GENERAL CATALOGUE - Mapei

Mapegum PU 1K
One-component, solvent-free, flexible
polyurethane membrane for flexible
waterproofing coats and bonds for new
ceramic floors on new and old balconies
and terraces without removing the old
ceramic coating.
Mapegum WPS
Quick-drying flexible liquid membrane
for waterproofing internal surfaces.
Mapelastic
Two-component, flexible cementitious
mortar for protecting and waterproofing
concrete surfaces, balconies, terraces,
bathrooms and swimming pools.
Mapelastic
AquaDefense
Ready-to-use, ultra quick-drying,
flexible liquid membrane for
waterproofing internal and external
surfaces.
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
PI-MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
TECHNICAL DATA:
Consistency: creamy paste.
Density of the mix: 1500 kg/m³.
Storage: 12 months.
Application temperature range: from +5°C to +35°C.
Hardening time for a 2 mm thick layer: 12 hours.
Waiting time before laying ceramic tiles: 12-24 hours.
Set to light foot traffic: 12-24 hours.
Tensile strength: 1.6 N/mm².
Elongation at failure: 140%.
Tear strength: 10.5 N/mm.
In service temperature range: from -20°C to +70°C.
Resistance to 5% lactic acid solution: excellent.
Resistance to 5% acetic acid solution: excellent.
Resistance to 5% hydrochloric acid solution: excellent.
Resistance to 3% potassium hydroxide solution:
excellent.
Consumption: 1.4 kg/m² per mm of thickness.
Packaging: 15 kg aluminium bags contained in plastic
drums.
TECHNICAL DATA:
Consistency: paste.
Density of the mix: 1.45 g/cm³.
pH: 9.
Dry solids content: 75%.
Storage: 24 months.
Minimum filming temperature: +5°C.
Application temperature range: from +5°C to +35°C.
Time for complete drying of a 2 mm thick layer:
5 hours at 23°C
Time for complete drying of a 2 mm thick layer:
12 hours at 5°C.
Waiting time before laying coating: 12-24 hours.
Resistance to temperature variations: excellent.
Resistance to ageing: excellent.
Resistance to solvents and oils: fair.
Resistance to acids and alkalis: fair.
In service temperature range: from -30°C to +100°C.
Consumption: 1.5 kg/m² per mm of thickness.
Packaging: 5, 10 and 25 kg drums.
TECHNICAL DATA:
Consistency of mix: plastic-trowable.
Mixing ratio: comp. A: comp. B = 3 : 1.
Pot life of mix: approximately 1 hour.
Application temperature range: from +5°C to +35°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 - coating (C) principles PI,
MC and IR.
Storage: 12 months.
Application: trowel or by spray.
Consumption:
– trowel: 1.7 kg/m² per mm of thickness;
– spray: 2.2 kg/m² per mm of thickness.
Packaging:
– 32 kg units: 24 kg bags + 8 kg tanks;
– 16 kg units: 2x6 kg bags + 4 kg tanks.
TECHNICAL DATA:
Consistency: paste.
Application temperature range: from +5°C to +35°C
at +23°C and 50% R.H..
Waiting time between first and second coat:
approximately 1 hour (at +23°C and 50% R.H.).
Waiting time before laying coating: 3-4 hours (at +23°C
and 50% R.H.)..
Minimum applicable thickness: 0.8 mm in 2 coats.
Storage: 24 months.
Application: roller, brush or trowel.
Consumption: 1.3 kg/m² per mm of thickness.
Packaging: 15 kg drums.
201