GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
178<br />
23. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS<br />
Aquaflex<br />
Liquid membrane used to form a<br />
permanent shell around asbestos<br />
cement and for flexible waterproofing<br />
membranes.<br />
Primer for Aquaflex<br />
Synthetic resin primer in solvent,<br />
specifically formulated for bitumen<br />
surfaces in asbestos cement and<br />
surfaces with unknown adherence<br />
properties.<br />
Vinavil 03V<br />
Specially for asbestos<br />
Temporary encapsulation of<br />
asbestos-cement panels.<br />
TECHNICAL DATA:<br />
Consistency: paste.<br />
Colour: grey and white.<br />
Density (EN ISO 2811-1) (g/cm³): approx. 1.01.<br />
Dry solids content: (EN ISO 3251) (%): approx. 15.<br />
Dilution rate: 5-10% of water.<br />
Waiting time between each coat: 24 hours.<br />
Application temperature range: from +5°C to +35°C.<br />
Cleaning: water.<br />
Storage: 24 months.<br />
Application: roller, brush, trowel or spray.<br />
Consumption (kg/m²): approx. 0.4 (for one coat of the<br />
product).<br />
Packaging: 5, 10 and 25 kg.<br />
TECHNICAL DATA:<br />
Consistency: fluid liquid.<br />
Colour: transparent.<br />
Density (EN ISO 2811-1) (g/cm³): approx. 0.96.<br />
Dry solids content: (EN ISO 3251) (%): approx. 10.<br />
Dilution rate: ready to use; 30-40% of nitro thinners<br />
for surfaces with poor absorbency.<br />
Waiting time before applying other products:<br />
6-8 hours.<br />
Application temperature range: from +5°C to +35°C.<br />
Cleaning: white spirit or nitro thinners.<br />
Storage: 24 months.<br />
Application: roller, brush or spray.<br />
Consumption (kg/m²): approx. 0.16.<br />
Packaging: 6 kg.<br />
TECHNICAL DATA:<br />
Consistency: fluid liquid.<br />
Colour: red.<br />
Density (EN ISO 2811-1) (g/cm³): approx. 1.08.<br />
Dry solids content: (EN ISO 3251) (%): approx. 50.<br />
Dilution rate: ready to use; 25% of water if applied<br />
by pump.<br />
Waiting time before applying other products:<br />
1- 2 hours.<br />
Application temperature range: from +5°C to +35°C.<br />
Cleaning: water.<br />
Storage: 24 months.<br />
Application: roller, brush or pump.<br />
Consumption (kg/m²): approx. 0.2-0.3.<br />
Packaging: 5, 10 and 25 kg.