GENERAL CATALOGUE - Mapei

162
21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
21.1 Strengthening concrete and steel structures ____________________________________________________
Adesilex PG1
Two-component, rapid-setting
thixotropic adhesive for structural
bonds.
Adesilex PG1 Rapid
Two-component, rapid-setting
thixotropic epoxy adhesive for structural
bonds.
Adesilex PG2
Two-component thixotropic epoxy
adhesive with long workability time for
structural bonds.
Carboplate
Pultruded carbon fibre plate
impregnated with epoxy resin with a
protective plastic film on both faces.
EN 1504-4
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-4
STRUCTURAL BONDING
EN 1504-4
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-4
STRUCTURAL BONDING
EN 1504-4
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-4
STRUCTURAL BONDING
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 3 : 1.
Pot life of mix: 35 minutes (at +23°C).
Minimum applicable thickness: 1-2 mm.
Maximum applicable thickness: 1 cm per layer.
Classification: EN 1504-4.
Storage: 24 months.
Application: trowel.
Consumption: 1.65-1.75 kg/m² per mm of thickness.
Packaging:
2 kg kits:
– 1.5 kg drums (comp. A);
– 0.5 kg drums (comp. B).
6 kg kits:
– 4.5 kg drums (comp. A);
– 1.5 kg drums (comp. B).
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 3 : 1.
Pot life of mix: 10 minutes (at +23°C).
Minimum applicable thickness: 1-2 mm.
Maximum applicable thickness: 1 cm per layer.
Classification: EN 1504-4.
Storage: 24 months.
Application: trowel.
Consumption: 1.65-1.75 kg/m² per mm of thickness.
Packaging:
6 kg kits:
– 4.5 kg drums (comp. A);
– 1.5 kg drums (comp. B).
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 3 : 1.
Pot life of mix: 50 minutes (at +23°C).
Minimum applicable thickness: 1-2 mm.
Maximum applicable thickness: 1 cm per layer.
Classification: EN 1504-4.
Storage: 24 months.
Application: trowel.
Consumption: 1.65-1.75 kg/m² per mm of thickness.
Packaging:
6 kg kits:
– 4.5 kg drums (comp. A);
– 1.5 kg drums (comp. B).
TECHNICAL DATA:
Modulus of elasticity: 170 - 200 - 250 GPa.
Fibre content: 68% - 68% - 65%.
Thickness: 1.4 mm.
Width: 50, 100 and 150 mm.
Resistant section: 70, 140 and 210 mm².
Tensile strength (MPa): 3,100 - 3,300 - 2,500.
Elongation at failure: 2% - 1.4% - 0.9%.
Packaging: 25 m rolls.