GENERAL CATALOGUE - Mapei

Mapefloor Decor 700
Two-component, solvent-free epoxy
paste in water dispersion to create
floors with a trowel-effect or mottled
finish.
May be coloured with
MAPECOLOR PASTE.
Mapefloor EP19
Three-component acid and wearresistant
epoxy mortar for floors.
Mapefloor Finish 50
Two-component, moisture curing,
aliphatic transparent polyurethane
finishing product.
Mapefloor Finish 51
Two-component aliphatic polyurethane
finishing product containing special
fillers to give an opaque finish.
SR
SYNTHETIC
RESINS
B2,0
AR0,5-IR20-Bfl-s1
EN 13813
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 1 : 4.
Colour of mix: cream.
Consistency of mix: paste.
Dust dry at +23°C and 50% R.H.: 2 hours.
Set to light foot traffic at +23°C and 50% R.H.:
12 hours.
Final hardening time: 7 days.
Compressive strength after 7 days: (DIN EN 196):
70 N/mm².
Flexural strength after 7 days: (DIN 1048): 30 N/mm².
Modulus of elasticity (DIN 1048): 15000 N/mm².
Taber abrasion resistance after 7 days (CS17 disk -
1000 g - 1000 revs): 50 mg.
Storage: 24 months in its original sealed packaging.
Application: smooth trowel.
Consumption: from 1 to 1.5 kg/m² per coat according
to the characteristics of the substrate and type of
decorative finish required.
Packaging: 10 kg kits (A + B).
TECHNICAL DATA:
Mixing ratio: A/B/C = 7.5/2.5/90.
Consistency of mix: damp sand.
Application temperature range: from +5°C to +30°C.
Workability time: from 30 to 40 minutes.
Set to light foot traffic: 6 hours.
Ready for use: 12 hours.
Resistance to temperatures: from -20°C to +120°C.
Resistance to ageing: excellent.
Resistance to oils: excellent.
Resistance to acids and alkalis: excellent.
Compressive strength after 7 days: (EN 196/1):
50 N/mm².
Flexural strength after 7 days: (EN 196/1): 20 N/mm².
Taber abrasion resistance after 7 days (H22 disk -
1000 g - 1000 revs): 1.1 g.
Storage: 24 months in its original sealed packaging.
Application: trowel and smooth metal trowel.
Consumption: 20 kg/m² per cm of thickness;
Packaging: 10 kg kits.
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 100 : 3.33.
Colour of mix: transparent.
Consistency of mix: fluid.
Bucholz hardness (after 7 days at +23°C): 90.
Dust dry (at +23°C and 50% R.H.): 6 hours.
Set to light foot traffic (at +23°C and 50% R.H.): 24
hours.
Final hardening time: 7 days.
Taber Test (after 7 days at +23°C and 50% R.H.,
CS17 disk, 1000 cycles, 1000 g): 20 mg.
Storage: 12 months in its original sealed packaging.
Application: short-haired roller, such as mohair.
Consumption: 0.1-0.2 kg/m² per coat according to
absorption.
Packaging: 5 kg kits (A + B).
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 10 : 1.
Colour of mix: opaline.
Consistency of mix: fluid.
Application temperature range: from +5°C to +30°C.
Set to light foot traffic at +23°C and 60% R.H.:
approx. 16 hours.
Ready for contact with aggressive chemicals at
+20°C and 60% R.H.: approx. 5 days.
Minimum waiting time before coating at +20°C:
> 24 hours.
Maximum waiting time before coating at +20°C:
< 48 hours.
Taber Test (after 7 days at +23°C, CS17 disk,
1000 cycles, 1000 g): 35 mg.
Storage: 6 months in its original sealed packaging.
Application: short-haired roller such as mohair, by
spray or airless spray system.
Consumption: 0.06-0.1 kg/m² per coat.
Packaging: 3.3 kg kits (A + B).
101