GENERAL CATALOGUE - Mapei

Primer M
One-component, solvent-free primer
for polyurethane sealants, for use on
absorbent and non-absorbent surfaces.
Primer MF
Two-component, solvent-free epoxy
primer used as bonding promoter for
products from the MAPEFLOOR range,
for consolidating and waterproofing
against residual damp on cementitious
substrates and as anti-dust impregnator
on concrete floors.
Primer MF EC Plus
Two-component, solvent-free, lowviscosity,
epoxy primer with a very
low emission level of volatile organic
compounds for consolidating and
waterproofing cementitious substrates.
Primer P
One-component primer for sealants
applied on plastics.
TECHNICAL DATA:
Consistency: liquid.
Colour: transparent.
Inflammable: no.
Application temperature: from +5°C to +35°C.
Drying time: 40 minutes.
Storage: 12 months.
Application: brush.
Consumption: 1.5-2 g/m (for a 1 cm deep joint).
Packaging: 250 g bottles.
TECHNICAL DATA:
Consistency: liquid.
Colour: transparent yellow.
Mixing ratio: comp. A : comp. B = 3 : 1.
Waiting time before laying floors or applying
smoothing compound: 24-48 hours according to
the surrounding temperature.
Workability time: 90 minutes.
Storage: 24 months.
Application: brush.
Consumption: 0.20-0.30 kg/m².
Packaging: 1 kg (A+B) and 6 kg (A+B) units.
TECHNICAL DATA:
Consistency: liquid.
Colour: transparent yellow.
Mixing ratio: comp. A : comp. B = 4 : 1.
Waiting time before laying floors or applying
smoothing compound: 24 hours.
Workability time: 40 minutes.
EMICODE: EC1 R Plus - very low emission.
Storage: 24 months.
Application: roller, brush or flat trowel.
Consumption: 0.2-0.3 kg/m² per coat.
Packaging: 5 kg units (A + B).
TECHNICAL DATA:
Application of sealant: after 20’.
Colours: transparent.
Application: brush.
Consumption: 150 g/m² (10-50 g/metre of treated
1 cm-deep joint).
Packaging: 150 g canisters.
31