Maximum applicable thickness: 5 cm per layer. 

Classification: EN 1504-3 - class R4 structural mortar. 


Application: pouring into formwork. 

Consumption: approximately 20 kg/m² per cm of 

thickness. 

Packaging: 

– MAPEGROUT HI-FLOW TI 20 25 kg vacuum-packed 

polyethylene bags. 

– FIBRES R60 4.5 kg boxes. 



Mixing ratio: 100 parts of MAPEGROUT SV with 

12-13 parts of water. 

Pot life of mix: 15 minutes (at +20°C). 





Colour: grey and black. 



Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout SV Fiber 

Hi-flow, compensated-shrinkage, 

quick—setting and hardening, highductility 

cementitious mortar applied 

at temperatures down to -5°C, used in 

combination with stiff steel fibres for 

repairing concrete. 

N.B.: MAPEGROUT SV FIBER is only on 

sale in combination with FIBRES R38 

(2.5 kg of FIBRES R38 every 100 kg of 

MAPEGROUT SV FIBER). 

Fibres R38 

Rigid hooked fibres in brass-plated 

steel, added to MAPEGROUT SV FIBER 


Mapegrout SV T 


compensated-shrinkage thixotropic 

mortar for repairing concrete and fixing 

drains, manholes and urban fittings in 

place. 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 



Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 

13.5-14.5 parts of water and 2.5% of FIBRES R38. 

Pot life of mix: approximately 20 minutes (at +20°C). 







thickness. 

Packaging: 

– MAPEGROUT SV FIBER 25 kg vacuum-packed 


– FIBRES R38 15 kg boxes (6x2.5 kg packets). 



Mixing ratio: 100 parts of MAPEGROUT SV T with 

12.5-13.5 parts of water. 







Application: gauging trowel or trowel. 


Packaging: 25 kg vacuum-packed polyethylene bags. 

115

PRODUCTS FOR THE RESTORATION 

OF MASONRY BUILDINGS

118 

13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS 

13.1 Consolidating masonry and render by injecting slurry _____________________________________________ 

Mape-Antique F21 

Super-fluid, salt-resistant, 

ECO-POZZOLAN-based, hydraulic binder 

with fillers applied by injection for 

consolidating masonry and render, 

including those with affrescoes. 

Mape-Antique I 

Superfluid, salt-resistant, ECO-POZZOLANbased, 

hydraulic binder with fillers 

applied by injection for consolidating 

masonry. 

Consolidante 8020 

Reversible consolidator in solvent for 

the conservative restoration of porous 

stone substrates, lime render and layers 

of paint. 


Maximum diameter of aggregate: 100 μm. 

Mixing ratio: 100 parts of MAPE-ANTIQUE F21 

with approx. 60 parts of water (10.2 l of water for each 

17 kg bag of product). 

Workability time of fresh mortar: approx. 

40 minutes. 

Fluidity of the mixture: < 30 sec. 

Sulphate resistance: high. 

Saline efflorescence: absent. 


Application: injection. 

Consumption: approx. 1.04 kg/dm³ (of cavities to be 

filled). 




Mixing ratio: 100 parts of MAPE-ANTIQUE I with 

35 parts of water (7 l of water for each 20 kg bag of 

product). 

Workability time of fresh mortar: 60 minutes. 

Fluidity of the mixture: < 30 sec. 

Sulphate resistance: high. 

Saline efflorescence: absent. 



Consumption: approx. 1.40 kg/dm³ (of cavities to 

be filled). 


13.2 Consolidating various types of weak and crumbly substrates (porous stone, brickwork, 

tuff, installation mortar, render, etc.) ___________________________________________________________ 

Primer 3296 

Consolidating and anti-dust acrylic 






Consumption: 0.1-1.0 kg/m² (according to the type 

of substrate and depth to be consolidated). 

Packaging: 10 kg metal drums. 





Consumption: 0.1-0.5 kg/m² (according to the 

absorption and porosity of the surface to be treated). 

Packaging: 5 and 10 kg canisters.

13.3 Horizontal chemical barriers against capillary rising damp _________________________________________ 

Mapestop 

Agent applied by injection made from 

micro-emulsion, concentrated silane 

and siloxane used to form a chemical 

barrier against capillary rising damp in 

masonry. 

13.4 De-humidifying masonry with binders and mortars for render ______________________________________ 

Mape-Antique CC 

Macro-porous, salt-resistant 

dehumidifying render made from lime 

and ECO-POZZOLAN for repairing old 

masonry, including on buildings of 

historical interest. 

Mape-Antique LC 

Salt-resistant, lime and ECO-POZZOLAN 

hydraulic binder mixed with aggregates 

in various grain sizes to make 

de-humidifying render and masonry 

mortar. 

Mape-Antique MC 

Macro-porous, salt-resistant 

dehumidifying render made from lime 

and ECO-POZZOLAN for repairing old 

masonry, including on buildings of 

historical interest. 

EN 998-1 



EN 998-1 

R-CS II 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS II 

RENDERING AND 



Dimension of particles: 20-60 nm. 

Mixing ratio: 100 parts of MAPESTOP with 


Silane/siloxane content: 100%. 

Duration of solution: 24 hours. 


Application: by gravity or suitable injection pump. 

Consumption: according to the absorption of the 

masonry. Approximately 8-9 kg/m of solution for 

a 40 cm thick wall, corresponding to 0.4-0.6 kg of 

MAPESTOP. 

Packaging: 

– 1 kg metal can with spout. 

– 180 kg drums. 


Maximum diameter of aggregate: 2.5 mm. 

Mixing ratio: 100 parts of MAPE-ANTIQUE CC with 


Porosity of the mix while still fresh: > 20%. 

Coefficient of permeability to water vapour: ≤ 10 μ. 

Workability time of fresh mortar approx. 1 hour. 


Maximum applicable thickness per layer: 30 mm. 

Classification: EN 998-1 - type R mortar, category 

CS II. 


Application: gauging trowel. 

Consumption: 15 kg/m² (per cm of thickness). 



Mixing ratio: 

– 0.5-2.5 mm sand: 500 kg/m³ of MAPE-ANTIQUE LC 

with 1,000 kg/m³ of sand and 225 l/m³ of water; 

– 0.5-5 mm gravel: 450 kg/m³ of MAPE-ANTIQUE LC 

with 1,150 kg/m³ of gravel and 210 l/m³ of water; 

– 0-8 mm gravel: 400 kg/m³ of MAPE-ANTIQUE LC 

with 1,300 kg/m³ of gravel and 200 l/m³ of water; 


Application: trowel or by pouring. 

Consumption: approximate (per cm of thickness): 

– 5.0 kg/m² with fine sand (0.5-2.5 mm); 

– 4.5 kg/m² with coarse sand (0.5-5 mm); 

– 4.0 kg/m² with gravel (0-8 mm). 




Mixing ratio: 100 parts of MAPE-ANTIQUE MC with 

14-16 parts of water (3.5-4 l of water for each 25 kg 

bag of product). 

Porosity of the mix while still fresh: > 20%. 


Workability time of fresh mortar approx. 60 minutes. 




CS II. 



Consumption: 15 kg/m² (per cm of thickness). 


119

120 


Mape-Antique Rinzaffo 

Salt-resistant, transpirant lime and 

ECO-POZZOLAN scratch-coat 

mortar applied as a base layer for 

de-humidifying, transpirant and 

“structural” render. 

PoroMap Intonaco 

Pre-blended, salt-resistant 

dehumidifying and insulating mortar 

for repairing damp stone, brick and tuff 

walls, applied by hand. 

PoroMap Intonaco 

Macchina 

Pre-blended, salt-resistant 

dehumidifying and insulating mortar 

for repairing damp stone, brick and 

tuff walls; applied using a rendering 

machine. 

PoroMap Rinzaffo 

Pre-blended, salt-resistant mortar 

applied by hand before applying 

POROMAP INTONACO dehumidifying 

and insulating mortar. 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS II 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS II 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 




Mixing ratio: 100 parts of MAPE-ANTIQUE RINZAFFO 

with 25-27.5 parts of water (5-5.5 l of water for each 

20 kg bag of product). 

Porosity of the mix while still fresh: 6%. 


Workability time of fresh mortar approx. 1 hour. 


Classification: EN 998-1 - type GP mortar, category 

CS IV. 


Application: continuous-mixing rendering machine 

or gauging trowel. 

Consumption: 7.5 kg/m² (for a 5 mm thick layer). 



Maximum diameter of aggregate: 1 mm. 

Mixing ratio: 100 parts of POROMAP INTONACO 

with 20-22 parts of water. 

Porosity of the mortar while still fresh: > 25%. 


Workability time of mortar approx. 60 minutes. 



CS II. 



Consumption: 10-11.5 kg/m² (per cm of thickness). 




Mixing ratio: 100 parts of POROMAP INTONACO 

MACCHINA with approx. 21 parts of water. 

Porosity of the mortar while still fresh: > 20%. 


Workability time of mortar: approx. 60 minutes. 



CS II. 


Application: continuous-mixing rendering machine. 

Consumption: 11.5-13 kg/m² (per cm of thickness). 




Mixing ratio: 100 parts of POROMAP RINZAFFO with 

17-18.6 parts of water. 

Coefficient of permeability to water vapour: < 20 μ. 

Workability time of mortar: approx. 60 minutes. 



CS IV. 



Consumption: 7.5-8 kg/m² (for a 5 mm thick layer). 


PoroMap Rinzaffo 

Macchina 

Pre-blended, salt-resistant mortar 

applied using a rendering machine 

before applying POROMAP INTONACO 

MACCHINA dehumidifying and 

insulating mortar. 

Mape-Antique 

Intonaco NHL 

Transpirant base render made 

from natural hydraulic lime and 

ECO-POZZOLAN, for application on 

existing masonry work, including 

those of historical interest, and on new 

constructions. 



Mixing ratio: 100 parts of POROMAP RINZAFFO 

MACCHINA with approx. 18 parts of water. 

Coefficient of permeability to water vapour: < 20 μ. 

Workability time of mortar approx. 60 minutes. 



CS IV. 


Application: continuous-mixing rendering machine. 

Consumption: 7.5-8 kg/m² (for a 5 mm thick layer). 


13.5 Lime based transpirant renders _______________________________________________________________ 



Mixing ratio: 100 parts of MAPE-ANTIQUE 

INTONACO NHL with 19-21 parts of water (4.75-5.25 l 

of water for each 25 kg bag of product). 

Porosity of the mortar while still fresh: 20%. 


Workability time of fresh mortar: approx. 60 minutes. 



Classification: EN 998-1 - type GP mortar, 

category CS II. 





Consumption: approx. 14.5 kg/m² (per cm of thickness). 


13.6 “Reinforced” renders, installation mortars and masonry _________________________________________ 

Mape-Antique 

Strutturale NHL 

High-performance transpirant mortar 

for render and masonry work made 


ECO-POZZOLAN, particularly suitable for 

making “reinforced” and installation 

mortar. 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS II 

RENDERING AND 





STRUTTURALE NHL with 16-17 parts of water 

(4-4.25 l of water for each 25 kg bag of product). 


Coefficient of permeability to water vapour: 60 μ. 




Classification: 

– EN 998-1 - type GP mortar, category CS IV; 

– EN 998-2 - type G mortar, class M 15. 




Consumption: approx. 17 kg/m² (per cm of thickness). 


13.7 Skimming of de-humidifying transpirant and structural mortars ___________________________________ 

Mape-Antique FC 

Civile 

(formerly Mape-Antique FC 

and Mape-Antique FC/R) 

Salt-resistant, fine-grained lime and 

ECO-POZZOLAN transpirant skimming 

mortar for a natural finish on render. 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-2 



EN 998-2 

G-M15 

MASONRY MORTAR 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 



Maximum size of aggregate: 400 μm. 

Mixing ratio: 100 parts of MAPE-ANTIQUE FC with 

24-26 parts of water (6-6.5 l of water for each 25 kg 

bag of product). 

Workability time of fresh mortar: approx. 60 min. 


Classification: EN 998-1 - GP type mortar, 

category CS IV. 



Colour: white or terracotta. 

Application: flat metal trowel. 

Consumption: approx. 1.4 kg/m² (per mm of 

thickness). 


121

122 



Grosso 

Salt-resistant, large-grained lime and 

ECO-POZZOLAN transpirant skimming 

mortar for a rough finish on render. 


Ultrafine 

Salt-resistant, ultra fine-grained lime 

and ECO-POZZOLAN transpirant skimming 

mortar for a smooth finish 

on render. 

PoroMap Finitura 

Cement-free, light-coloured fine 

mortar for finishing off de-humidifying 

renders applied on stone, brick and tuff 

masonry. 

Mape-Antique 

Allettamento 

Salt-resistant masonry mortar, made 


ECO-POZZOLAN, for installation layers and 

pointing on “natural finish” masonry. 


Maximum size of aggregate: 600 μm. 

Mixing ratio: 100 parts of MAPE-ANTIQUE FC 

GROSSO with 18-20 parts of water (4.5-5 l of water for 

each 25 kg bag of product). 








Consumption: approx. 1.4 kg/m² (per cm of 

thickness). 



Maximum size of aggregate: < 100 μm. 

Mixing ratio: 100 parts of MAPE-ANTIQUE FC 

ULTRAFINE with 30-32 parts of water (6-6.1 l of water 

for each 20 kg bag of product). 




category CS II. 




Consumption: approx. 1.3 kg/m² (per cm of 

thickness). 




Mixing ratio: 100 parts of POROMAP FINITURA with 


Workability time of mortar: 1 hour 30 minutes. 


Classification: EN 998-1 - type GP mortar, 



Application: smooth metal trowel. 

Consumption: 1.4 kg/m² (per mm of thickness). 


13.8 Brick, stone, tuff and mixed masonries _______________________________________________________ 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS II 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-2 



EN 998-2 

G-M5 



Maximum size of aggregate: 1.5 mm. 


ALLETTAMENTO with 18-20 parts of water (4.5-5 l of 

water for each 25 kg bag of product). 


Coefficient of permeability to water vapour: μ 15/35. 




Classification: EN 998-2 - G type mortar, class M 5. 



Consumption: 16.5 kg/m² (per cm of thickness). 

Packaging: 25 kg sacks.

Mape-Antique 

Strutturale NHL 

High-performance transpirant mortar 

for render and masonry work made 


ECO-POZZOLAN, particularly suitable for 

making “reinforced” and installation 

mortar. 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-2 



EN 998-2 

G-M15 





STRUTTURALE NHL with 16-17 parts of water 

(4-4.25 l of water for each 25 kg bag of product). 


Coefficient of permeability to water vapour: 60 μ. 






– EN 998-2 - type G mortar, class M 15. 




Consumption: approx. 17 kg/m² (per cm of thickness). 


123

RESTORATION OF 

WOODEN STRUCTURES

126 

14. RESTORATION OF WOODEN STRUCTURES 

Mapewood Gel 120 

Gel epoxy adhesive for restoring 

wooden structural elements. 

Mapewood Paste 140 

Thixotropic epoxy adhesive for restoring 

wooden structural elements. 

Mapewood Primer 100 

Fluid epoxy impregnator in water 

dispersion for consolidating and priming 

wooden structures. 




Setting time: 50’. 



Application: pouring or injection. 

Consumption: 1.01 kg/dm³ (of cavities to be filled). 

Packaging: 2.5 kg units (comp. A = 2 kg and 

comp. B = 0.5 kg). 



Workability time: 1 hour. 

Setting time: 4-5 hours. 



Application: metal trowel. 

Consumption: 1.59 kg/dm³ (of cavities to be filled). 

Packaging: 3 kg units (comp. A = 2 kg and 

comp. B = 1 kg). 




Final hardening time: 12-24 hours. 


Application: roller, brush or pipe cleaner. 

Consumption: approx. 150 g/m². 

Packaging: 1 kg units (comp. A = 0.5 kg and 

comp. B = 0.5 kg).

127

ADHESIVES AND SMOOTHING 

COMPOUNDS FOR CELLULAR 

CONCRETE BLOCKS

130 

15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS 

Porocol 

Cementitious adhesive mortar 

for expanded block masonry, fire 

resistance class REI 180. 

Porocol FF 

One-component, fine-grained, white 

cementitious mortar for laying cellularconcrete 

blocks and for smoothing over 

the surface in layers of up to 10mm 

thick. 

Fire resistance class according to 

EN 1364-1 EI 240 - E 120. 

EN 998-1 



EN 998-1 

GP-CS III 

RENDERING AND 


EN 998-2 



EN 998-2 

T-M5 


EN 998-1 



EN 998-1 

GP-CS III 

RENDERING AND 


EN 998-2 



EN 998-2 

T-M5 




Mixing ratio: 100 parts of POROCOL with 


Pot life of mix: approximately 2-3 hours. 


Maximum applicable thickness: 1.5 cm per layer. 


CS III. 

EN 998-2 - type T mortar, class M5. 


Application: notched or smooth trowel. 

Consumption: 

– as adhesive for flat block walls: 5-7 kg/m²; 

– as skimming layer for flat block walls: 1.4 kg/m² per 

mm of thickness. 




Mixing ratio: 100 parts of POROCOL FF with 


Pot life of mix: approximately 2-3 hours. 




CS III. 

EN 998-2 - type T mortar, class M5. 


Application: notched or smooth trowel. 

Consumption: 

– as adhesive for flat block walls: 2-4 kg/m²; 

– as skimming layer for flat block walls: 1.2 kg/m² per 



131

PRODUCTS FOR THE 

RESTORATION OF CONCRETE

134 

16. PRODUCTS FOR THE RESTORATION OF CONCRETE 

16.1 Protection of steel reinforcement rods __________________________________________________________ 

Mapefer 

Two-component, anti-corrosion 

cementitious mortar for steel 

reinforcement rods. 

Mapefer 1K 

One-component, anti-corrosion 

cementitious mortar for steel 

reinforcement rods. 

Mapeshield E 25 

Adhesive zinc plates applied directly on 

the surface of structures for galvanic 

cathodic protection against the 

corrosion of steel reinforcement rods. 

Mapeshield I 

Pure zinc anodes coated with a special 

conductive paste, for galvanic cathodic 

protection against corrosion of steel 

reinforcement in new structures and in 

structures requiring repair. 

EN 1504-7 



EN 1504-7 

REINFORCEMENT CORROSION 

PROTECTION 

EN 1504-7 



EN 1504-7 

REINFORCEMENT CORROSION 

PROTECTION 




Pot life of mix: approximately 1 hour. 


Waiting time between each coat: approximately 

2 hours. 

Waiting time before applying mortar: 6-24 hours. 

Classification: EN 1504-7. 


Application: brush in two coats. 

Consumption: 120 g/m for 8 mm diameter rebar 

(2 mm of product applied). 

Packaging: 2 kg kits: 

– 1.5 kg packet (comp. A); 

– 0.5 kg bottle (comp. B). 



Mixing ratio: 100 parts of MAPEFER 1K with 




Waiting time between each coat: approximately 

2 hours. 

Waiting time before applying mortar: 6-24 hours. 



Application: brush in two coats. 

Consumption: 100 g/m for 8 mm diameter rebar 

(2 mm of product applied). 

Packaging: boxes of 4x5 kg bags. 


Thickness of plate: 0.25 mm. 

Height: 25 cm. 

Weight: 3.15 kg/m² ± 5%. 


Application: external surfaces of concrete. 

Consumption: according to the density of steel 

reinforcement. 

Packaging: wooden boxes with 1 25 m x 25 cm 

wide rolls. 


Mapeshield I 10 10/10 10/20 

External surface: 100 x 50 mm ± 10% 100 x 50 mm ± 10% 

Height: 12 mm ± 10% 15 mm ± 10% 

Weight: 230 g ± 10% 320 g ± 10% 


Application: directly on steel reinforcement. 




Mapeshield I 30 30/10 30/20 

External surface: 300 x 50 mm ± 5% 300 x 50 mm ± 5% 

Height: 10 mm ± 10% 12 mm ± 10% 

Weight: 450 g ± 10% 570 g ± 10% 


Application: directly on steel reinforcement. 



Packaging: boxes of 12 pieces.

16.2 Repairs to concrete with compensated-shrinkage mortar and binders ________________________________ 

Gravel 0-8 

Aggregate with an assorted grain size 

for cementitious mortar, particularly 

suitable as a “filler” for STABILCEM. 

Gravel 0-15 

Aggregate with an assorted grain size 

for cementitious mortar, particularly 

suitable as a “filler” for STABILCEM. 

Gravel 3-5 

Aggregate with an assorted grain 

size mixed with repair mortar from 

the MAPEGROUT range. 

Gravel 6-10 

Aggregate with an assorted grain 

size mixed with repair mortar from 

the MAPEGROUT HI-FLOW and 

MAPEGROUT SV ranges or with 

expansive mortar, such as MAPEFILL. 


Size of aggregate: assorted grain size from 

0 to 8 mm. 

Application: added as an aggregate. 




0 to 15 mm. 





3 to 5 mm. 





6 to 10 mm. 



135

136 


Mapecure SRA 

Curing admixture for cementitious 

mortar and concrete to reduce hydraulic 

shrinkage and the formation of 

micro-cracks. 

Mapegrout 430 

Fine-grained, fibre-reinforced, normalsetting 

thixotropic mortar for repairing 

concrete. 

Mapegrout BM 

Two-component cementitious mortar 

with a low modulus of elasticity for 


Mapegrout Fast-Set 

Fibre-reinforced, quick setting and 

hardening, controlled-shrinkage mortar 

for repairing concrete. IN 

EN 1504-3 



EN 1504-3 

R3 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 

COMPLIANCE WITH 


EN 1504-3 

R3 

REPAIR MORTAR 




Consumption: 

– mortar: 0.25% in weight of pre-blended mix; 

– concrete and beton: 5-8 l/m³. 

Packaging: 0.25 kg bottles and 20 kg drums. 


Maximum dimension of aggregate: 1 mm. 

Mixing ratio: 100 parts of MAPEGROUT 430 with 


Pot life of mix: approximately 1 hour (at +20°C). 





Application: trowel, gauging trowel or rendering 

machine, including the continuous-mixing type. 





Mixing ratio: 100 parts of MAPEGROUT BM comp. A 

with 18.8 parts of MAPEGROUT BM comp. B. 





Storage: 12 months (comp. A); 24 months (comp. B). 

Application: trowel, gauging trowel or rendering machine. 


thickness. 

Packaging: 29.7 kg kits: 

– 25 kg vacuum-packed polyethylene bags (comp. A); 

– 4.7 kg drums (comp. B). 



Mixing ratio: 100 parts of MAPEGROUT FAST-SET 

with 15-16 parts of water. 



Maximum applicable thickness: 2-2.5 cm per layer. 



Application: trowel or gauging trowel. 



Mapegrout FMR 

Two-component, shrinkagecompensated, 

sulphate-resistant, 

thixotropic mortar reinforced with 

flexible, alloy metal fibres, particularly 

suitable for repairing concrete 

structures where higher ductility is 

required. 

N.B.: MAPEGROUT FMR is only on sale 

in combination with FIBRES FF (375 

g of FIBRES FF every 25 kg bags of 

MAPEGROUT FMR). 

Fibres FF 

Flexible, amorphous, iron-chrome 

stainless steel alloy fibres added to 

MAPEGROUT FMR to improve ductility. 

Mapegrout Hi-Flow 

Fibre-reinforced, controlled-shrinkage 

mortar for repairing concrete. 

Mapegrout Hi-Flow GF 

Hi-flow, shrinkage-compensated 

cementitious mortar reinforced with 

inorganic fibres, for repairing concrete 

structures where higher ductility is 

required. 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 



Mixing ratio: 100 parts of MAPEGROUT FMR with 

17-18 parts of water and 1.5% of FIBRES FF. 






Application: gauging trowel, trowel or rendering 

machine. 


Packaging: 

– MAPEGROUT FMR 25 kg vacuum-packed 


– FIBRES FF 18.75 boxes (50x375 g water-soluble 

packets). 



Mixing ratio: 100 parts of MAPEGROUT HI-FLOW 

with 13-14 parts of water and 0.25% of 

MAPECURE SRA. 








thickness. 




Mixing ratio: 100 parts of MAPEGROUT HI-FLOW GF 

with 14-16 parts of water and 0.25% of 

MAPECURE SRA. 








thickness. 


137

138 


Mapegrout 

Hi-Flow TI 20 

Hi-flow, compensated-shrinkage, fibrereinforced, 

high-ductility cementitious 

mortar, used in combination with stiff 

steel fibres for repairing concrete. 

N.B.: MAPEGROUT HI-FLOW TI 20 is 

only on sale in combination with 

FIBRES R60 (4.5 kg of FIBRES R60 

every 4 bags of MAPEGROUT 

HI-FLOW TI 20). 

Fibres R60 

Rigid hooked fibres in zinc-plated steel, 

added to MAPEGROUT HI-FLOW TI 20 


Mapegrout LM2K 

Two-component, thixotropic, fibrereinforced, 

cementitious mortar with 

a low modulus of elasticity and added 

organic corrosion inhibitor for repairing 

concrete, applied in a single layer at a 

thickness of 3 to 20 mm. 

Mapegrout SV 


compensated-shrinkage hi-flow mortar 

for repairing concrete and fixing drains, 

manholes and urban architectural 

fittings in place. 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R3 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 




HI-FLOW TI 20 with 14-16 parts of water, 4.5% of 

FIBRES R60 and 0.25% of MAPECURE SRA. 








thickness. 

Packaging: 

– MAPEGROUT HI-FLOW TI 20 25 kg vacuum-packed 


– FIBRES R60 4.5 kg boxes. 



Mixing ratio: 100 parts of MAPEGROUT LM2K comp. 

A with 21 parts of MAPEGROUT LM2K comp. B. 







machine. 


thickness. 

Packaging: 

30.25 kg kits: 





Mixing ratio: 100 parts of MAPEGROUT SV with 







Colour: grey and black. 




Mapegrout SV Fiber 

Hi-flow, compensated-shrinkage, 

quick—setting and hardening, highductility 

cementitious mortar applied 

at temperatures down to -5°C, used in 

combination with stiff steel fibres for 


N.B.: MAPEGROUT SV FIBER is only on 

sale in combination with FIBRES R38 

(2.5 kg of FIBRES R38 every 100 kg of 

MAPEGROUT SV FIBER). 

Fibres R38 

Rigid hooked fibres in brass-plated 

steel, added to MAPEGROUT SV FIBER 




compensated-shrinkage thixotropic 

mortar for repairing concrete and fixing 

drains, manholes and urban fittings in 

place. 

Mapegrout T40 

Medium-strength (40 MPa), 

fibre-reinforced thixotropic mortar 

for repairing concrete. IN 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 

COMPLIANCE WITH 


EN 1504-3 

R3 

REPAIR MORTAR 



Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 

13.5-14.5 parts of water and 2.5% of FIBRES R38. 








thickness. 

Packaging: 

– MAPEGROUT SV FIBER 25 kg vacuum-packed 


– FIBRES R38 15 kg boxes (6x2.5 kg packets). 



Mixing ratio: 100 parts of MAPEGROUT SV T with 













Mixing ratio: 100 parts of MAPEGROUT T40 with 








machine. 

Consumption: approximately 18.5 kg/m² per cm of 

thickness. 


139

140 


Mapegrout T60 

Fibre-reinforced, sulphate-resistant 

thixotropic mortar for repairing 

concrete. 

Mapegrout Thixotropic 

Fibre-reinforced, controlled-shrinkage 

mortar for repairing concrete. 

Planitop 400 

Quick-setting, controlled-shrinkage 

thixotropic mortar for repairing the 

surface of concrete, may be applied in 

various thicknesses from 1 to 40 mm in 

a single layer. 

Planitop Smooth & 

Repair 

Quick-setting, fibre-reinforced, 

controlled-shrinkage cementitious 

mortar for repairing and smoothing 

concrete, may be applied in various 

thicknesses from 3 mm to 40 mm in 

a single layer. 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R4 

REPAIR MORTAR 

EN 1504-3 



EN 1504-3 

R3 

REPAIR MORTAR 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 1504-3 



EN 1504-3 

R2 

REPAIR MORTAR 



Mixing ratio: 100 parts of MAPEGROUT T60 with 

16.5-17.5 parts of water and 0.25% of MAPECURE 

SRA. 



Maximum applicable thickness: 4 cm per layer on 

vertical surfaces and 2 cm per layer on ceilings. 




machine. 






TISSOTROPICO with 15.5-16.5 parts of water. 







machine. 





Mixing ratio: 100 parts of PLANITOP 400 with 









Packaging: 25 kg bags; 20 kg boxes (4x5 kg packets). 



Mixing ratio: 100 parts of PLANITOP SMOOTH & 

REPAIR with 19-21 parts of water. 

Pot life of mix: approximately 20 minutes (at 20°C). 




– EN 1504-3 - class R2 non-structural mortar. 

– EN 1504-2 - coating (C) principles MC and IR. 




thickness. 

Packaging: 25 kg vacuum-packed polyethylene bags 

and 20 kg boxes (4x5 kg packets)

Stabilcem 

Expansive, super-fluid cementitious 

binder for mixing injection slurry, mortar 

and concrete. 


Mixing ratio: - injection slurry: 100 parts of 

STABILCEM with 30-32 parts of water; 

- mortar, beton and concrete: according to the 

consistency and performance required from the 

aggregate. 


Application: injection and pouring into formwork. 

Consumption: 

– injection slurry: 1.6 kg/dm³ of cavities to be filled; 

– mortar and beton: 350-550 kg/m³; 

– concrete: 300-400 kg/m³. 


141

SMOOTHING PRODUCTS FOR 

CONCRETE AND RENDER SURFACES

144 

17. SMOOTHING PRODUCTS FOR CONCRETE AND RENDER SURFACES 

17.1 Concrete __________________________________________________________________________________ 

Mapefinish 

Two-component cementitious mortar 

for finishing off concrete. 

Monofinish 

One-component, normal-setting 

cementitious mortar for smoothing 

concrete and cementitious render. 

Nivoplan 

Smoothing mortar for indoor and 

outdoor walls and ceilings. 

Planitop 100 

Quick-setting, light-grey coloured fine 

mortar for repairing and smoothing 

concrete and render. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 1504-3 



EN 1504-3 

R2 

REPAIR MORTAR 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 1504-3 



EN 1504-3 

R2 

REPAIR MORTAR 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 





Mixing ratio: 4 parts of MAPEFINISH comp. A with 

1 part of MAPEFINISH comp. B. 



Maximum applicable thickness: 2-3 mm per layer. 






Consumption: 2 kg/m² per mm of thickness. 

Packaging: 

30 kg kits: 

– 24 kg bags (comp. A); 

– 6 kg drums (comp. B). 



Mixing ratio: 100 parts of MONOFINISH with 




Maximum applicable thickness: 2-3 mm per layer. 









Mixing ratio: 100 parts of NIVOPLAN with 25 parts 

of water. 

Pot life of mix: 2-3 hours (at +23°C). 




CS IV. 










Pot life of mix: 20-30 minutes (at +20°C). 


Maximum applicable thickness: 3 mm per layer. 

Classification: EN 1504-2 - coating (C) principles 

MC and IR. 





Planitop 200 

One-component, high-bonding 


uneven surfaces and finishing (with 

natural effect) internal and external 

walls. 

Planitop 207 

One-component, high-bonding 


uneven surfaces and rough finishing 

internal and external masonry and 

concrete walls. 


Quick-setting, fibre-reinforced 

cementitious levelling mortar for internal 

and external floors and walls, applied 

in layers from 3 to 30 mm to even out 

irregularities. 

Triblock Finish 

Three-component, epoxy-cementitious 

mortar for smoothing damp substrates. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 





Mixing ratio: 100 parts of PLANITOP 200 with 20-23 parts 

of water. 

Pot life of mix: approximately 1 hour and 30 minutes 

(at 20°C). 


Maximum applicable thickness: 3 mm per layer (6 mm in 

2 layers with MAPENET 150 sandwiched between). 







Consumption: approximately 1.3 kg/m² per mm of 

thickness. 








Maximum applicable thickness: 3 mm per layer 

(6 mm in 2 layers with MAPENET 150 sandwiched 

between). 








thickness. 




Mixing ratio: 100 parts of PLANITOP FAST 330 with 














Mixing ratio: 

comp. A : comp. B : comp. C = 4.8 : 15.2 : 80. 



Maximum applicable thickness: 3 mm per layer 

(up to 5 mm on limited areas). 




Application: trowel or rendering machine. 


Packaging: 


– 1.5 kg drums (comp. A); 

– 4.75 kg drums (comp. B); 

– 25 kg bags (comp. C). 

145

146 

17. SMOOTHING PRODUCTS FOR CONCRETE AND RENDER SURFACES 

17.2 Renders ___________________________________________________________________________________ 

Planitop 530 

Natural-finish, lime and cement-based 

smoothing compound for fresh and 

cured internal and external render, 

applied at a thickness up to 3 mm. 

Planitop 540 

Natural finish smoothing compound for 

“cured” internal and external concrete 

and render, applied at a thickness up 

to 3 mm. 

Planitop 560 

Lime and cement-based levelling 

compound for smooth finishing layers 

on internal and external “fresh” and 

“cured” cementitious render, applied at 

a thickness from 0 mm to 3 mm. 

Planitop 580 

White lime and gypsum-based 

smoothing compound for smooth 

finishing layers on “dry” and “cured” 

internal gypsum, anhydrite or lime/ 

cement-based renders. 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 






Pot life of mix: approximately 2 hours (at +20°C). 




CS IV. 




















thickness. 



Maximum dimension of aggregate: < 0.1 mm. 







CS IV. 









60 parts of water. 









147

PRODUCTS FOR ANCHORING 

AND RAPID FIXING

150 

18. PRODUCTS FOR ANCHORING AND RAPID FIXING 

Lampocem 

Ready-to-use, quick-setting and 

hardening, anti-shrinkage hydraulic 

binder. 

Mapefill 

Fluid expansive mortar for anchoring 

objects in place. 

Mapefill R 

Quick-hardening, fluid expansive mortar 

for quickly anchoring objects in place. 

Mapefix EP 

Pure epoxy resin chemical 

fastener for structural loads. 

EN 1504-6 



EN 1504-6 

ANCHORING MORTAR 

EN 1504-6 



EN 1504-6 


European Technical Approval 

option 1 for cracked concrete 


option 7 for non cracked concrete 



Mixing ratio: 100 parts of LAMPOCEM with 


Pot life of mix: approximately 1 minute (at +23°C). 



Consumption: 1.8 kg/dm³ of cavities to be filled. 

Packaging: 25 kg bags, boxes of 4x5 kg packets, 

packages of 4x5 kg cartridges and packages of 

9x1 kg cartridges. 



Mixing ratio: 100 parts of MAPEFILL with 14-15 parts 

of water. 






Consumption: 1.95 kg/m³ of cavities to be filled. 




Mixing ratio: 100 parts of MAPEFILL R with 







Consumption: 1.95 kg/m³ of cavities to be filled. 



Suitable substrates: all full and perforated substrates, 

such as concrete and concrete derivates, brickwork, 

mixed masonry, wood and rock. 

Recommended perforation technique: drill, hammer 

drill, core drilling, diamond-tipped tools. 

Condition of hole for application: clean; dry or damp 

or wet. 

Workability time at +20°C: 30’. 

Final hardening time at +20°C: 10 h (dry substrate), 

20 h (wet substrate). 

Recommended diameter of fastener: from M8 to M39, 

from φ8 to φ40. 

Certification available: CE mark; ETA option 7 

(fasteners in compressive side); ETA option 1 

(fasteners in tensile side); reaction to fire. 


Packaging: 385 ml.

Mapefix PE SF 

Styrene-free, polyester resin 

chemical fastener for light loads. 

Mapefix VE SF 

Styrene-free, hybrid vinyl resin 

chemical fastener for heavy loads. 

Planigrout 300 

Three-component fluid epoxy mortar 

for repairing deteriorated concrete 

elements and for high-precision 

anchorage work. 






post installed rebar 

EN 1504-6 



EN 1504-6 



Suitable substrates: all perforated substrates; may 

also be used on concrete, brickwork and mixed 

masonry. 

Recommended perforation technique: drill or 

hammer-drill. 

Condition of hole for application: clean, dry or damp. 

Application temperature range of substrate: 

+5/+35°C. 


Final hardening time at +20°C: 45’ (dry substrate), 

90’ (wet substrate). 

Recommended diameter of fastener: from M8 to M24. 

Certification available: CE mark; ETA option 7 

(fasteners in compressive side). 


Packaging: 300 ml, 380 ml. 


Suitable substrates: all full and perforated substrates, 

such as concrete and concrete derivates, brickwork, 

mixed masonry and wood. 

Recommended perforation technique: drill or 

hammer-drill. 

Condition of hole for application: clean; dry, damp 

or wet. 

Application temperature range of substrate: 

-10°C/+35°C. 


Final hardening time at +20°C: 45’ (dry substrate), 90’ 

(wet substrate). 

Recommended diameter of fastener: from M8 to M30, 

from φ8 to φ32. 

Certification available: CE symbol; ETA option 7 

(fasteners in compressive side); ETA rebar option (added 

reinforcement fasteners); reaction to fire. 


Packaging: 300 ml, 380 ml. 



Mixing ratio: 

comp. A : comp. B : comp. C = 16 : 6 : 100. 

Pot life of mix: 1 hour (at 23°C). 






Packaging: 

12.2 kg kits: 




36.6 kg units: 




151

PRODUCTS FOR STRUCTURAL 

BONDING, SCREED REPAIRING AND 

INJECTING INTO CRACKED CONCRETE

154 

19. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE 

Adesilex PG1 

Two-component, rapid-setting 

thixotropic adhesive for structural 

bonds. 

Adesilex PG1 Rapid 



bonds. 

Adesilex PG2 

Two-component thixotropic epoxy 

adhesive with long workability time for 

structural bonds. 

Adesilex PG4 

Two-component, thixotropic epoxy 

adhesive with modified rheology for 

bonding MAPEBAND, MAPEBAND 

TPE, PVC strips and Hypalon and for 


EN 1504-4 



EN 1504-4 


EN 1504-4 



EN 1504-4 


EN 1504-4 



EN 1504-4 


EN 1504-4 



EN 1504-4 





Minimum applicable thickness: 1-2 mm. 





Consumption: 1.65-1.75 kg/m² per mm of thickness. 

Packaging: 

2 kg kits: 



6 kg kits: 












Packaging: 

6 kg kits: 

– 4 kg drums (comp. A); 











Packaging: 

6 kg kits: 












Packaging: 

6 kg kits: 



30 kg kits: 


– 7.5 kg drums (comp. B).

Epojet 

Two-component, super-fluid epoxy 

resin applied by injecting. 

Epojet LV 

Two-component epoxy resin with a very 

low viscosity for injecting into microcracks. 

Eporip 

Two-component epoxy adhesive for 

monolithic sealing of cracks in screeds. 

Eporip Turbo 

Two-component, quick-hardening 

polyester resin for monolithic sealing of 

cracked screeds. 

EN 1504-5 



EN 1504-5 

CONCRETE INJECTION 

EN 1504-6 



EN 1504-6 


EN 1504-5 



EN 1504-5 


EN 1504-4 



EN 1504-4 





Classification: EN 1504-5 and EN 1504-6. 


Application: injection or pouring. 

Consumption: 

– sealing cracks: 1.1 kg/l of cavities to be filled; 

– bonding concrete to steel: 1.1 kg/m² per mm of 

thickness. 

Packaging: 

2.5 kg kits: 


– 0.5 kg bottles (comp. B). 

4 kg kits: 









Consumption: 



thickness. 

Packaging: 

2.5 kg kits: 








Application: brush or pouring. 

Consumption: 

– second pours: 0.5-2 kg/m²; 

– sealing cracks: 1.35 kg/l of cavities to be filled. 

Packaging: 

2 kg kits: 



10 kg kits: 

– 7.5 kg metal drums (comp. A); 






Application: brush or pouring. 

Consumption: 1.7 kg/l of cavities to be filled. 

Packaging: 

boxes of 6x508 g kits: 

– 500 g metal drums (comp. A); 

– 8 g tubes (comp. B). 

155

PRODUCTS FOR GALVANIC 

CATHODIC PROTECTION OF 

METALLIC STRUCTURES

158 

20. PRODUCTS FOR GALVANIC CATHODIC PROTECTION OF METALLIC STRUCTURES 

Mapeshield S 

Zinc plate with adhesive backing for 

galvanic cathodic protection against the 

corrosion of steel structures exposed to 

atmospheric conditions. 


Thickness of plate: 0.80 mm. 

Height: 

– MAPESHIELD S 100: 10 cm; 

– MAPESHIELD S 200: 20 cm; 

– MAPESHIELD S 300: 30 cm. 

Weight: 0.70 kg/m² ± 5%. 


Application: on the surface of metal structures. 

Packaging: 

– MAPESHIELD S 100: boxes containing 

5 10 cm x 50 m rolls; 


3 20 cm x 50 m rolls; 


2 30 cm x 50 m rolls.

159

COMPOSITE SYSTEMS FOR 

STRUCTURAL STRENGTHENING

162 

21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING 

21.1 Strengthening concrete and steel structures ____________________________________________________ 

Adesilex PG1 



bonds. 

Adesilex PG1 Rapid 


thixotropic epoxy adhesive for structural 

bonds. 

Adesilex PG2 

Two-component thixotropic epoxy 

adhesive with long workability time for 


Carboplate 

Pultruded carbon fibre plate 

impregnated with epoxy resin with a 

protective plastic film on both faces. 

EN 1504-4 



EN 1504-4 


EN 1504-4 



EN 1504-4 


EN 1504-4 



EN 1504-4 











Packaging: 

2 kg kits: 



6 kg kits: 












Packaging: 

6 kg kits: 












Packaging: 

6 kg kits: 




Modulus of elasticity: 170 - 200 - 250 GPa. 

Fibre content: 68% - 68% - 65%. 


Width: 50, 100 and 150 mm. 

Resistant section: 70, 140 and 210 mm². 

Tensile strength (MPa): 3,100 - 3,300 - 2,500. 

Elongation at failure: 2% - 1.4% - 0.9%. 

Packaging: 25 m rolls.

Carbotube 

Pultruded carbon fibre tube 

impregnated with epoxy resin for 

reinforced injections in masonry. 

Epojet 


resin applied by injecting. 

Injectors Ø 23 

Plastic injectors with a non-return valve 

for injecting epoxy resin. 

Mapegrid B 250 

Primed basalt-fibre mesh (250 g/m²) for 

structural reinforcement of stone, brick, 

tuff and concrete surfaces. 

EN 1504-5 



EN 1504-5 


EN 1504-6 



EN 1504-6 



Tensile modulus of elasticity: 170,000 N/mm². 

Content of fibre by weight: 68%. 

Tensile strength: 3,100 N/mm². 

Outside diameter: 10 mm. 

Inside diameter: 8 mm. 

Elongation at failure: 1.6%. 

Packaging: boxes of 10x2 m rolls. 




Classification: EN 1504-5 and EN 1504-6. 



Consumption: 



thickness. 

Packaging: 

2.5 kg kits: 



4 kg kits: 




Outside diameter: 23 mm. 

Length: 80 mm. 

Diameter of hole: 5 mm. 


Type of fibre: basalt fibre. 


Mesh size: 6 x 6 mm. 

Tensile strength (MPa): ≥ 3000. 


Packaging: 1 m x 50 m rolls. 

163

164 


Mapegrid G120 

Pre-primed, alkali-resistant (A.R.) glass 

fibre mesh, for localised reinforced 

“strengthening” of masonry substrates. 

Mapegrid G220 

Alkali-resistant, primed glass fibre mesh 

for structural “reinforced” strengthening 

of stone, brick and tuff substrates. 

Maperod C 

Pultruded carbon fibre tube 

impregnated with epoxy resin for 

structural strengthening of damaged 

concrete and masonry elements. 

Maperod G 

Pultruded carbon fibre rods 

impregnated with epoxy-modified 

vinylester resin for structural 

reinforcement of damaged reinforced 

concrete, brick, stone and tuff elements. 


Type of fibre: A.R. type glass fibre 


Mesh size: 12.7 x 12.7 mm. 

Tensile strength (kN/m): 30. 

Elongation at failure: < 3%. 

Packaging: 25 m x 45 cm rolls. 


Type of fibre: A.R. type glass fibre. 


Mesh size: 25 x 25 mm. 

Tensile strength (kN/m): 45. 

Elongation at failure: < 3%. 

Packaging: 45.70 m x 90 cm rolls. 


Modulus of elasticity: 155,000 N/mm². 

Fibre content: 71%. 

Transversal section: 73.9 mm². 

Tensile strength: 2,000 N/mm² . 

Single shear strength: 75 N/mm² . 

Nominal diameter: 9.7 mm. 

Packaging: boxes of 10x2 m rolls. 



Fibre content: 75%. 

Transversal section: 71.26 mm². 

Tensile strength: 760 N/mm². 

Nominal diameter: 9.53 mm. 

Packaging: boxes of 10x6 m rolls.

MapeWrap 11 

Two-component, normal-setting, 

thixotropic epoxy grout for evening 

out concrete surfaces. 

MapeWrap 12 

Two-component, slow-setting, 

thixotropic epoxy grout for evening out 

concrete surfaces. 

MapeWrap 21 


resin for impregnating MAPEWRAP 

using the “damp system”. 

MapeWrap 31 

Two-component, medium-viscosity 

epoxy adhesive for impregnating 

MAPEWRAP using the “dry system”. 

EN 1504-4 



EN 1504-4 


EN 1504-4 



EN 1504-4 




Workability time: 40 minutes (at +23°C). 

Bond strength to concrete: > 3 N/mm² (after 7 days 

at +23°C - failure of substrate). 




Packaging: 

6 kg kits: 











Packaging: 

6 kg kits: 








Brookfield Viscosity: 300 mPa·s (rotor 1 - 10 revs). 

Consumption: according to the type and width of 

the fabric. 

Packaging: 

5 kg kits: 








Brookfield Viscosity: 7,000 mPa·s (rotor 3 - 5 revs). 

Consumption: according to the type and width of the 

fabric. 

Packaging: 

5 kg kits: 



165

166 


MapeWrap B UNI-AX 

Unidirectional, high strength basalt 

fibre fabric. The fibre is available in two 

weights with the same width. 

MapeWrap C BI-AX 

Balanced, high-strength, bi-directional 

carbon fibre fabric. 

MapeWrap C Fiocco 

Carbon fibre cord to be impregnated 

with MAPEWRAP 21 (two-component, 

super-fluid epoxy resin). 

MapeWrap C 

QUADRI-AX 

Balanced, high-strength, quadridirectional 

carbon fibre fabric. 


Weight: 400-600 g/m². 

Equivalent thickness of dry fabric: 0.143-0.214 mm. 

Tensile strength (N/mm²): > 4.840. 

Tensile modulus of elasticity (GPa): 89. 

Width: 40 cm. 


Packaging: 50 m rolls. 


Weight: 230-360 g/m². 


Tensile strength (MPa): > 4.800, > 4.800. 

Tensile modulus of elasticity (GPa): 230-230. 

Width: 20-40 cm. 




Diameters available: 6, 8, 10 and 12 mm. 

Equivalent surface area of dry fabric: 

diam. 6 mm 15.70 mm²; 

diam. 8 mm 21.24 mm²; 

diam.10 mm 26.79 mm²; 

diam.12 mm 31.40 mm²; 






Weight: 380-760 g/m². 


Tensile strength (MPa): > 4.800. 


Width: 30-48.5 cm. 


Packaging: 50 m rolls.

MapeWrap C UNI-AX 

High-strength, unidirectional carbon 

fibre fabric with a high modulus of 

elasticity (230,000 N/mm²). 

A version with a very high modulus 

of elasticity (390,000 N/mm²) with the 

same weight and width is also available 

upon request, called MAPEWRAP C 

UNI-AX HM. 

MapeWrap G Fiocco 

Glass fibre cord to be impregnated 

with MAPEWRAP 21 (two-component, 

super-fluid epoxy resin). 

MapeWrap G 

QUADRI-AX 

Balanced, quadri-directional glass 

fibre fabric. 

MapeWrap G UNI-AX 

Unidirectional, high strength glass fibre 

fabric. 


Weight: 300-600 g/m². 





Width: 10 - 20 - 40 cm. 



Type of fibre: E type glass. 

Diameters available: 6, 8, 10 and 12 mm. 

Equivalent surface area of dry fabric: 

diam. 6 mm 16.34 mm²; 

diam. 8 mm 21.45 mm²; 

diam. 10 mm 27.58 mm²; 

diam. 12 mm 32.69 mm². 



Elongation at failure: > 3%. 





Equivalent thickness of dry fabric: 0.1096 mm. 

Tensile strength (MPa): 2,600. 


Width: 30-48.5 cm. 

Elongation at failure: 3.5-4%. 




Weight: 300-900 g/m². 



Tensile modulus of elasticity (GPa): 80.7. 

Elongation at failure: 3-4%. 

Width: 30-60 cm. 


167

168 


MapeWrap Primer 1 

Two-component epoxy primer 

specifically formulated for the 

MAPEWRAP system. 

MapeWrap S Fabric 

Unidirectional, high-strength metal fibre 

fabric for structural strengthening. 

MapeWrap S Fiocco 

High-strength, steel fibre cord for 

structural strengthening. 

Planitop HDM 

Two-component, high-ductility, 

pozzolan-reaction mortar applied in 

layers up to 6 mm thick for “reinforced” 

structural strengthening of masonry 

substrates in combination with 

MAPEGRID G 120, MAPEGRID G 220 

or MAPEGRID B and for smoothing and 

levelling surfaces in concrete, stone, 

brickwork and tuff. 






Brookfield Viscosity: 300 mPa·s (rotor 1 - 10 revs). 


Packaging: 

2 kg kits: 




Type of fibre: metallic fibre. 

Weight (metallic fibres only): 2,100 g/m². 

Load-resistant area per unit of width: 373,80 m²/m. 

Tensile strength: > 2.845 N/mm². 


Elongation at failure: > 2.6%. 

Width: 30 cm. 

Packaging: 25.00 m rolls. 


Type of fibre: high-strength carbon. 

Diameters available: 10 and 12 mm. 

Load-resistant area per unit of width: 

diam.10 mm 4,300 mm²/m; 

diam.12 mm 5,200 mm²/m. 

Maximum load per unit of width: 

diam.10 mm 8,969.8 kN/m; 

diam.12 mm 10,847.2 kN/m. 

Thickness: 

diam.10 mm 4.30 mm; 

diam.12 mm 5.20 mm. 





21.2 Strengthening masonry structures _____________________________________________________________ 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 



EN 1504-3 



EN 1504-3 

R2 

REPAIR MORTAR 



Mixing ratio: 3.7 parts of PLANITOP HDM comp. A 

with 1 part of PLANITOP HDM comp. B. 


Thickness applied: 2-3 mm per layer. 

Classification: EN 1504-2 - surface protection 

systems for concrete. 

EN 1504-3 - class R2 non-structural mortar. 



machine. 


thickness. 

Packaging: 

30.5 kg kits: 


– 6.5 kg drums (comp. B).

Planitop HDM Maxi 

Two-component, high-ductility, 

pozzolan-reaction mortar applied in 

layers up to 25 mm thick for evening 

out stone, brickwork and tuff substrates 

before applying MAPEGRID G 120, 

MAPEGRID G 220 or MAPEGRID B. 

Planitop HDM Restauro 

Two-component, pre-blended, 

high-ductility hydraulic lime (NHL) and 

ECO-POZZOLAN-based light-coloured 

mortar, particularly recommended for 

“reinforced” structural strengthening of 

masonry substrates in combination with 

MAPEGRID G 120, MAPEGRID G 220 

or MAPEGRID B and for evening out 

stone, brickwork and tuff substrates. 

EN 1504-3 



EN 1504-3 

R2 

REPAIR MORTAR 

EN 998-1 



EN 998-1 

GP-CS IV 

RENDERING AND 


EN 998-2 



EN 998-2 

G-M15 




Mixing ratio: 3.7 parts of PLANITOP HDM MAXI 

comp. A with 1 part of PLANITOP HDM MAXI comp. B. 



Classification: EN 1504-3 - class R2 non-structural 

mortar. 



machine. 


thickness. 

Packaging: 






Mixing ratio: 1 25 kg comp. A with 1 drums of 

comp. B. 


Thickness applied: from 3 to 10 mm per layer. 


CS IV and EN 998-2 - type G mortar, class M15. 



machine. 


thickness. 

Packaging: 

30 kg kits: 

– 25 kg bags (comp. A); 


169

PRODUCTS FOR 

THERMAL INSULATION

172 

22. PRODUCTS FOR THERMAL INSULATION 

Adesilex FIS13 

Adhesive and smoothing and levelling 

compound in water dispersion mixed 

with cement for thermal insulation 

systems. 

ETA 04/0061 

Mapetherm AR1 

One-component cementitious mortar for 

bonding and levelling insulation panels 

and for thermal insulation systems. 

ETA 04/0061 

ETA 10/0024 

ETA 10/0025 

Mapetherm AR1 GG 

One component, large-grained 

cementitious mortar for bonding and 

levelling insulation panels and for 

thermal insulation systems. 

ETA 10/0024 

ETA 10/0025 

Mapetherm Ba 

Aluminium starting profiles with drip 

channel, available in sizes 40, 50, 60, 

80 and 100 mm. 






Mixing ratio: 1 part of ADESILEX FIS 13 with 0.7 parts 

of 42.5 cement (in weight). 




Consumption (kg/m²): 

– 1.8-3.2 for bonding panels by spot and bead 

bonding; 

– 1-1.2 per mm of thickness for smoothing and 

levelling. 




Colour: grey. 



Mixing ratio: 21-23% with water (in weight). 




Consumption (kg/m²): 4-6 according to the bonding 

technique used; 1.3-1.5 per mm of thickness when 

used as smoothing compound. 




Colour: grey and white 



Mixing ratio: 20-24% with water (by weight). 




Consumption (kg/m²): 1.35-1.55 per mm of thickness 

when used as smoothing compound (recommended: 

approx. 4 mm in 2 coats). 



Composition: aluminium: 

Colour: grey. 

Sizes available mm: 40, 50, 60, 80 and 100. 

Dimensions m: 2.50. 

Packaging: packages of 20 pieces.

Mapetherm Cork 

Cork insulating panels for thermal 

insulation systems. 

Mapetherm EPS 

Extruded sintered polystyrene insulating 

panels for thermal insulation systems. 

ETA 10/0025 

Mapetherm FIX 

Stud for fixing insulating panels and 

composite insulating systems in place, 

with a plug with a metal/nylon pin and 

polypropylene body. 

ETA 09/0394 

Mapetherm FIX 9 

Polyprpoylene fastener. 


Composition: expanded cork. 


Thickness available mm: 40, 50, 60, 80 and 100. 

Dimensions of panel mm: 1000 x 500. 

Packaging: from 1.5 to 4 m² (according to the 

thickness). 


Composition: sintered expanded polystyrene. 


Thickness available mm: 40, 50, 60, 80 and, 100. 


Packaging: from 3 to 7.5 m² (according to the 

thickness). 


Composition: synthetic material with zinc-plated 

steel nail. 

Colour: grey. 

Sizes available mm: 108, 128, 148. 



Composition: polypropylene. 

Colour: grey. 

Sizes available mm: 83. 


173

174 

22. PRODUCTS FOR THERMAL INSULATION 

Mapetherm FIX B 

Nylon self-tapping studs in 

zinc/chrome-plated steel. 

Mapetherm M. Wool 

High-density, glass wool insulating 

panels for thermal insulation systems. 

ETA 10/0024 

Mapetherm Net 

Alkali-resistant glass fibre mesh suitable 

for reinforced skimming layers when 

repairing façades, or for the execution 

of MAPETHERM thermal insulation 

systems. 

ETA 10/0024 

ETA 10/0025 

ETA 04/0061 

Mapetherm Profil 

Pre-mounted aluminium angle iron 

incorporated with alkali-resistant glass 

fibre mesh. 


Composition: nylon and zinc/chrome-plated steel. 

Colour: grey. 

Sizes available mm: 45. 



Composition: high density glass wool. 

Colour: yellow. 



Packaging: from 2.88 to 7.2 m² (according to the 

thickness). 


Composition: 100% glass fibre. 


Mesh size (mm): 4.15 x 3.8. 

Weight of primed mesh (g/m²): approx. 150. 

Storage: unlimited. 

Packaging: 50x1 m rolls. 


Composition: aluminium: 

Colour: grey. 

Dimensions m: 2.50. 

Packaging: boxes of 100 pieces.

Mapetherm XPS 

Polystyrene insulating panels for 


ETA 04/0061 


Composition: extruded polystyrene. 

Colour: blue. 



Packaging: from 2.88 to 6.48 m² (according to the 

thickness). 

175

PRODUCTS FOR TREATING 

ASBESTOS CEMENT SLABS

178 

23. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS 

Aquaflex 

Liquid membrane used to form a 

permanent shell around asbestos 

cement and for flexible waterproofing 

membranes. 

Primer for Aquaflex 

Synthetic resin primer in solvent, 

specifically formulated for bitumen 

surfaces in asbestos cement and 

surfaces with unknown adherence 

properties. 

Vinavil 03V 

Specially for asbestos 

Temporary encapsulation of 

asbestos-cement panels. 






Dilution rate: 5-10% of water. 

Waiting time between each coat: 24 hours. 




Application: roller, brush, trowel or spray. 

Consumption (kg/m²): approx. 0.4 (for one coat of the 

product). 

Packaging: 5, 10 and 25 kg. 






Dilution rate: ready to use; 30-40% of nitro thinners 

for surfaces with poor absorbency. 


6-8 hours. 


Cleaning: white spirit or nitro thinners. 



Consumption (kg/m²): approx. 0.16. 




Colour: red. 



Dilution rate: ready to use; 25% of water if applied 

by pump. 


1- 2 hours. 




Application: roller, brush or pump. 

Consumption (kg/m²): approx. 0.2-0.3. 

Packaging: 5, 10 and 25 kg.

179

WALL PROTECTIVE AND 

DECORATIVE COATINGS

182 

24. WALL PROTECTIVE AND DECORATIVE COATINGS 

Antipluviol 

High-performance, silicone waterrepellent 

in watery solution for external 

walls. 

Antipluviol S 

Ultra high-performance, transparent, 

siloxane resin water-repellent 

impregnator. 

Antipluviol W 

Transparent, silane and siloxane waterrepellent 

impregnator in watery solution. 

Colorite Beton 

Semi-transparent, anti-carbonatation 

acrylic paint with a smooth finish for 


Drop 

Effect 

Drop 

Effect 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 



Drop 

Effect 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 









Surface drying time: 1-2 hours. 





Consumption (kg/m²): 0.1-0.5 (for one coat of 

the product, according to the absorbency of the 

substrate). 






Active substance content (%): 9. 



Cleaning: solvent (benzene, white spirit, etc.). 



Consumption (kg/m²): 0.1-1 (for one coat of 


substrate). 




Colour: milky. 


Active substance content (%): 8. 






Consumption (kg/m²): 0.2-1 (for one coat of 


substrate). 




Colour: colours from the colour chart range or other 

colours using the ColorMap ® automatic colouring 

system 









Consumption (kg/m²): 0.25-0.3 (for two coats). 

Packaging: 20 kg.

Colorite Matt 

Highly-transpirant water-based paint for 

internal and external use with excellent 

hiding power. 

Colorite Performance 

Protective acrylic paint with high 

resistance to UV rays for internal and 

external use, available in a wide range 

of colours. 

Duresil EB 

Two-component, anti-acid epoxy paint 

modified with hydro-carbide resin for 

protecting concrete and steel surfaces. 

Dursilite 

Washable water-based paint with low 

dirt pick-up for internal walls. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 



EN 1504-2 



PRINCIPLES 

PI-MC-RC-IR 





Colour: white or various colours using the ColorMap ® 

automatic colouring system. 









Consumption (kg/m²): 0.3-0.4 (for two coats of the 

product). 















product). 



Consistency: component A fluid paste, 


Colour: component A beige, component B black. 



Dry solids content: (EN ISO 3251) (%): 

component A 100, component B 1.00. 


Complete hardening time: 48 hours. 


Cleaning: nitro solvent or white spirit. 



Consumption (kg/m²): 0.4-0.5 (for one coat of the 

product). 















product). 


183

184 


Elastocolor Net 

Alkali-resistant glass fibre mesh for 

reinforcing ELASTOCOLOR RASANTE 

and ELASTOCOLOR RASANTE SF. 

Elastocolor Paint 

Elastomeric, crack-bridging, 

permanently flexible, protective paint 

with high resistance to chemicals for 


Elastocolor Primer 

Synthetic resin primer in solvent 

specifically formulated to guarantee 

excellent insulation and improve the 

bond of ELASTOCOLOR PAINT, 

ELASTOCOLOR RASANTE and 

ELASTOCOLOR RASANTE SF to the 

substrate. May also be used as a curing 

agent for repair mortar. 

Elastocolor Rasante 

Fibre-reinforced, elastomeric, high 

flexibility finishing product with good 

defect covering capacity, for internal 

and external applications. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 



EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 




Composition: 100% glass fibre. 


Mesh size (mm): 2.7 x 2.7. 

Weight of primed mesh (g/m²): approx. 61. 
















product). 







Dilution rate: ready to use; 30-40% of nitro thinners 

for surfaces with poor absorbency. 


6-8 hours. 


Cleaning: white spirit or nitro thinners. 











Dilution rate: as is or diluted with 5% of water. 





Application: roller, brush, trowel or spray. 

Consumption: 

– trowel: 300-400 g/m² per coat; 

– brush or roller: approx. 400 g/m² per coat; 

– spray 400-700 g/m² per coat. 

Packaging: 20 kg.

Elastocolor 

Rasante SF 

Fibre-reinforced elastomeric, 

thick-layered finishing product with 

high filling properties, for internal and 

external surfaces. 

Elastocolor Waterproof 

Waterproof, easy-to-clean acrylic paint 

for internal and external surfaces in 

permanent contact with water. 

Malech 

Acrylic resin undercoat in water 

dispersion to even out the absorption 

of substrates before applying other 

products. 

Mapecoat DW 25 


anti-acid and non-toxic coatings on 

concrete surfaces, suitable for contact 

with drinking water. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 



EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 














Application: trowel, roller, brush or spray. 

Consumption: 

– trowel: 700-800 g/m² per coat; 

– brush or roller: approx. 500 g/m² per coat; 

– spray 800-1000 g/m² per coat. 




Colour: colours from the colour chart range using the 

ColorMap ® automatic colouring system 



Dilution rate: as is or diluted with 5-10% of water. 






Consumption: 

– 0,3-0,5 kg/m² (for two coats of the product) for structures 

which are not immersed in water; 

– 0,6-0,8 kg/m² (for two/three coats of the product) for 

structures which are immersed in water. 








Dilution rate: ready to use; 30-35% of water for 

surfaces with low absorbency. 


24 hours. 






Consumption: 0,10-0,15 kg/m². 



Consistency: component A: thick paste, component 

B: fluid paste. 

Colour: component A: white, component B: 

transparent. 











product). 


185

186 


Mapecoat I 24 

Two-component epoxy varnish for antiacid 

coatings on concrete surfaces. 

Mapecoat W 

Two-component, epoxy paint in water 

dispersion for protecting cementitious 

substrates. 

Quarzolite Base Coat 

Coloured acrylic undercoat with a 

smooth finish and good filling and 

adhesion promoting properties, for 


ETA 10/0024 

ETA 10/0025 

Quarzolite Graffiato 

Highly protective acrylic scratcheffect 

coating product for evening out 

surface defects on internal and external 

surfaces. 

ETA 10/0024 

ETA 10/0025 

EN 1504-2 



PRINCIPLES 

PI-MC-PR-RC-IR 



EN 15824 



EN 15824 

EXTERNAL AND INTERNAL PLASTERS 

BASED ON ORGANIC BINDERS 


Consistency: component A thick paste, 


Colour: component A white, grey (Ral 7001) and 

neutral, component B transparent. 











product). 



Consistency: component A fluid paste, 

component B thick paste. 

Colour: component A transparent, component B 

white or grey. 





Complete hardening time: 8-10 days. 






product). 















product). 






Density (EN ISO 2811-1) (g/cm³): approx. 1.7-1.8 

(according to the grain size). 







Application: stainless steel or plastic float. 


– 1.2 mm: 1.9-2.3 kg/m²; 

– 1.8 mm: 2.4-2.8 kg/m². 

Packaging: 20 kg.

Quarzolite Paint 

Acrylic paint with micro-granular quartz 

with a smooth finish for long-lasting 

protection of internal and external 

surfaces. 

Quarzolite Tonachino 

High-protection, thick-layered acrylic 

coating product with high filling 

properties for internal and external 

surfaces. 

ETA 10/0024 

ETA 10/0025 

Quarzolite Tonachino 

Plus 

High-protection, mould and mildewresistant 

acrylic coating product with 

good sanitising properties, for internal 

and external surfaces. 

Silancolor AC Paint 

Water-repellent acrylic-siloxane paint 

with high resistance to UV rays for 


EN 15824 



EN 15824 



EN 15824 



EN 15824 
















product). 
















– 0.7 mm: 1.7-2.0 kg/m²; 

– 1.2 mm: 1.9-2.3 kg/m²; 

– 1.5 mm: 2.2-2.6 kg/m²; 

– 2.0 mm: 2.6-3.0 kg/m². 
















– 1.2 mm: 1.9-2.3 kg/m²; 

– 1.5 mm: 2.2-2.6 kg/m². 







Dry solids content (EN ISO 3251-1) (%): approx. 66. 








product). 


187

188 


Silancolor 

AC Tonachino 

Water-repellent, thick-layered acrylicsiloxane 

coating with high filling 


surfaces. 

Silancolor Base Coat 

Water-repellent, coloured acrylic 

undercoat with a smooth finish and 

good filling properties for internal and 


ETA 10/0024 

ETA 10/0025 

Silancolor 

Cleaner Plus 

Hygienising detergent in watery 

solution. 

Silancolor Graffiato 

Transpirant, water-repellent, scratcheffect 

siloxane coating product with 

good defect covering properties for 


ETA 10/0024 

ETA 10/0025 

EN 15824 



EN 15824 



Drop 

Effect 

EN 15824 



EN 15824 








Dry solids content (EN ISO 3251-1) (%): approx. 80. 







Consumption (kg/m²): 1.2 mm: 1.9-2.3. 















product). 






Dry solids content: (EN ISO 3251) (%): //. 

Dilution rate: 300% of water. 


24 hours. 




Application: manual spray or brush. 

Consumption (kg/m²): 0.2-1 (ready-to-use solution). 
















– 1.2 mm: 1.9-2.3 kg/m²; 

– 1.8 mm: 2.4-2.8 kg/m². 

Packaging: 20 kg.

Silancolor Paint 

Transpirant, water-repellent, 

siloxane paint resistant to aggressive 

environments for internal and external 

surfaces. 

Silancolor Paint Plus 

Transpirant, water-repellent, antimildew 

and mould hygienising siloxane 

paint for internal and external surfaces. 

Silancolor Primer 

Transpirant siloxane undercoat with a 

smooth finish. 

Silancolor Primer 

Plus 

Silane and siloxane, anti-mildew and 

mould insulating undercoat in water 

emulsion. 

Drop 

Effect 

Drop 

Effect 














product). 















product). 









24 hours. 














24 hours. 







189

190 


Silancolor Tonachino 

Transpirant, water-repellent, thicklayered 

siloxane coating product with 

high filling properties for internal and 


ETA 10/0024 

ETA 10/0025 

Silancolor 

Tonachino Plus 

Transpirant, water-repellent, 

anti-mildew and mould siloxane 

hygienising and coating product for 


Silexcolor Base Coat 

Transpirant, coloured silicate undercoat 

with a smooth finish and good filling 


surfaces. 

ETA 10/0024 

ETA 10/0025 

Silexcolor Graffiato 

Highly transpirant, scratch-effect silicate 

coating product with defect-covering 


surfaces. 

ETA 10/0024 

ETA 10/0025 

EN 15824 



EN 15824 



EN 15824 



EN 15824 



Drop 

Effect 

EN 15824 



EN 15824 

















– 0.7 mm: 1.7-2.0 kg/m²; 

– 1.2 mm: 1.9-2.3 kg/m²; 

– 1.5 mm: 2.2-2.6 kg/m²; 

– 2.0 mm: 2.6-3.0 kg/m². 
















– 0.7 mm: 1.7-2.0 kg/m²; 

– 1.2 mm: 1.9-2.3 kg/m². 








Dilution rate: as is or 5% of water. 







product). 
















– 1.2 mm: 1.9-2.3 kg/m²; 

– 1.8 mm: 2.4-2.8 kg/m². 

Packaging: 20 kg.

Silexcolor Marmorino 

Highly-decorative, fine-grained, silicate 

mineral coating product in paste 

form with high chemical resistance 

for internal and external surfaces, 

according to DIN 18363 Standards. 

Silexcolor Paint 

Highly-transpirant silicate paint with 

a high chemical bond for internal and 

external surfaces, according to 

DIN 18363 Standards. 

Silexcolor Primer 

Highly transpirant silicate undercoat 

with a smooth finish, according to 

DIN 18363 Standards. 

ETA 04/0061 

Silexcolor Tonachino 

Highly transpirant, thick-layered 

silicate coating product with high filling 


surfaces. 

ETA 04/0061 

ETA 10/0024 

ETA 10/0025 

EN 15824 



EN 15824 















Consumption (kg/m²): 0.8-1.0 (according to the type 

of finish required). 








Dilution rate: 20% of SILEXCOLOR PRIMER. 







product). 









24 hours. 




















Consumption (kg/m²): 0.7 mm: 1.7-2.0 kg/m²; 

1.2 mm: 1.9-2.3 kg/m²; 1.5 mm: 2.2-2.6 kg/m²; 

2.0 mm: 2.6-3.0 kg/m². 


191

192 


WallGard Graffiti 

Barrier 

Anti-graffiti protective barrier. 

WallGard Graffiti 

Remover Gel 

Thixotropic detergent for cleaning 

surfaces damaged by graffiti. 







Drying time: approx. 20 minutes. 

Application temperature range: from +5°C to +35°C 








Colour: straw yellow. 




Usage time: approx. 20 minutes. 





Packaging: 5 kg.

193

WATERPROOFING SYSTEMS

196 

25. WATERPROOFING SYSTEMS 

25.1 Waterproofing structures below ground level _________________________________________________ 

Idrosilex 

Bulk powder or liquid water-repellent 

for cementitious mortar. 

Idrosilex Pronto 

Osmotic cementitious mortar suitable 

for contact with drinking water for 

waterproofing masonry and concrete 

structures. 

Lamposilex 

Ultra quick-setting and hardening 

hydraulic binder for blocking seeping 

water. 

Mapegel 50 

Three-component hydrophilic gel 

for consolidating the ground and for 

injecting concrete barriers. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

MC-IR 




Consistency: powder or liquid. 



Consumption: 

– IDROSILEX LIQUID: 3-5 kg/m² every 100 kg of 

cement; 

– IDROSILEX POWDER: 2-4 kg/m² every 100 kg of 

cement. 

Packaging: 

– IDROSILEX LIQUID: 6 and 25 kg drums; 

– IDROSILEX POWDER: boxes of 25x1 kg. 









Consistency: fine powder. 

Workability time at 20°C: approximately 1 minute. 


Mixing ratio: 100 g of LAMPOSILEX with 28 g 

of water. 

Minimum application temperature: +5°C. 

Consumption: 1.8 kg/dm³ of cavities to be filled. 



Consistency: comp A (liquid), comp B (liquid), 

comp C (solid). 

Viscosity of mix (mPa·s): < 5. 

Storage: 12 months at a temperature of between 

+10°C and +30°C. 

Mixing ratio: comp A: (comp B/water) : comp C 

(weight) = 20 : (1/20) : 0.3. 

Consumption: 

approximately 1 kg/l (of cavities to be filled). 

Packaging: 

21.3 kg kits: 

– comp A 20 kg; 

– comp B 1 kg; 

– comp C 0.3 kg.

Mapelastic Foundation 

Two-component, flexible cementitious 

mortar for waterproofing concrete 

surfaces subject to negative and 

positive hydraulic lift. 

Mapeproof 

Bentonite waterproofing sheets for 

structures below ground level, suitable 

for both horizontal and vertical surfaces. 

Mapeproof CD 

Washers used to fasten MAPEPROOF 

bentonite sheets in place. 

Mapeproof LW 

Bentonite waterproofing sheets for use 

on horizontal and vertical structures 

below ground level with a maximum 

water table of 5 metres. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 



1213-CPD-4489 

1213-CPD-4489 


Consistency: thixotropic. 

Mixing ratio: comp. A: comp. B = 2.2 : 1. 



Minimum applicable thickness: 2 mm in 2 coats. 

Classification: EN 1504-2 - coating (C) principles PI, 

MC and IR. 


Application: roller or spray. 

Consumption: 

– by roller: 1.65 kg/m² per mm of thickness; 

– by spray: 2.2 kg/m² per mm of thickness. 

Packaging: 

32 kg kits: 

component A: 22 kg bags; 

component B: 10 kg drums. 


Lower layer of geo-textile fabric: polypropylene fabric, 

140 g/m². 

Upper layer of geo-textile fabric: non-woven polypropylene 

fabric, 220 g/m². 

Layer of bentonite: natural sodium. 

Aeric mass of bentonite (EN 14196) (12% humidity): 5.1 kg/m². 

Swelling index (ASTM D 5890): 27 ml/2 g. 

Coefficient of permeability (ASTM D 5887): < 1E-11 m/s. 

Static perforation (EN ISO 12236): 2400 N (-50 N). 

Longitudinal tensile strength (EN ISO 10319): > 14.0 kN/m 

(-0.5 kN/m). 

Transversal tensile strength (EN ISO 10319): > 14.0 kN/m 

(-0.5 kN/m). 

Peeling (ASTM D 6496): > 420 N/m. 

Bond strength to concrete (ASTM D 903): > 3.5 N/mm. 

Thickness of product (EN 964-1): 6.0 mm. 

Seal of overlaps: the geo-composite product is self-sealing. 

Packaging: 

1.1 m x 5 m rolls; 

2.5 m x 22.5 m rolls; 

5 m x 40 m rolls. 




Lower layer of geo-textile fabric: polypropylene fabric, 

120 g/m². 

Upper layer of geo-textile fabric: non-woven polypropylene 

fabric, 220 g/m². 

Layer of bentonite: natural sodium. 

Aeric mass of bentonite (EN 14196) (12% humidity): 4.1 kg/m². 

Swelling index (ASTM D 5890): 27 ml/2 g. 

Coefficient of permeability (ASTM D 5887): < 1E-11 m/s. 

Static perforation (EN ISO 12236): 1800 N (-50 N). 

Longitudinal tensile strength (EN ISO 10319): > 12.0 kN/m 

(-0.5 kN/m). 

Transversal tensile strength (EN ISO 10319): > 12.0 kN/m 

(-0.5 kN/m). 

Peeling (ASTM D 6496): > 385 N/m. 

Bond strength to concrete (ASTM D 903): > 2.7 N/mm. 

Thickness of product (EN 964-1): 5.0 mm. 

Seal of overlaps: the geo-composite product is self-sealing. 

Packaging: 

– 2.5 m x 22.5 m rolls; 

– 5 m x 40 m rolls. 

197

198 


Mapeproof Mastic 

Bentonite paste made from natural 

sodium bentonite and plasticising 

additives for sealing elements which 

pass through surfaces. 

Mapeproof Seal 

Natural sodium bentonite in powder 

form for localised strengthening of 

waterproofing layers made using 

MAPEPROOF bentonite sheets. 

Mapeproof Swell 

Hydro-expansive, rubber-based 

hydrophilic sealant paste in tubes, 

applied using an extrusion pistol. 

Plastimul 

Bitumen waterproofing emulsion 

for general purpose use. 


Density: 1.50 kg/dm³. 

Composition: 

– 50% natural sodium bentonite: 

– 50% non-toxic plasticising agents. 

Behaviour in water: the bentonite hydrates freely and 

swells. 

Behaviour in air: does not dry. 



Montmorillonite (XRD): > 95%. 

Free swelling (ASTM D 5890): > 27 ml/2 g. 

Fluid loss (ASTM D 5891): < 18 ml. 

Absorption of methylene blue: > 400 mg/g. 

Liquidity limit (UNI 10040): > 550%. 

Water absorption (ASTM E 946/43): > 750% 

1500/1000 Marsh viscosity: 38-40”. 

pH of filtered water: 9. 

Packaging: 25 kg paper bags. 



Solubility: non-soluble in water. 




Volumetric expansion in water: minimum 100%. 

Formation of skin: 180-200 min. 

Polymerisation time: 2 mm every 9 hours. 

Consumption: approximately 320 ml every 3 metres. 

Shore A hardness (DIN 53505): 32. 

Elongation (DIN 53504): > 700%. 

Ultimate strength (DIN 53504): 2.5 N/mm². 

Modulus of elasticity at 100% elongation 

(DIN 53504): 0.55 N/mm². 

Tear strength (ISO 34-1): 10 N/mm. 

Water-tightness: 1 atm. 

Packaging: boxes containing 6 320 ml cartridges. 



Density: 1.2 g/cm³. 

pH: 10. 



Mixing ratio of first coat (primer): dilute PLASTIMUL 

with 45-50% of water. 

Drying time: 3-6 hours. 

Mixing ratio of second reinforced layer 

(thickness 3 mm): neat PLASTIMUL. 

Minimum application temperature: +5°C. 

Packaging: 12 and 30 kg drums.

Plastimul 1K Super 

Plus 

Mono-component, solvent-free, quickdrying, 

low-shrinkage, high-yield, 

high flexibility bitumen waterproofing 

emulsion containing polystyrene 

spheres and rubber granules. 

Plastimul 2K Plus 

Two-component, solvent-free, quickdrying, 

low-shrinkage, high flexibility 

bitumen waterproofing emulsion 

containing cellulose fibres. 

Plastimul 2K Super 

Two-component, solvent-free, quickdrying, 

low-shrinkage, high-flexibility 

bitumen waterproofing emulsion 

containing polystyrene spheres. 

Plastimul Primer 

Solvent-free, bitumen primer for 

treating substrates before applying 

waterproofing products from the 

PLASTIMUL range. 




pH: 10. 




Drying time: approximately 2 days. 

Resistance to water: after complete hardening 

approx. 2 days. 

Resistance to rain: after approx. 4 hours. 

Resistance to heat (DIN 52123): ≥ 70°C. 

Crack-bridging according to DIN 28052: ≥ 2 mm 

at +4°C. 

Consumption: 0.65 kg/m² per mm of thickness of 

fresh product according to the type of substrate. 



Consistency: paste 

Density: 1.20 g./cm³. 

pH: 10. 




Mixing ratio: comp A : comp B = 22 : 8. 


Drying time: approximately 1-2 days. 

Resistance to water: approx. 2 days. 




at +4°C. 

Consumption: 1.2 kg/m² per mm of thickness of fresh 

product according to the type of substrate. 

Packaging: 30 kg units (A+B = 22+8). 




pH: 10. 




Mixing ratio: comp A: comp B = 4 : 1. 


Drying time: approximately 1-2 days. 

Resistance to water: approx. 2 days. 




at +4°C. 

Consumption: 0.75 kg/m² per mm of thickness of 

fresh product according to the type of substrate. 

Packaging: 22 kg units (A+B = 17.6 + 4.4). 


Consistency: thixotropic liquid. 

Density: 1 g/cm³. 

pH: 10. 




(temperature of substrate). 

Condition of substrate: dry, slightly damp. 

Application of coating products: after hardening. 



199

200 


Resfoam 1 KM 

One-component, super-fluid 

polyurethane resin applied by injection 

for waterproofing concrete and masonry 

structures and ground and rocks 

subject to intense percolating water. 

The setting time may be regulated. 

Drain Front 

TPE angular pipe union for terraces and 

balconies. 

Drain Vertical/Drain 

Lateral 

Kit for installing floor drains, ideal 

for draining off water from terraces, 

balconies, bathrooms, boiler rooms, 

wash-rooms, etc. 


Mixing ratio: resin: catalyst = 1: 0.1-0.2 in weight. 



Consumption: In the open air, a mixture of 1 kg of 

RESFOAM 1 KM (resin) + 0.1 kg of RESFOAM 1 KM 

AKS (catalyser) forms 50 litres of foam upon contact 

with 0.1 litre of water. 

Packaging: 

– RESFOAM 1 KM (resin): 20 kg plastic drums. 

– RESFOAM 1 KM AKS (catalyser): 1 kg plastic drums. 

25.2 Waterproofing structures above ground level ____________________________________________________ 

Aquaflex Roof 

Ready-to-use flexible liquid membrane 

with fibres for continuous waterproofing 

layers on exposed external surfaces. 

Apply two criss-cross coats (maximum 

0.5 mm per coat) with a long-haired 

roller, large brush, trowel or an airless 

spray system. Apply the product on 

clean, dry compact surfaces and 

substrates. 





approximately 8 hours. 

Set to foot traffic: 12 hours at +23°C. 


Colour: white, grey, brick red and oxide red. 


Application: roller, brush or spatula. 




Colour: ivory and copper. 



Diameter: 50, 70 and 100 mm. 

Packaging: 1 kg kits including: 

– vertical or lateral polypropylene drain-pipe 

available in 3 diameters (50, 75 and 90 mm) for 

DRAIN LATERAL and 5 diameters (50-75-82-90-100 

mm) for DRAIN VERTICAL, with a welded 400x400 

mm polypropylene drain-cover; 

– telescopic extension; 

– “anti-odour” plug; 

– removable stainless steel grate.

Mapegum PU 1K 

One-component, solvent-free, flexible 

polyurethane membrane for flexible 

waterproofing coats and bonds for new 

ceramic floors on new and old balconies 

and terraces without removing the old 

ceramic coating. 

Mapegum WPS 

Quick-drying flexible liquid membrane 

for waterproofing internal surfaces. 

Mapelastic 

Two-component, flexible cementitious 

mortar for protecting and waterproofing 

concrete surfaces, balconies, terraces, 

bathrooms and swimming pools. 

Mapelastic 

AquaDefense 

Ready-to-use, ultra quick-drying, 

flexible liquid membrane for 

waterproofing internal and external 

surfaces. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 





Density of the mix: 1500 kg/m³. 



Hardening time for a 2 mm thick layer: 12 hours. 

Waiting time before laying ceramic tiles: 12-24 hours. 


Tensile strength: 1.6 N/mm². 


Tear strength: 10.5 N/mm. 

In service temperature range: from -20°C to +70°C. 

Resistance to 5% lactic acid solution: excellent. 

Resistance to 5% acetic acid solution: excellent. 

Resistance to 5% hydrochloric acid solution: excellent. 

Resistance to 3% potassium hydroxide solution: 

excellent. 



drums. 



Density of the mix: 1.45 g/cm³. 

pH: 9. 



Minimum filming temperature: +5°C. 


Time for complete drying of a 2 mm thick layer: 

5 hours at 23°C 

Time for complete drying of a 2 mm thick layer: 

12 hours at 5°C. 

Waiting time before laying coating: 12-24 hours. 

Resistance to temperature variations: excellent. 

Resistance to ageing: excellent. 

Resistance to solvents and oils: fair. 

Resistance to acids and alkalis: fair. 





Consistency of mix: plastic-trowable. 






MC and IR. 


Application: trowel or by spray. 

Consumption: 

– trowel: 1.7 kg/m² per mm of thickness; 

– spray: 2.2 kg/m² per mm of thickness. 

Packaging: 

– 32 kg units: 24 kg bags + 8 kg tanks; 

– 16 kg units: 2x6 kg bags + 4 kg tanks. 




at +23°C and 50% R.H.. 


approximately 1 hour (at +23°C and 50% R.H.). 

Waiting time before laying coating: 3-4 hours (at +23°C 

and 50% R.H.).. 

Minimum applicable thickness: 0.8 mm in 2 coats. 


Application: roller, brush or trowel. 



201

202 


Mapelastic Smart 

Two-component, high-flexibility 

cementitious mortar applied by brush or 

with a roller, for waterproofing concrete 

surfaces such as balconies, terraces, 

bathrooms and swimming pools and for 

protecting against aggressive agents. 

Mapenet 150 

Alkali-resistant glass fibre mesh (in 

compliance with the ETAG 004 guide) 

for reinforcing protective waterproofing 

layers, anti-fracture membranes and 


Mapetex Sel 

Macro-holed, non-woven polypropylene 

fabric for reinforcing waterproofing 

membranes. 

Monolastic 

One-component cementitious 

waterproofing mortar. 

EN 1504-2 



EN 1504-2 (C) 

PRINCIPLES 

PI-MC-IR 




Consistency of mix: fluid-brushable. 






MC and IR. 



Consumption: 

– brush or roller: 1.6 kg/m² per mm of thickness; 

– spray: 2.2 kg/m² per mm of thickness. 

Packaging: 30 kg units: 20 kg bags + 10 kg tanks. 


Colour: blue. 

Weight: 150 g/m² ± 5%. 

Mesh size: 4x4.5 mm. 






Tensile strength: 5 KN/m. 

Deformation at maximum strain: 

– 90% in a longitudinal direction; 

– 60% in a transversal direction. 



Consistency of mix: plastic-trowable. 



Mixing water: 31-33%. 



Minimum thickness per coat: 1 mm. 

Maximum thickness per coat: 2 mm. 


Packaging: 20 kg paper bags.

Purtop 400 M 

Two-component, solvent-free, hybrid 

polyurethane membrane applied 

by spray using a high-pressure 

bi-mixer pump, for waterproofing 

new constructions or repairing old 

structures, such as bridge and viaduct 

joists. 

Purtop 600 

Two-component, solvent-free, hybrid 

polyurethane membrane applied by 

spray with a high-pressure, bi-mixer 

type pump, to form waterproof coatings 

on new and old buildings directly on site 

(not suitable for vehicles). 

Purtop 1000 

Two-component, solvent-free, 

polyurethane membrane applied by 

spray with a high-pressure, bi-mixer 

type pump, to form waterproof coatings 

directly on site for storage tanks, basins 

and hydraulic works in general. 


A/B ratio (by volume): 100/100. 

Mechanical characteristics (after 7 days at +23°C): 

– tensile strength (DIN 53504) (N/mm²): 14; 

– elongation at failure (DIN 53504) (%): 400; 

– tear strength (ISO 34-1) (N/mm): 55; 

– shore A hardness (DIN 53505): 70; 

– glass transition temperature (°C): -50. 

Application: by spray with a high-pressure bi-mixer 

pump. 

Consumption: 2 kg/m² per 2 mm of thickness. 

Packaging: 

– component A: 210 kg drums; 

– component B: 225 kg drums. 




– tensile strength (DIN 53504) (N/mm²): 6.5; 






pump. 


Packaging: 






– tensile strength (DIN 53504) (N/mm²): 25.3; 






pump. 


Packaging: 



25.3 Sealing and waterproofing joints and fillets _____________________________________________________ 

Adesilex PG4 

Two-component, thixotropic epoxy 

adhesive with modified rheology for 

bonding MAPEBAND, MAPEBAND TPE, 

PVC strips and Hypalon and for 


EN 1504-2 

EN 1504-2 

EN 1504-2 

EN 1504-4 



EN 1504-4 



Workability time: 75 min. 



Application: trowel or smooth trowel. 


Packaging: 30 kg (A+B) and 6 kg (A+B). 

203

204 


Idrostop 

Hydrophilic, expanding rubber profiles 

for waterproof working joints. 

Idrostop B25 

Hydro-expanding bentonite jointing 

material for sealing construction joints. 

Idrostop Mastic 

One-component adhesive for laying 

IDROSTOP. 

Idrostop PVC BE 

PVC waterstop with external lug for 

sealing structural joints. 


Shape: pre-formed tape. 

Sizes available: 

20x10 mm (IDROSTOP 10); 

20x15 mm (IDROSTOP 15); 

20x25 mm (IDROSTOP 25). 


Solubility in water: insoluble. 

Application temperature range using IDROSTOP 

MASTIC as an adhesive: from +10°C to +40°C. 

Waiting time before casting if laying has been carried 

out using IDROSTOP MASTIC: 24 hours. 

Waiting time before casting if fixed in place with nails 

or screws: not required. 

Waterproofness: up to 5 atm. 

Maximum width of joint: 7 mm. 

Packaging: 

IDROSTOP 10: 6x10 m rolls; 

IDROSTOP 15: 6x7 m rolls; 

IDROSTOP 25: 6x5 m rolls. 


Shape: pre-formed tape. 

Size: 20x25 mm. 


Solubility in water: non-soluble. 

Application temperature range: from -5°C to +50°C. 

Waiting time before casting: not required. 






Solubility: non-soluble in water. 


Formation of skin at 23°C and 50% R.H.: 

approximately 20 minutes. 

Polymerisation time: approximately 3-4 mm every 

24 hours. 

Modulus of elasticity at 100% elongation: 1.3 MPa. 

Elongation at failure: 350-450%. 


Waiting time before casting: 24 hours. 

Consumption: approximately 250 ml for 10 metres 

of IDROSTOP. 

Packaging: boxes containing 24x290 ml cartridges. 


Application: mechanically. 

Packaging: IDROSTOP PVC BE is available in two 

sizes: 

– IDROSTOP PVC BE20 (width 20 cm) in 25 m-long 

rolls; 

– IDROSTOP PVC BE24 (width 24 cm) in 25 m-long 

rolls.

Idrostop PVC BI 

PVC waterstop with internal lug for 

sealing structural joints. 

Mapeband 

Alkali-resistant rubber tape with felt for 

cementitious waterproofing systems 

and liquid sheaths. 

Mapeband PE 120 

PVC tape for waterproofing systems 

made from liquid membranes. 

Mapeband TPE 

TPE tape for flexible sealing and 

waterproofing of expansion joints and 

cracks subject to movement. 


Application: mechanically. 

Packaging: IDROSTOP PVC BI is available in three 

sizes: 

– IDROSTOP PVC BI20 (width 20 cm) in 25 m-long 

rolls; 


rolls; 


rolls. 


Tensile strength: > 2 N/mm². 


Tear strength: > 100 N/mm. 


Packaging: 

– 120 mmx50 m rolls; 


– 90° and 270° angular pieces; 

– gaskets for outlets, sizes 120x120 mm and 

400x400 mm; 

– special cross and T pieces. 


Thickness of tape: approximately 0.7 mm. 

Resistance to water under pressure: 1.5 bar. 


In service temperature range: from -5°C to +30°C 

Packaging: 



– 90° and 270° angular pieces; 

– gaskets for outlets, sizes 120x120 mm and 

425x425 mm. 


Sizes available: 

– 17 cm (MAPEBAND TPE 170); 

– 32.5 cm (MAPEBAND TPE 325). 

Width of expanding zone: 

– MAPEBAND TPE 170: 50 mm; 

– MAPEBAND TPE 325: 165 mm. 


Ultimate strength: > 4.5 N/mm². 


Bending at low temperatures: < -30°C. 

Resistance to atmospheric agents and UV rays: 

> 5000 ore. 

Resistance to roots: no roots pass through. 

Inflammability class: B2. 

Waterproofness: ≤ 0.6 N/mm². 


Maximum elongation of expanding zone: 

– 5 mm (MAPEBAND TPE 170); 

– 10 mm (MAPEBAND TPE 325). 


205

206 


Mapefoam 

Closed-cell, extruded foam polyethylene 

cord used as a support for elastomer 

sealants to gauge the correct size of 

flexible joints. 

Supplied in hanks, total length 

proportional to the diameter. 

Mapeflex PU40 

Polyurethane sealant with a low 

modulus of elasticity with movements 

up to 25%. 

ISO 11600 F 25 LM 

Mapeflex PU45 

Polyurethane sealant and adhesive 

with a high modulus of elasticity for 


ISO 11600 F 20 HM 


Castable polyurethane sealant with a 

low modulus of elasticity for movements 

up to 25%. 

ISO 11600 F 25 LM 


Density: 40 kg/m³. 

Tensile strength: 30 N/mm². 

Water absorption: none. 

Colour: grey. 


Packaging: 








Colours: white and grey (other colours available 

upon request). 


EMICODE: EC1 R - very low emssion. 

Consumption: 

– 3.0 meters every 300 ml cartridge; 

– 6.0 meters every 600 soft-cartridge (10x10 mm 

section). 

Packaging: boxes of 12x300 ml cartridges; boxes 

of 20x600 ml soft-cartridges. 



Movement when in service: ± 20%. 

Set to light foot traffic: according to the depth of the 

joint. 


Colour: 

– white, grey and black (300 ml cartridges); 

– grey and black (600 ml soft-cartridges). 




Consumption: 

– 3.0 meters every 300 ml cartridge; 

– 6.0 meters every 600 pieces (10x10 mm section). 

Packaging: 

– boxes of 20 pieces (600 ml soft-cartridges); 

– boxes of 12 pieces (300 ml cartridges). 




Set to light foot traffic: according to the depth of 

the joint. 

Ready for use: according to the depth of the joint. 


Colour: grey. 

Application: casting with an extrusion pistol. 


Consumption: 6.0 metres every 600 tube 


Packaging: boxes of 20 pieces (600 ml soft-cartridges).

Mapesil AC 

Pure, anti-mould, acetic silicone sealant 


ISO 11600 F 25 LM 

DIN 18540 

BS 5889 

ASTM C 920 

TT S 00230C 

TT S 001543A 


Formation of skin: 10 minutes. 

Shrinkage during reticulation: 3.5%. 

Reticulation rate: 4 mm in one day, 10 mm in 7 days. 




Colours: transparent and the 26 colours coordinated 

with the “MAPEI Coloured Grouts” collection. 



Consumption: 3.1 metres every 310 ml cartridge 



207

ADMIXTURES FOR CONCRETE

210 

26. ADMIXTURES FOR CONCRETE 

26.1 Admixture for concrete ______________________________________________________________________ 

Antifreeze Liquid 

Setting and hardening accelerator 

admixture for cementitious mortar. 

Allows work to be carried out at 

temperatures down to -10°C. 

Antifreeze S 

Chloride-free anti-freeze admixture 

to ensure regular setting times of 

cementitious mortar and concrete at 

temperatures down to -10°C. 

Also suitable for pre-compressed 

concrete. 

Dynamon SX 

Modified acrylic super-plasticiser 

for concrete, characterised by its 

low water/cement ratio, very high 

mechanical strength and long 

workability times. 

Expancrete 

Expansive admix for 

controlled-shrinkage concrete. 

EN 934-2 

T 7 

EN 934-2 

T 7 

EN 934-2 

T 3.1-3.2 


Dosage: 1-2 kg every 100 kg of cement. 



Dosage: 1-2 kg every 100 kg of cement. 

Packaging: 

– boxes of 24x1 kg; 

– 6, 12 and 30 kg drums. 


Dosage: 0.5-2 lit every 100 kg of cement for 

conventional concrete, or of the fine parts (through 

a 0.1 mm sieve) for self-compacting concrete. 



Dosage: add between 5 and 8% on the amount 

of cement in the mix. 

Packaging: 25 kg vacuum-packed polyethylene 

sacks.

Idrocrete DM 

Bulk water-repellent admixture. 

Particularly recommended for concrete 

with a damp earth consistency. 

Mapecure SRA 

Curing admixture for cementitious 

mortar and concrete to reduce hydraulic 

shrinkage and the formation of 

micro-cracks. 

Mapefibre NS12/NS18 

Virgin, mono-filament polypropylene 

fibres for mortar and concrete, available 

in diameters of 12 and 18 mm. 

Mapefluid N200 

Super-plasticising sulphonated 

naphthalene admixtures for concrete. 

Permits the amount of mixing water 

to be drastically reduced, with a 

considerable increase in strength, 

even after short curing periods. 

EN 934-2 

T 9 

EN 934-2 

T 3.1-3.2 


Dosage: from 0.2 to 1 kg every 100 kg of cement. 



Consumption: 

Mortar: 0.25-0.5% in weight of the mortar. 

Concrete and beton: 5-8 l/m³. 

Packaging: 

20 kg drums; 

0.25 kg bottles. 


Dosage: 0.4-0.8 kg m³ of concrete or mortar. 

Packaging: boxes of 30x0.6 kg each. 


Dosage: from 0.5 a 1.5 litres every 100 kg of cement. 


211

212 


Mapefluid PZ500 

Pozzolanic-activity super-plasticiser in 

powder form for high-quality mortar and 

concrete. 

Mapefluid PZ504 

Pozzolanic-activity super-plasticiser in 

powder form for high-quality mortar and 

concrete and a low loss in workability. 

Mapefluid R104 

Super-plasticising retardant admixture 

for concrete, particularly suitable for use 

in summer to help maintain workability 

of the mix. 

Mapeplast PT1 

Aerating product for concrete and 

cementitious mortar. 

EN 934-2 

T 3.1-3.2-9 

EN 934-2 

T 5 


Dosage: from 20 to 60 kg per m³ of mix. 



Dosage: from 20 to 60 kg per m³ of mix. 



Dosage: from 0.5 a 1.5 litres every 100 kg of cement. 



Dosage: 

• concrete: from 30 to 150 ml every 100 kg of cement. 

• cementitious mortar: from 100 to 300 ml every 

100 kg of binder. 

Packaging: 

– 12x1 kg packages; 

– 10 and 25 kg drums.

Mapetard 

Retardant admix for concrete and 

mortar with a plasticising effect. 

Retardant action on setting times of 

cement. Particularly suitable for use in 

summer to help maintain workability of 

the mix. 

Planicrete 

Synthetic latex rubber to improve 

adhesion and strength of cementitious 

mortar. 

Form Release Agent 

DMA 1000 

Emulsionable stripping compound for 

wooden formwork. Emulsify one part 

of the product with 5-20 parts of water 

according to the type of formwork. 


DMA 2000 

Ready-to-use chemical/physical action 

stripping compound for metal formwork. 


Dosage: from 0.2 a 0.5 litres every 100 kg 

of cement. 






Consumption: 

– for adhesive slurry: 100-150 g/m²; 

– to prepare screeds and render: 50-80 kg/m³. 


packages. 

26.2 Superficial form release agents and curing compounds ___________________________________________ 

EN 934-2 

T 8 


Application: brush or spray. 

Consumption: 10-30 g/m² of neat product. 

Packaging: 4.5, 23 and 9 kg drums. 



Consumption: 20-40 g/m² according to the type 

of formwork used. 

Packaging: 4.5 and 23 kg drums. 

213

214 



DMA 3000 

Chemical/physical action vegetable oilbased 

stripping compound in watery 

emulsion to improve natural finishes. 

Mapecure CA 

Paintable, film-forming, light-coloured 

acrylic curing agent in solvent for mortar 

and concrete. 

Mapecure E 

Anti-evaporation agent in water 

emulsion for protecting the surface of 

concrete against quickly drying out 

when exposed to sunlight and winds. 

Mapecure S 

Film-forming curing agent in solvent to 

protect mortar and concrete from drying 

out too quickly when exposed 

to sunlight and winds. 



Consumption: 15-25 g/m² according to the type 

of formwork used. 

Packaging: 4.5 and 23 kg drums. 






Application: spray. 

Consumption: 

– neat: 70-100 g/m²; 

– diluted: 1:1 with water: 140-200 g/m². 






NEW 

NEW 

NEW 

Mapeform Eco 31 

Chemical-action vegetable oil-based 


emulsion to improve exposed surfaces. 

Particularly suitable for use on vertical 

surfaces. Also suitable for steam curing 

cycles. 




emulsion to improve exposed surfaces. 

Particularly suitable for use on 

horizontal surfaces. Also suitable for 

steam curing cycles. 


NEW 

NEW 

NEW 


stripping compound in watery emulsion 

to improve exposed surfaces. Also 

suitable for steam curing cycles. 


Application: by spray with suitable spray system. 

Consumption: from 15 to 25 g/m² on metal or plastic 

formwork. 

Packaging: 23 kg cans. 




formwork. 

Packaging: 23 kg cans. 




formwork. 

Packaging: 4.5 and 23 kg cans. 

215

AGGREGATES AND MORTARS 

FOR THE BUILDING INDUSTRY

218 

27. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY 

27.1 Mortars for the building industry _________________________________________________________________ 

BEtonFLuid 

BEtonFLuid is a high-strength (Rck 

40 N/mm²), self-compacting concrete 

(SCC) made by VAGA, ideal for 

manufacturing all types of structural 

elements with a natural finish. 

BEtonFLuid is particularly suitable 

for casting into special formwork, 

including where there is a high density 

of reinforcement rods, without the risk 

of segregation. 

BIOstabilitura 

Highly compatible, ecological finishing 

which responds fully to the construction 

requirements of eco-friendly building 

work. 

Finishing mortar for walls, made entirely 

with high quality, NATURAL, transpirant, 

eco-compatible, raw materials. Suitable 

for rendering internal and external 

surfaces. 

CALCESTRUZZO 

Formulate with latest-generation 

admixtures, to cement any and all your 

ideas. 

Pre-dosed concrete for small 

jobs, structural casts and 

natural-finish elements, 

including in those places 

difficult to reach with conventional 

casting systems. 

FIBROmalta 

Special fibre-reinforced render for the 

best results with the minimum effort. 

Suitable for render and general wall 

coatings. The micro-fibres guarantee 

no crack formation caused by plastic 

shrinkage when drying out. It is suitable 

for application with a rendering machine 

and is even more attractive when 

applied by hand. 

MALTE 

PER INTONACI 

CS IV 

CONFORME ALLA NORMA 

EUROPEA EN 998-1 

MALTE 

PER MURATURA 

M5 



EN 

206-9 

EN 

206-1 

EN 998-1 

EN 998-2 

TECHNICAL DATA 

Characteristic strength: Rck40. 

Exposure class: XC4, XD3, XS3, XF1, XA1. 

Water/cement ratio: ≤ 0.45. 

Yield: 86x25 kg sacks per m³ of concrete. 



Mixing ratio: the product is supplied ready to use. 

If necessary, mix well before use. 

Coefficient of permeability to water vapour: μ = 9. 

Composition: Super-fine lime (type CL 90-S) and 

natural, fine silica sand (cat. 0/1 mm). 

Yield: approximately 2.0-3.0 kg per square metre 

per mm of thickness. 



Characteristic strength: Rck 37. 

Consistency class: S4 (fluid). 

Exposure class: XC4 - XS1 - XD2 - XF2 - XA1. 


Yield: 86x25 kg bags per m³ of concrete. 



Fire resistance: REI 180. 

Mixing ratio: 1 25 kg sack of FIBROmalta with 

approx. 3.5 litres of water. 

Mixing time: 3 minutes. 


Compressive strength after 28 days: ≥ 6 N/mm². 

Yield: 100 kg (4 bags) for approximately 6 m² per 

mm of thickness or approximately 4.5 m² of wall with 

12x12x24 cm bricks. 


FIBROstabilitura 

FIBROstabilitura is a transpirant 

finishing mortar for masonry suitable 

for internal and external biocompatible 

render without cracks or crazing. 

FIBROstabilitura is reinforced with fibres 

which guarantee that no shrinkage 

cracks or crazing form during drying, 

and has unrivalled workability. 

FIBROstabilitura is a highly ecological 

product which responds fully to the 

construction requirements of ecofriendly 

building work. 

Grassello di CALCE 

Aerial binder for transpirant, ecological 

finishing compounds and render. 

Aerial binder for preparing traditional 

masonry render and mortar on site, 

the main ingredient for making natural, 

transpirant paintwork, final smoothing 

coats on render (fresh on fresh) and for 

restoring ancient buildings. 

HR15 

For fire-resistant constructions with high 

structural characteristics. 

HR15 is a HIGH STRENGTH render 

RESISTANT TO FIRE. It Is particularly 

suitable for laying concrete and 

cement blocks and brickwork and 

is also suitable for rendering. It may 

be used for protecting and repairing 

concrete structures, in compliance 

with EN 1504-3. 

MALTE 

PER INTONACI 

CS IV 



MaltaBASTARDA 

The innovative formulate to make 

masonry and render quickly. 

Ready-mixed mortar with guaranteed 

performance figures for internal and 

external render, load-bearing and 

partition walls, sealing water pipes and/ 

or cable runs and for installing shower 

troughs and sanitary fittings. 

MALTE 

PER INTONACI 

CS IV 



MALTE 

PER MURATURA 

M15 



MALTE 

PER MURATURA 

M5 



EN 459-1 

CALCI DA 

COSTRUZIONE 

CL 90-S PL 



EN 998-1 

EN 998-2 

EN 1504-3 

EN 998-1 

EN 998-2 

TECHNICAL DATA 

Mixing ratio: supplied ready to use, may be mixed 

when first used if required. 

Coefficient of permeability to water vapour: μ = 9. 

Composition: slaked lime (type CL 90-S PL), fine 

natural silica sand (cat. 0/1 mm) and microfibres. 

Yield: approximately 2.0-3.0 kg per square metre per 




Mixing ratio: the product is supplied ready to use. If 

necessary, mix well before use. 

Composition: calcium hydroxide [Ca(OH)2]. 

Yield: approximately 1.5 kg per square metre per mm 

of thickness. 



Fire resistance: REI 180. 

Mixing ratio: 1 25 kg bag of HR 15 with approx. 

3.5 litres of water. 




Yield: 100 kg (4 bags) for approximately 5.5 m² per 

mm of thickness or approximately 5 m² of wall with 

20x20x40 cm cement blocks. 



Mixing ratio: 1 25 kg sack of MaltaBASTARDA with 

approximately 3.5 litres of water. 




Yield: 100 kg (4 bags) for approximately 6 m² per 

mm of thickness or approximately 4.5 m² of wall with 

12x12x24 cm bricks. 


219

220 


MaltaVISTA 

For highly attractive, natural finish 

resistant to the trials of time. 

Its special formulation makes 

MaltaVISTA suitable for structurallysolid, 

natural finish masonry, guarantees 

insulation against water ingress 

and reduces the phenomenon of 

efflorescence, while its high plasticity 

makes it possible to adjust the position 

of blocks and bricks when laying. 

SabbiaCEMENTO 

Formulate with special acrylic 

admixtures for any type of 

high-performance screed. 

Ready-mixed cementitious screed 

suitable for laying all types of bonded 

and floating screeds, including heated 

screeds. Set to foot traffic after 

approximately 16 hours, wait 36 hours 

before laying ceramic tiles and 14 days 

for parquet and resilient coverings. 

SAETTA 

When time is tight and quality is a must. 

SAETTA ultra high performance quick 

beton with a low shrinkage rate. The 

formulate complies with EN 206-1 

standards, “and allows the time required 

for building work to be considerably 

reduced, including structural work, 

thanks to a stripping being time of just 

2 hours!”. 

MISTA 

Selected, washed aggregates with 

the CE symbol, suitable for concrete, 

bitumen conglomerates and site mortar. 

Ideal for preparing beton on site 

for small building jobs and for all 

applications which require a blend of 

calibrated aggregates with a maximum 

diameter of 10 mm. 


Compressive strength: 

2 hours: ≥ 9.5 N/mm²; 

4 hours: ≥ 11.5 N/mm²; 

8 hours: ≥ 12.0 N/mm²; 

24 hours: ≥ 13.0 N/mm²; 

7 days: ≥ 30.0 N/mm²; 

4 hours: ≥ 40.0 N/mm². 

Consistency class: S5 (Super Fluid). 

Exposure class: XC1, XC2, XC3. 


Yield: 87x25 kg bags per m³ of concrete. 


27.2 Damp aggregates for the building industry ________________________________________________________ 

EN 998-2 

MALTE 

PER MURATURA 

M5 



EN 13813 

EN 140-8 

23dB 

CT 

MASSETTI 

CEMENTIZI 

C20-F4 


EUROPEA EN 13813 

A1fl 

EN 12620 

EN 13139 


Mixing ratio: 1 25 kg bag of MaltaVISTA with 

approximately 3 litres of water. 




Coefficient of capillary water absorption: ≤ 0.15 kg / 

(m² x min 0.5 ). 

Yield: 100 kg (4 bags) for approximately 2.5 m² of 

natural finish brickwork. 



Soundproofing against the noise of footsteps: 

ΔLw = 23 dB. 

Mixing ratio: 1 25 kg bag of sabbiaCEMENTO with 

approximately 1 litre of water. 

Mixing time: until completely blended. 


Compressive strength after 28 days: ≥ 20 N/mm² 

Flexural strength after 28 days: ≥ 4 N/mm². 

Yield: 100 kg (4 bags) for approximately 6 m² per mm 

of thickness, according to the level of tamping. 



Grain size: from 0.1 mm to 10.0 mm. 

Category: 0/8 mm according to EN 12620. 


Packaging: VAGA MISTA sand is available: 

– in 25 kg bags; 

– bulk; 

– in 1.5 t big bags.

TICINO 




Ideal for preparing finishing mortar 

and fine render on site. Also used in 

horticulture and in all those sectors and 

applications where the use of extra-fine 

natural sand is required. 

VAGLIATA 




Ideal for installation substrates for laying 

self-locking solid blocks, mixing mortar 

and rough or rustic-finish render on site, 

installing floor screeds on site and all 

applications which require graded sand 

with a maximum diameter of 4.0 mm. 

VG03S 

Ideal for sealing and filling joints when 

laying self-locking solid blocks, building 

sand for wood and bricks and removing 

the following from surfaces: smog, 

graffiti, dirt and carbonatation; mediumabrasion 

and depth sand-blasting to 

improve the bond of varnish, render, 

etc. to surfaces. 

VG15 

Ideal for sealing and filling joints 

when laying self-locking solid blocks, 

preparing smoothing and finishing 

compounds on site and for all those 

applications which require natural fine 

sand. 





Packaging: VAGA TICINO sand is available: 


– bulk; 

– in 1.5 t big bags. 





Packaging: VAGA VAGLIATA sand is available: 


– bulk; 


27.3 Dry aggregates for the building industry ___________________________________________________________ 

EN 12620 

EN 13139 

EN 12620 

EN 13139 

EN 13139 

EN 13139 


Humidity level: less than 0.5%. 



Packaging: VAGA VG03S sand is available: 


– bulk; 






Packaging: VAGA VG15 sand is available: 


– bulk; 


221

222 


VG16SS 


laying self-locking solid blocks, sandblasting 

metallic structures when rust 

and old surface treatments need to be 

removed, to create clean surfaces and 

improve the bond of paints. 

VG17FS 


laying self-locking solid blocks, sandblasting 

ironwork and highly abrasive, 

deep-down surface treatments to 

remove residues of tar, deteriorated 

concrete, etc. 

EN 13139 

EN 13139 





Packaging: VAGA VG16SS sand is available: 


– bulk; 






Packaging: VAGA VG17FS sand is available: 


– bulk; 

– in 1.5 t big bags.

223

Selection chart for 

Adhesives for ceramic tiles 

and stone material 


Grouts and Flexible Joints 

Guide to help Thin porcelain choose 

tiles 

Waterproofing Products 


Elastic Sealants and Adhesives 

Internal environments 

External environments 

Balconies and Terraces 

Bathrooms, Damp environments, 

Swimming-pools 

Underground structures

SELECTION CHARTS

226 

SELECTION CHARTS 

SYSTEMS FOR LAYING THIN PORCELAIN TILES 

LAYING ON CEMENTITIOUS SCREEDS OR EXISTING 

CERAMIC FLOORS IN INTERIORS 

(TILES WITH OR WITHOUT GLASS FIBRE REINFORCEMENT MESH) 

RECOMMENDED ADHESIVES 

NORMAL SETTING QUICK SETTING 

Size of tile Adhesive Class in compliance 

with EN 12004 

Adhesive Class in compliance 

with EN 12004 

< 5000 cm2 (the longest 

side must be no more 

than 100 cm) 

KERAFLEX MAXI S1 

ULTRALITE S1 

C2TES1 

C2TES1 

GRANIRAPID C2FS1 

> 5000 cm 2 

KERABOND + ISOLASTIC 

ULTRALITE S2 

C2ES2 ELASTORAPID C2FTES2 

LAYING ON HEATED FLOORS IN INTERIORS 





with EN 12004 


with EN 12004 



than 100 cm) 


C2ES2 

ELASTORAPID 

GRANIRAPID 

C2FTES2 

C2FS1 

> 5000 cm 

ULTRALITE S2 

2 

KERAQUICK + 

LATEX PLUS 

C2FTS1 

LAYING ON RENDERS, GYPSUM-BOARD AND FIBRE-CEMENT PANELS 

ON INTERNAL WALLS 





with EN 12004 


with EN 12004 



than 100 cm) 


ULTRALITE S1 

C2TES1 

C2TES1 

GRANIRAPID C2FS1 

> 5000 cm 2 


ULTRALITE S2 

C2ES2 ELASTORAPID C2FTES2 

LAYING ON INTERNAL WATERPROOFING SYSTEMS 

(SUCH AS MAPELASTIC OR MAPEGUM WPS) 




Size of tile 

< 5000 cm 


with EN 12004 


with EN 12004 

2 (the longest 

side must be no more KERAFLEX MAXI S1 C2TES1 

than 100 cm) 

> 5000 cm 

KERAQUICK + 

LATEX PLUS 

C2FTS2 

2 


ULTRALITE S2 

C2ES2

LAYING ON INTERNAL WORKTOPS, WOODEN FURNITURE, 

MARINE PLYWOOD AND METAL 




Size of tile 

< 5000 cm 


with EN 12004 


with EN 12004 

2 (the longest 


than 100 cm) 

> 5000 cm 

KERALASTIC 

KERALASTIC T 

R2 

R2T 

KERAQUICK + 

LATEX PLUS 

C2FTS2 

2 

LAYING ON CEMENTITIOUS RENDERS OR REINFORCED CONCRETE FAÇADES 

(TILES WITHOUT GLASS FIBRE REINFORCEMENT MESH) 




with EN 12004 


with EN 12004 



than 100 cm) 


ULTRALITE S1 

C2TES1 

C2TES1 

ELASTORAPID C2FTES2 

> 5000 cm 2 


ULTRALITE S2 

C2ES2 

KERAQUICK + 

LATEX PLUS 

The laying indications in this table are to be considered merely for indication purposes and for normal applications and conditions. For further information, please refer to the relative Technical Data Sheets. Definition of 

the most suitable laying system is highly dependent on specific site conditions and the format of the tiles. For special cases, please consult the Mapei Technical Assistance Department or relative technical notebooks. 

C2FTS2 

LAYING ON CEMENTITIOUS RENDERS OR REINFORCED CONCRETE FAÇADES 

(TILES WITH GLASS FIBRE REINFORCEMENT MESH) 




with EN 12004 


with EN 12004 



than 100 cm) 


ULTRALITE S2 

C2ES2 

KERAQUICK + 

LATEX PLUS 

C2FTS2 

> 5000 cm2 KERALASTIC T R2T 

227

228 


LAYING CERAMIC TILES, MOSAICS AND STONE MATERIAL IN INTERIORS 

SUBSTRATES Glass and ceramic 

mosaics 

FLOORS 

Cementitious screeds 

or special binder screeds 

Concrete floor slabs and floors 

Anhydrite screeds 

Heated screeds 

Old ceramic, terrazzo and natural 

stone floors 

≈ Rapid solution 

ADESILEX P10 

KERAQUICK ≈ 

ADESILEX P10+ISOLASTIC 50% 

GRANIRAPID ≈ 

ADESILEX P10 (with PRIMER G) 

KERAQUICK ≈ (with PRIMER G) 





CERAMIC TILES AND MOSAICS 

Single-fired, cotto and 

double-fired 

KERABOND 

ADESILEX P9 

KERAQUICK ≈ 

KERAFLEX EASY 

KERAQUICK ≈ 

KERAFLEX EASY (with PRIMER G) 


ADESILEX P9 

KERAFLEX EASY 

KERAQUICK ≈ 

ADESILEX P9 

KERAFLEX EASY 

KERAQUICK ≈ 

TYPE OF 

Porcelain tiles and clinker 

ADESILEX P9 

KERAFLEX EASY 


KERAFLEX EASY 

ULTRALITE S1/KERAFLEX MAXI S1 



GRANIRAPID ≈ (with PRIMER G) 

KERAFLEX EASY 



KERAFLEX EASY 



Marine plywood ELASTORAPID ≈ ELASTORAPID ≈ ELASTORAPID ≈ 

Chipboard KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS 

Old PVC, rubber and 

linoleum floors 

KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS ≈ 

KERAQUICK+LATEX PLUS 

KERALASTIC 

KERAPOXY ADHESIVE 

Metal surfaces KERALASTIC KERALASTIC KERALASTIC 

Surfaces waterproofed with 

MAPEGUM WPS or MAPELASTIC 



KERAFLEX EASY 




ELASTORAPID ≈

COATING MATERIAL 

Not sensitive to staining 

Class A stone material 

KERAFLEX EASY 

KERAQUICK ≈ 

KERAFLEX EASY 







KERAFLEX EASY 



STONE MATERIAL 

Sensitive to staining 

Class B** or Class A 

stone material 

KERAQUICK ≈ 


KERAQUICK ≈ 




KERAQUICK ≈ 

GRANIRAPID 

KERAQUICK ≈ 


Class C*** 


KERALASTIC 


KERALASTIC 


KERALASTIC 


KERALASTIC 


KERALASTIC 


ELASTORAPID ≈ KERAQUICK+LATEX PLUS ≈ KERALASTIC 

KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS ≈ KERALASTIC 

KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS ≈ KERALASTIC 

KERALASTIC 




KERALASTIC 



ELASTORAPID ≈ 

KERALASTIC 


KERALASTIC 



229

230 


LAYING CERAMIC TILES, MOSAICS AND STONE MATERIAL IN INTERIORS 


mosaics 

WALLS 

Cementitious render or mortar 

Concrete 

Cellular concrete blocks and 

breeze blocks (with PRIMER G) 

Gypsum smoothing compounds 

and renders 

Plasterboard 


ADESILEX P10 

KERAQUICK ≈ 



ADESILEX P10 

KERAQUICK ≈ 


ULTRAMASTIC III 


ADESILEX P10 


KERAQUICK ≈ 



double-fired 

TIXOBOND WHITE/KERABOND 

ADESILEX P9 

KERAQUICK ≈ 

KERAFLEX 


KERABOND 

ADESILEX P9 

KERAQUICK ≈ 

ULTRAMASTIC 5 


(with PRIMER G) 


ADESILEX P22 


ADESILEX P9 

KERAQUICK ≈ 

ADESILEX P22 

TYPE OF 


ADESILEX P9 

KERAFLEX 

KERAQUICK ≈ 



ADESILEX P9 

KERAFLEX 

KERAQUICK ≈ 

ULTRAMASTIC 5 

KERAFLEX (with PRIMER G) 



ADESILEX P9 

KERAQUICK ≈ 


Chipboard KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS ≈ 

Cement-fibre panels 

ADESILEX P10 

KERAQUICK ≈ 


ADESILEX P9 

KERAQUICK ≈ 

ADESILEX P9 

KERAFLEX 

KERAQUICK ≈ 

Metal surfaces KERALASTIC T KERALASTIC T KERALASTIC T 


MAPEGUM WPS or MAPELASTIC 



KERAFLEX 



KERAFLEX 


ELASTORAPID ≈




KERAFLEX 

KERAQUICK ≈ 

KERAFLEX 



KERAFLEX 

KERAQUICK ≈ 

KERAFLEX (with PRIMER G) 


KERAFLEX 

KERAQUICK ≈ 





KERAQUICK ≈ 


KERAQUICK ≈ 


KERAQUICK ≈ 




KERAQUICK ≈ 


Class C*** 


KERALASTIC T 


KERALASTIC T 


KERALASTIC T 


KERALASTIC T 


KERALASTIC T 


KERAQUICK+LATEX PLUS ≈ KERAQUICK+LATEX PLUS ≈ KERALASTIC T 

KERAFLEX 

KERAQUICK ≈ 

KERAQUICK ≈ 


KERALASTIC T 

KERALASTIC T KERALASTIC T KERALASTIC T 

KERAFLEX 



KERAQUICK ≈ 


KERALASTIC T 




231

232 


LAYING CERAMIC TILES, MOSAICS AND STONE MATERIAL IN EXTERIORS 


mosaics 

FLOORS 

Cementitious screeds or 

special binder screeds 

Surfaces waterproofed 

with MAPELASTIC 

Concrete 

WALLS and FAÇADES 

Cementitious render 

or concrete 

SWIMMING-POOLS, BASINS, etc. 

Cementitious screeds, 

special binder screeds 

and cemetitious renders 

Concrete 


MAPELASTIC 











KERACRETE+KERACRETE POWDER 











double-fired 

KERAFLEX EASY 









- 

- 

- 

TYPE OF 


KERAFLEX EASY 





KERABOND+ISOLASTIC 

ULTRALITE S2 


KERAQUICK+LATEX PLUS ≈ 



ULTRALITE S2 




ELASTORAPID 






ELASTORAPID ≈











ULTRALITE S2 














Class C*** 


KERALASTIC T 


KERALASTIC T 


KERALASTIC T 


KERALASTIC T 



ELASTORAPID ≈ - - 







233

234 


GROUTS AND FLEXIBLE JOINTS 

CEMENTITIOUS 

GROUTS 

EPOXY GROUTS 

READY-TO-USE 

PASTE 

PRODUCTS 

PRODUCTS FOR 

LAYING PORPHYRY 

AND ROUGH-CUT 

STONE 

FLEXIBLE 

JOINTS 

= fit for use • = particularly recommended by Mapei * = with FUGOLASTIC 

Mosaic 

Cotto 

TYPE OF COATING MATERIAL 

ULTRACOLOR PLUS 

(joints from 2 to 20 mm) 

• • 

KERACOLOR SF 

(joints up to 4 mm) 

 

KERACOLOR FF 

(joints up to 6 mm) 

 

KERACOLOR GG 

(joints from 4 to 15 mm) 

 

KERAPOXY 

(joints of at least 3 mm) 

 

KERAPOXY DESIGN 

(joints from 2 to 7 mm) • 

KERAPOXY P 

KERAPOXY CQ 

KERAPOXY IEG 

KERAPOXY SP 

Ceramic tiles 

Stone 

Decorative elements 

in lightweight 

cementitious 

conglomerate 

FLEXCOLOR 

FIX & GROUT BRICK • 

KERACOLOR PPN • 

MAPESTONE PFS • 

MAPESTONE PFS PCC2 • 

MAPESIL AC • • 

MAPESIL LM • • • 

MAPEFLEX PU21 





MAPEFLEX PU50SL • 

Porphyry and roughcut 

stone

Residential 

environments 

Bathrooms and 

kitchens 

Balconies and 

terraces 

Swimming pools 

Saunas and 

Turkish baths 

Supermarkets 

WHERE TO USE 

• • • • • • • • 

* * * 

* * * 

* * * - • * - • * * 

• • • • 

• • • • 

 

 

 

 

• 

• 

• 

• 

• 

• 

Public buildings 

• 

 

• • • 

• • • • 

• • • • 

• • • • 

• • 

 

• • • • 

 

 

 

• • • 

Façade coatings 

Foodstuffs industries 

Meat factories 

and oil mills 

• 

• 

Footpaths and 

courtyards 

Roads and squares 

with limited traffic 

Roads and squares 

for vehicles 

235

236 


MAPEI MORTARS FOR REPAIRING CONCRETE 

Mapegrout 

Thixotropic 

Mapegrout T40 

Mapegrout T60 

Normal-setting thixotropic mortars 

Type of repair 

Repair of concrete layer around reinforcement rods 

Structural repair 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

Classification according to EN 1504-3 Standards R4 R3 R4 R4 R4 R4 R4 R3 

Application 

Civil 

construction 

Industrial 

construction 

Infrastructure 

Bridges and viaducts 

Hydraulic construction 

Highway 

maintenance 

Trowel/flat trowel 

Continuous-mix rendering machine 

• • • • • • • • 

Rendering machine with pre-mixing unit 

By casting 

• • • • • • • 

Repairs to the corners of beams and columns • • • • • 

Repairs to the edges of balconies • • • • • 

Repairs to ceilings • • • • • 

Repairs to gutters • • • • • 

Repairs to parapets • • • • • 

Fixing columns in place 

Repairs to buffer panels • • • • • 

Repairs to floors • 

Repairs to beams and columns 

Fixing machinery in place 

• • • • • 

Repairs to piles • • • • • • • 

Repairs to beams • • • • • • • 

Repairs to the face of internal floor slabs • • • • • • • 

Repairs to the face of external floor slabs • • • • • • 

Repairs to pulvinoes • • • • • • • 

Repairs to reinforced concrete bearing elements • • • • • • 

Repairs to kerbs • • • • • 

Repairs to joints in motorways • 

Repairs to walls • • • • • • 

Repairs to plateaus • • • • • 

Repairs to joints • • • • • 

Repairs to upstream faces • • • • • 

Repairs to downstream faces • • • • • 

Repairs to overflow channels • • • • • 

Fixing inspection shafts, manholes 

and urban fittings in place 

Mapegrout FMR 

+ Fibres FF 

Mapegrout 

Easy Flow 

Mapegrout 

Easy Flow GF 

Mapegrout BM 

Mapegrout LM2K

Mapegrout 430 

Mapegrout 

Fast-Set 

Rapid-setting thixotropic mortars Normal-setting castable mortars Rapid-setting castable mortars Cementitious binders 

Planitop 400 


Planitop 

Smooth & Repair 

Mapegrout 

Hi-Flow 

Mapegrout 

Hi-Flow GF 

Mapegrout 

Hi-Flow TI 20 

+ Fibres R60 

Mapegrout SV 

Mapegrout 

SV Fiber 

+ Fibres R38 

• • • • • • • • • • • 

• • • • • • • 

R3 R3 R3 R4 R2 R4 R4 R4 R4 R4 / / 

• 

• 

• 

• • • • 

• • • • • • • 

• • • • 

• • • • 

• • 

• • 

• • 

• • • • 

• • • 

• • 

• • • • • 

• • • • • 

• • 

• • 

• • 

• • • • • • • 

• • • • • • • 

• • • • • 

• • • • • 

• 

• • • • • • • 

• • • • • • 

Stabilcem 

Stabilcem SCC 

237

238 


MAPEI MORTARS FOR SMOOTHING AND LEVELLING CONCRETE 

Type 

Application 

Where to use 

Planitop 100 

Normal setting • • 

Rapid setting • • 

Classification 

EN 1504-2 

Principles MC and IR 

Planitop 200 

EN 1504-2 


EN 998-1 

Planitop 207 

EN 1504-2 


EN 998-1 


EN 1504-2 


EN 998-1 

Trowel/flat trowel • • • • 

Roller/brush 

Natural finish • • • 

Flexible finishing and smoothing layer 

Smoothing out surface defects • • • • 

Localised repairs • • • • 

Abrasion resistance 

Protection against aggressive agents 

Suitable for the laying of ceramic • • •

Monofinish 

Mapefinish 

Planitop 

Smooth & Repair 

• • • • 

EN 1504-2 


EN 1504-3 (R2) 

EN 1504-2 


EN 1504-3 (R2) 

• 

EN 1504-2 


EN 1504-3 (R2) 

Mapelastic 

EN 1504-2 

Principles PI, MC and IR 

• • • • 

• • • 

Mapelastic 

Smart 

EN 1504-2 

Principles PI, MC and IR 

• • • 

• • 

• • 

• 

• • • 

• 

• • 

239

240 


BONDING AND SEALING 

sealing 

external use 

internal use 

bonding 

depuration plants 

production areas 

storage tanks 

safety basins 

channels 

airports 

road joints 

car parks 

terraces and floor slabs 

tiled surfaces 

external courtyards 

swimming pools 

cracks and splits 

fillets between different materials 

roofs and coverings 

metalwork 

ventilated façades 

façade joints 

refractory grout 

high temperatures joints 

fire-break joints 

fillets for glass/window and door wares 

fillets for window and door wares/wall encasements 

structural joints 

cracks and splits 

joints in industrial floors 

joints in civil floors 

fillets for sinks/kitchen worktops 

fillets for walls/kitchen worktops 

fillets for stone tiles 

fillets between tiles 

fillets for sanitary wares 

fillets for glass/window and door wares 

fillets for window and door wares/wall encasements 

fillets for roller blind/wall encasements 

stairway coatings 

kitchen worktops 

decorative panels 

insulating panels 

decorative profiles and ceiling roses 

window sills and parapets 

base-boards and doorsteps 

signposts 

bird deterrents 

bathroom accessories 

tiles 

beading 

cable runs 

skirting boards 

• • 

• • 

• • 

• 

• 

• • 

• • 

* = Ultrabond Super Grip is a product for internal use only • = Ideal = Suggested 

Mapesil Z 

1-component 

acetic silicone sealants 

Mapesil Z Plus 

Mapesil AC 

 

• 

• 

Mapesil 300°C 

 

• 

Mapeflex AC4 

• • 

 

• • 

 

• 

Mapeflex AC-P 

1-component 

acrylic sealants 

Mapeflex AC-PRO 

 

Mapeflex AC-FR 

• 

Ultrabond Super Grip* 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

•

1-component 

sealants of other 

formulations 

Mapeflex Firestop 

1200°C 

• 

• 

Mapeflex Blackfill 

Mapeflex PU40 

1-component 

polyurethane sealants 

Mapeflex PU45 


2-component 

epoxy-polyurethane sealants 

Mapeflex PU21 

Mapeflex PU20 

• • 

• • 

Mapeflex PU30 

2-component 

modified polyurethane sealants 

• • • • 

• • • • 

 

• • 

• • 

• • 

• • • 

• • 

• • 

• • • 

• • • • 

• 

• • • • 

 

• • • • 

• • 

• 

• 

• 

• 

• • 

• • • 

• • 

• • 

• • • 

 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • 

• • • 

 

Mapeflex PB27 

Mapeflex PB25 

Mapeflex PU65 

• 

1-component neutral 

silicone sealants 

Mapesil BM 

Mapesil LM 

1-component 

hybrid 

sealants 

Mapeflex MS45 

241

242 


WATERPROOFING 

* = Strati impermeabilizzanti da lasciare a vista 

Horizontal and 

vertical surfaces 

BATHROOMS and DAMP ENVIRONMENTS 

Mapelastic • 

Mapelastic Smart • 

Mapelastic AquaDefense • 

Mapegum WPS • 

Monolastic • 

Mapeband • • • 

Mapeband PE 120 • • • 

Drain Lateral • 

Drain Vertical 

SWIMMING POOLS 

• 



Mapeproof Swell • 

Mapeband • • 

Mapeband TPE • 

Drain Vertical 

BALCONIES and TERRACES 

• 



Mapelastic AquaDefense • 

Monolastic • 

Aquaflex Roof • 

Mapenet 150 • 

Mapetex Sel • 



Mapeproof Swell • 

Drain Lateral • 

Drain Vertical • 

Drain Front • 

Fillets 

Joints 

Cross-members 

Drains

• After carrying out the render with Planitop HDM Maxi. 

Plateau 

Post-cast walls 

Pre-cast walls 

Reinforced concrete 

walls with negative lift 

Brick walls with 

negative lift 

UNDERGROUND STRUCTURES 

Mapeproof • • • • • 

Mapeproof LW • • • • • 

Mapeproof Mastic • • 

Mapeproof Swell • • • • 

Idrostop • • • 

Idrostop B25 • • • • 



Idrostop PVC BI-BE • 

Idrosilex • 

Idrosilex Pronto • • • • 

Mapelastic Foundation • • • • 

Lamposilex • • • • 

Resfoam 1KM • • • • 

Plastimul • 

Plastimul 1K Super Plus • 

Plastimul 2K Plus • 

Plastimul 2K Super • 

Lift shaft 

Pile heads 

Structural joint 

Construction joint 

Through bodies 

243

Mapei Group 

Europe 

AUSTRIA - Mapei GmbH 

Fräuleinmühle 2 

A - 3134 Nußdorf ob der Traisen 

Tel. +43-2783-8891 - Fax +43-2783-8893 

Internet: http://www.mapei.at 

E-mail: office@mapei.at 

Plant in Nußdorf ob der Traisen 

Distribution centres in Wien, 

Hall in Tirol and Graz 

BELGIUM - LUXEMBOURG 

Mapei Benelux SA/NV 

Zoning Industriel - Rue de l’Avenir, 40 

B - 4460 Grâce-Hollogne 

Tel. +32-4-2397070 - Fax +32-4-2397071 

Internet: http://www.mapei.be 

E-mail: mapei@mapei.be 

BULGARIA 

Mapei Bulgaria LTD 

Business Park Mladost 4 

Building 8A, floor 6 - 1766 Sofia, Bulgaria 

Tel. +359 (2) 4899775 - Fax +359 (2) 4898723 

Internet: http://www.mapei.bg 

Plant in Ruse 

CROATIA - Mapei Croatia d.o.o. 

Purgarija 14 - Kerestinec 

10431 Sveta Nedelja 

Tel. +385-1-3647789 - Fax +385-1-3647787 

Internet: http://www.mapei.hr 

E-mail: mapei@mapei.hr 

CZECH REPUBLIC 

Mapei spol. s r.o. 

Smetanova 192 - 77211 Olomouc 

Tel. +420-585224580 

Fax +420-585227209 

Internet: http://www.mapei.cz 

E-mail: info@mapei.cz 

Distribution centre in Prague 

DENMARK - Mapei Denmark A/S 

Falkoner Allé 7,4 

2000 Fredriksberg 

Tel. +45-69 60 74 80 

Fax +45-69 60 74 89 

Internet: http://www.mapei.dk 

E-mail: post@mapei.dk 

FRANCE - Mapei France SA 

Zone Industrielle du Terroir 

Avenue Léon Jouhaux, 29 

31140 Saint Alban 

Tel. +33-5-61357305 

Fax +33-5-61357314 

Internet: http://www.mapei.fr 

E-mail: mapei@mapei.fr 

Plants in Saint Alban and Montgru 

Saint Hilaire 

GERMANY - Mapei GmbH 

Bahnhofsplatz 10 - 63906 Erlenbach 

Tel. +49-9372-98950 

Fax +49-9372-989548 

Internet: http://www.mapei.de 

E-mail: mailto@mapei.de 

Plant in Weferlingen 

GREAT BRITAIN - Mapei U.K. Ltd 

Mapei House - Steel Park Road - 

Halesowen - West Midlands B62 8HD 

Tel. +44-121-5086970 

Fax +44-121-5086960 

Internet: http://www.mapei.co.uk 

E-mail: sales@mapei.co.uk 

Plant in Halesowen 

GREECE - Mapei Hellas SA 

P.O. Box 19243 - 34100 Chalkida 

Tel. +30-22620-71906 

Fax +30-22620-71907 

Internet: http://www.mapei.gr 

E-mail: mapeihellas@mapei.gr 

Plant in Ritsona 

HUNGARY - Mapei Kft 

Sport utca 2. - 2040 Budaörs 

Tel. +36-23-501667 - Fax +36-23-501666 

Internet: http://www.mapei.hu 

E-mail: mapei@mapei.hu 

Plant in Sóskút 

NORWAY - Mapei AS 

Vallsetvegen 6 - 2120 Sagstua 

Tel. +47-62-972000 - Fax +47-62-972099 

Internet: http://www.mapei.no 

E-mail: post@mapei.no 

Plant in Sagstua 

POLAND - Mapei Polska Sp.z o.o. 

ul. Gustawa Eiffel’a 14, 

44-109 Gliwice 

Tel. +48-32-7754450 - Fax +48-32-7754471 

Sales office: 

ul. Chałubińskiego 8, 

00-613 Warszawa 

Tel. +48-22-5954200 - Fax +48-22-5954202 

Internet: http://www.mapei.pl 

E-mail: info@mapei.pl 

Plant in Gliwice 

PORTUGAL - Lusomapei S.A. 

Business Parque Tejo XXI 

Estrada Nacional 1 - Km 29, Gelfas 

2600-659 Castanheira do Ribatejo 

Tel. +351 263 860 360 

Fax +351 263 860 369 

Internet: http://www.mapei.pt 

E-mail: geral@mapei.pt 

Plant in Anadia 

ROMANIA - Mapei Romania SRL 

14 Gen. Ion Dragalina Str. 

Sector 5 - Bucarest 

Tel. +40-21-3117819 

Fax +40-21-3117821 

Internet: http://www.mapei.ro 

E-mail: info@mapei.ro 

RUSSIAN FEDERATION - ZAO Mapei 

Derbenevskaya nab., 7, building 4, 3-d floor 

Moscow 115114 Russian Federation 

Tel. +7-495-258-5520 - Fax +7-495-258-5521 

Internet: http://www.mapei.ru 

E-mail: info@mapei.ru 

Plant in Stupino 

SLOVAK REPUBLIC - Mapei SK sro 

Nádražná 39, 900 28 Ivanka pri Dunaji 

Tel. +421-2-4020 4511 

Fax +421-2-4020 4523 

Internet: http://www.mapei.sk 

E-mail: office@mapei.sk 

SLOVENIA - Mapei doo 

Kočevarjeva 2 - 8000 Novo Mesto 

Tel. +386-1-7865050/51 

Fax +386-1-7865055 

Internet: http://www.mapei.si 

E-mail: mapei@mapei.si 

Distribution centre in Grosuplje 

Representative office in 

Serbia (Belgrado): 

Tel. +381-11-3474-694 

Fax +381-11-3474-695 

SPAIN - Ibermapei SA 

Plaza Cataluña, 20 - 5 a Planta 

08002 Barcelona 

Tel. +34-93-3435050 

Fax +34-93-3024229 

Internet: http://www.mapei.es 

E-mail: ibermapei@ibermapei.es 

Plants in Amposta (Tarragona) and 

Cabanillas del Campo (Guadalajara) 

Distribution centres in Badalona 

(Barcelona), Onda (Castellón) and 

Marratxi (Mallorca) 

SWEDEN - Mapei AB 

Smidesvägen 10, 6 tr. 

17141 Solna 

Tel. +46-8-52509080 

Internet: http://www.mapei.se 

E-mail: info@mapei.se 

SWITZERLAND - Mapei Suisse SA 

1642 Sorens / FR 

Tel. +41-26-9159000 

Fax +41-26-9159003 

Internet: http://www.mapei.ch 

E-mail: info@mapei.ch 

Plant in Sorens 

THE NETHERLANDS 

Mapei Nederland B.V. 

Twentepoort Oost 27 

7609 RG Almelo 

Tel. +31-546-836040 

Fax +31-546-836044 

Internet: http://www.mapei.nl 

E-mail: verkoop@mapei.nl 

UKRAINE - Mapei Ukraine LLC 

02002, Kiev 

13. M. Raskovoy, 5 th floor 

Tel. +38-044-221-15-01, 221-15-02 

Fax +38-044-393-14-52 

Internet: http://www.mapei.ua 

E-mail: office@mapei.ua 

Distribution centres in Zazimje village, 6, 

Radgospana str.

HEAD OFFICE 

MAPEI SpA 

Via Cafiero, 22 

20158 Milan (Italy) 

Tel. +39-02-37673.1 

Fax +39-02-37673.214 

http://www.mapei.com 

E-mail: mapei@mapei.it 

Asia-Oceania 

AUSTRALIA - Mapei Australia Pty Ltd 

12 Parkview Drive Archerfield 

Brisbane - Queensland 4108 

Tel. +61-7-3276 5000 

Fax +61-7-3276 5076 

Internet: http://www.mapei.com.au 

E-mail: sales@mapei.com.au 

Plant in Brisbane 

CHINA - Mapei Construction Materials 

(Guangzhou) co. Ltd. 

Contact address: Room 2003-4, 

Hong Fu Loi International Building, 

No. 313, Yan Jiang Zhong Road, 

Guangzhou, China 510110 

Tel. (86-20) 8365 3489 

Fax (86-20) 8365 3481 

Internet: http://www.mapei.com.cn 

Email: mapei-gz@mapei.com.cn 

Plant in Conghua (Guangzhou) 

CHINA - Mapei Construction Materials 

(Shanghai) co. Ltd. 

No. 6, Lane 8999, Hunan Road, 

Pudong New District, 

Shanghai, China 201314 

Tel. (86-21) 5818 0808 

Fax (86-21) 5818 0909 

Internet: http://www.mapei.com.cn 

E-mail: mapei-sh@mapei.com.cn 

Plant in Pudong New District (Shanghai) 

HONG KONG S.A.R. 

Mapei China Ltd 

9/F, Linkchart Centre, 2 Tai Yip Street, 

Kwun Tong, Kowloon, Hong Kong 

Tel. +852-21486816 

Fax +852-25121328 

Internet: http://www.mapei.com.hk 

E-mail: mapei@mapei.com.hk 

INDIA - Mapei Construction Products 

India Private Limited 

# 402, 3rd Floor, Tudor Court 

No. 40, Lavelle Road, Bengaluru - 560 001 

Tel. +91 80 2222 1820, 2222 1840 

Fax +91 80 2222 1810 

Internet: www.mapei.com 

E-mail: m.sarkar@mapei.co.in 

KOREA - Mapei Korea Ltd. 

121-270, 14th floor, Hansol Gyoyuk Bldg, 

Iaan Sangam 2 danji 

1653 Sangam-dong, Mapo-gu, Seoul 

Tel. +82-2-6393-2300 

Fax. +82-2-6393-2323 

Internet: http://www.mapei.co.kr 

E-mail: joon.lee@mapei.co.kr 

Plant in Jincheon (Chungcheongbuk-do) 

MALAYSIA 

Mapei Malaysia Sdn Bhd 

PT521, Batu 23 

Jln Rawang/Jln Batang Berjuntai 

48000 Rawang - Selangor Darul Ehsan 

Tel. +603-60935799 

Fax +603-60915801 

Internet: http://www.mapei.com.my 

E-mail: mapei@mapei.com.my 

Plant in Rawang (Selangor Darul Ehsan) 

PLANTS 

• Strada Provinciale 159 - 

20060 Robbiano di Mediglia (Milan) 

Tel. +39-02-906911 - Fax +39-02-90660575 

• Via Mediana S.S. 148 km 81,3 - 04100 Latina 

Tel. +39-0773-2548 - Fax +39-0773-250391 

DISTRIBUTION CENTRE 

SASSUOLO 

Via Valle D’Aosta, 46 - 41049 Sassuolo (Modena) 

Tel. +39-0536-803116 - Fax +39-0536-805255 

Africa 

NEW ZEALAND - Mapei New Zealand 

30 Fisher Crescent - Mt. Wellington 

Auckland, New Zealand 

Tel. +64-9-9211994 

Fax +64-9-9211993 

Internet: http://www.mapei.co.nz 

E-mail: enquiries@mapei.co.nz 

SINGAPORE - Mapei Far East Pte Ltd 

28, Tuas West Road 

Singapore 638383 

Tel. +65-68623488 

Fax +65-68621012 / 68621013 

Internet: http://www.mapei.com.sg 

E-mail: mapei@mapei.com.sg 

Plant in Singapore 

UNITED ARAB EMIRATES 

I.B.S. (Innovative Building Solutions) L.L.C. 

Unit 15B - Al Serkal Warehouse 

8th Street, Al Quoz Industrial 1, Dubai 

P.O. Box 73869, Dubai, UAE 

Tel. +971-04-3233167 

Fax +971-04-3233725 

Internet: http://www.ibs-mapei.ae 

E-mail: ibs-mapei.ae 

Plant in Dubai 

VIETNAM - Mapei Vietnam Ltd. 

Plot 8, Street No. 4, 

Northern Part of Chu Lai I.Z. 

Tam Hiep Commune, Nui Thanh District, 

Quang Nam Province - Vietnam 

Tel. (84-510) 3565 801-7 

Fax (84-510) 3565 800 

Internet: http://www.mapei.vn 

E-mail: mapeihn@mapei.com.vn 

Branch in Hanoi Capital: 

Tel. (84-4) 3928 7924-6 

Fax (84-4) 3824 8645 

E-mail: mapeihn@mapei.com.vn 

Branch in Danang City: 

Tel. (84-511) 3565 001-4 

Fax (84-511) 3562 976 

E-mail: mapeidn@mapei.com.vn 

Branch in Ho Chi Minh City: 

Tel. (84-8) 3512 1045 or 3899 2845 

Fax (84-8) 3899 2842 

E-mail: mapeihcm@mapei.com.vn 

Plant in Chu Lai (Quang Nam Province) 

SOUTH-AFRICA 

Mapei South Africa (Pty) Ltd 

Unit 2C, Anchor Industrial Park 

C/o Springbok and Taljaard Road 

Bartlett, Johannesburg, South Africa 

Tel. +27-11-5528476 

Fax +27-11-5528449 

Internet: http://www.mapei.co.za 

E-mail: info@mapei.co.za 

Office in Rome 

Viale Libano, 28 - 00144 Rome 

Tel. +39-06-5929211 - Fax +39-06-59290337 

Office in Lecce 

Via Adriatica, 2 B (angolo viale Porta d’Europa) 

73100 Lecce 

Tel. +39-0832-246551 - Fax +39-0832-248472 

E-mail: ufficio.lecce@mapei.it 

The Americas 

ARGENTINA - Mapei Argentina SA 

Rondeau 51, 1° floor, Wilde 

Buenos Aires 

Tel. +54-11-42070009 

Fax +54-11-42171088 

Internet: http://www.mapei.com.ar 

Plant in Buenos Aires 

CANADA - Mapei Canada Inc. 

2900 Francis-Hughes Avenue 

Laval, QC H7L 3J5 

Tel. +1-450-662-1212 

Fax +1-450-662-0444 

Internet: http://www.mapei.com 

Plant in Vancouver (BC), Laval (QC), 

Maskinongé (QC), Brampton (ON) 

Distribution centre in Calgary (AB) 

MESSICO 

Mapei de Mexico, S.A. DE C.V. 

Pirineos 515, Bodega 45 

Microparque Santiago 

Zona Ind. Benito Juarez 

Queretaro, Qro. CP 76128 

Tel. 0-1-800-696-2734 

Fax (442) 209-5024 


E-mail: rashjr@mapei.com 

PANAMA - Mapei Construction 

Chemicals Panama S.A. 

Via Transistmica, Complejo 

Bodegas America - Panama City 

Tel./Fax +507 261 9549-50 


E-mail: mapeipanama@mapei.com.pa 

PUERTO RICO - Mapei Caribe Inc. 

Road 2 km 26.2 BO. Espinosa 

Dorado, Puerto Rico 00646 

Tel. (787) 270-4162 

Fax (787) 883-1669 


Plant in Dorado 

U.S.A. - Mapei Corporation 

1144 East Newport Center Drive 

Deerfield Beach, Florida 33442 

Tel. +1-954-246-8888 / +1-888-300-4422 

Fax +1-954-246-8800 


Plants in Tempe (AZ), Garland (TX), 

South River (NJ), Fort Lauderdale (FL), 

West Chicago (IL), Fredericksburg (VA), 

San Bernardino (CA), Dalton (GA) 

VENEZUELA 

Mapei de Venezuela CA 

Calle Orinoco Torre D&D PB Lc 11-12 

Urb. Las Mercedes - 1071 Caracas 

Tel. +58-212-991-1797/+58-212-991-9423 

Fax +58-212-991-7623 


E-mail: mapeivenezuela@hotmail.com 

Plant in Caracas

246

NOTES 

247

248

NOTES 

249

250 

NOTES

HEAD OFFICE 

MAPEI S.p.A. 

Via Cafiero, 22 - 20158 Milan 

Tel. +39-02-37673.1 

Fax +39-02-37673.214 

Internet: www.mapei.com 

E-mail: mapei@mapei.it 

C.P. MK 670030 - (GB) 1/2012

GENERAL CATALOGUE - Mapei

Create successful ePaper yourself

Delete template?

Save as template?