GENERAL CATALOGUE - Mapei

Elastocolor
Rasante SF
Fibre-reinforced elastomeric,
thick-layered finishing product with
high filling properties, for internal and
external surfaces.
Elastocolor Waterproof
Waterproof, easy-to-clean acrylic paint
for internal and external surfaces in
permanent contact with water.
Malech
Acrylic resin undercoat in water
dispersion to even out the absorption
of substrates before applying other
products.
Mapecoat DW 25
Two-component epoxy paint for
anti-acid and non-toxic coatings on
concrete surfaces, suitable for contact
with drinking water.
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
PI-MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
PI-MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
TECHNICAL DATA:
Consistency: thick liquid.
Colour: white or various colours using the ColorMap ®
automatic colouring system.
Density (EN ISO 2811-1) (g/cm³): approx. 1.47.
Dry solids content: (EN ISO 3251) (%): approx. 77.
Dilution rate: as is or diluted with 5% of water.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: trowel, roller, brush or spray.
Consumption:
– trowel: 700-800 g/m² per coat;
– brush or roller: approx. 500 g/m² per coat;
– spray 800-1000 g/m² per coat.
Packaging: 20 kg.
TECHNICAL DATA:
Consistency: thick liquid.
Colour: colours from the colour chart range using the
ColorMap ® automatic colouring system
Density (EN ISO 2811-1) (g/cm³): approx. 1.18.
Dry solids content: (EN ISO 3251) (%): approx. 59.
Dilution rate: as is or diluted with 5-10% of water.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller or brush.
Consumption:
– 0,3-0,5 kg/m² (for two coats of the product) for structures
which are not immersed in water;
– 0,6-0,8 kg/m² (for two/three coats of the product) for
structures which are immersed in water.
Packaging: 20 kg.
TECHNICAL DATA:
Consistency: fluid liquid.
Colour: transparent.
Density (EN ISO 2811-1) (g/cm³): approx. 1.01.
Dry solids content: (EN ISO 3251) (%): approx. 15.
Application: roller, brush or spray.
Dilution rate: ready to use; 30-35% of water for
surfaces with low absorbency.
Waiting time before applying other products:
24 hours.
Application temperature range: from +5°C to +35°C.
Consumption (kg/m²): 0.10-0.15.
Cleaning: water.
Storage: 24 months.
Application: brush, roller or spray.
Consumption: 0,10-0,15 kg/m².
Packaging: 2 and 10 kg.
TECHNICAL DATA:
Consistency: component A: thick paste, component
B: fluid paste.
Colour: component A: white, component B:
transparent.
Density (EN ISO 2811-1) (g/cm³): component A 1.43,
component B 1.003.
Dilution rate: supplied ready to use.
Waiting time between each coat: 6-24 hours.
Complete hardening time: 3 days.
Application temperature range: from +5°C to +35°C.
Cleaning: ethanol.
Storage: 24 months.
Application: roller, brush or spray.
Consumption (kg/m²): 0.4-0.6 (for one coat of the
product).
Packaging: 5 kg kits (A + B).
185