GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
218<br />
27. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY<br />
27.1 Mortars for the building industry _________________________________________________________________<br />
BEtonFLuid<br />
BEtonFLuid is a high-strength (Rck<br />
40 N/mm²), self-compacting concrete<br />
(SCC) made by VAGA, ideal for<br />
manufacturing all types of structural<br />
elements with a natural finish.<br />
BEtonFLuid is particularly suitable<br />
for casting into special formwork,<br />
including where there is a high density<br />
of reinforcement rods, without the risk<br />
of segregation.<br />
BIOstabilitura<br />
Highly compatible, ecological finishing<br />
which responds fully to the construction<br />
requirements of eco-friendly building<br />
work.<br />
Finishing mortar for walls, made entirely<br />
with high quality, NATURAL, transpirant,<br />
eco-compatible, raw materials. Suitable<br />
for rendering internal and external<br />
surfaces.<br />
CALCESTRUZZO<br />
Formulate with latest-generation<br />
admixtures, to cement any and all your<br />
ideas.<br />
Pre-dosed concrete for small<br />
jobs, structural casts and<br />
natural-finish elements,<br />
including in those places<br />
difficult to reach with conventional<br />
casting systems.<br />
FIBROmalta<br />
Special fibre-reinforced render for the<br />
best results with the minimum effort.<br />
Suitable for render and general wall<br />
coatings. The micro-fibres guarantee<br />
no crack formation caused by plastic<br />
shrinkage when drying out. It is suitable<br />
for application with a rendering machine<br />
and is even more attractive when<br />
applied by hand.<br />
MALTE<br />
PER INTONACI<br />
CS IV<br />
CONFORME ALLA NORMA<br />
EUROPEA EN 998-1<br />
MALTE<br />
PER MURATURA<br />
M5<br />
CONFORME ALLA NORMA<br />
EUROPEA EN 998-2<br />
EN<br />
206-9<br />
EN<br />
206-1<br />
EN 998-1<br />
EN 998-2<br />
TECHNICAL DATA<br />
Characteristic strength: Rck40.<br />
Exposure class: XC4, XD3, XS3, XF1, XA1.<br />
Water/cement ratio: ≤ 0.45.<br />
Yield: 86x25 kg sacks per m³ of concrete.<br />
Packaging: 25 kg sacks.<br />
TECHNICAL DATA:<br />
Mixing ratio: the product is supplied ready to use.<br />
If necessary, mix well before use.<br />
Coefficient of permeability to water vapour: μ = 9.<br />
Composition: Super-fine lime (type CL 90-S) and<br />
natural, fine silica sand (cat. 0/1 mm).<br />
Yield: approximately 2.0-3.0 kg per square metre<br />
per mm of thickness.<br />
Packaging: 25 kg bags.<br />
TECHNICAL DATA:<br />
Characteristic strength: Rck 37.<br />
Consistency class: S4 (fluid).<br />
Exposure class: XC4 - XS1 - XD2 - XF2 - XA1.<br />
Water/cement ratio: ≤ 0.46.<br />
Yield: 86x25 kg bags per m³ of concrete.<br />
Packaging: 25 kg bags.<br />
TECHNICAL DATA:<br />
Fire resistance: REI 180.<br />
Mixing ratio: 1 25 kg sack of FIBROmalta with<br />
approx. 3.5 litres of water.<br />
Mixing time: 3 minutes.<br />
Pot life of mix: 30-40 minutes.<br />
Compressive strength after 28 days: ≥ 6 N/mm².<br />
Yield: 100 kg (4 bags) for approximately 6 m² per<br />
mm of thickness or approximately 4.5 m² of wall with<br />
12x12x24 cm bricks.<br />
Packaging: 25 kg bags.