GENERAL CATALOGUE - Mapei

Planitop 200
One-component, high-bonding
cementitious mortar for smoothing
uneven surfaces and finishing (with
natural effect) internal and external
walls.
Planitop 207
One-component, high-bonding
cementitious mortar for smoothing
uneven surfaces and rough finishing
internal and external masonry and
concrete walls.
Planitop Fast 330
Quick-setting, fibre-reinforced
cementitious levelling mortar for internal
and external floors and walls, applied
in layers from 3 to 30 mm to even out
irregularities.
Triblock Finish
Three-component, epoxy-cementitious
mortar for smoothing damp substrates.
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
TECHNICAL DATA:
Maximum dimension of aggregate: 0.5 mm.
Mixing ratio: 100 parts of PLANITOP 200 with 20-23 parts
of water.
Pot life of mix: approximately 1 hour and 30 minutes
(at 20°C).
Minimum applicable thickness: 1 mm.
Maximum applicable thickness: 3 mm per layer (6 mm in
2 layers with MAPENET 150 sandwiched between).
Classification:
– EN 998-1 - type GP mortar, category CS IV;
– EN 1504-2 - coating (C) principles MC and IR.
Storage: 12 months.
Colour: grey and white.
Application: trowel.
Consumption: approximately 1.3 kg/m² per mm of
thickness.
Packaging: 25 kg bags.
TECHNICAL DATA:
Maximum dimension of aggregate: 0.7 mm.
Mixing ratio: 100 parts of PLANITOP 207 with
17-19 parts of water.
Pot life of mix: approximately 1 hour (at +20°C).
Minimum applicable thickness: 1 mm.
Maximum applicable thickness: 3 mm per layer
(6 mm in 2 layers with MAPENET 150 sandwiched
between).
Classification:
– EN 998-1 - type GP mortar, category CS IV;
– EN 1504-2 - coating (C) principles MC and IR.
Storage: 12 months.
Colour: grey and white.
Application: trowel.
Consumption: approximately 1.5 kg/m² per mm of
thickness.
Packaging: 25 kg bags.
TECHNICAL DATA:
Maximum dimension of aggregate: 1 mm.
Mixing ratio: 100 parts of PLANITOP FAST 330 with
18-20 parts of water.
Pot life of mix: 20 minutes (at +20°C).
Minimum applicable thickness: 3 mm.
Maximum applicable thickness: 3 cm per layer.
Classification:
– EN 998-1 - type GP mortar, category CS IV;
– EN 1504-2 - coating (C) principles MC and IR.
Storage: 12 months.
Application: trowel.
Consumption: 14.5 kg/m² per cm of thickness.
Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA:
Maximum dimension of aggregate: 0.2 mm.
Mixing ratio:
comp. A : comp. B : comp. C = 4.8 : 15.2 : 80.
Pot life of mix: 40 minutes (at +23°C).
Minimum applicable thickness: 1 mm.
Maximum applicable thickness: 3 mm per layer
(up to 5 mm on limited areas).
Classification:
– EN 1504-2 - coating (C) principles MC and IR.
Storage: 12 months.
Application: trowel or rendering machine.
Consumption: 2 kg/m² per mm of thickness.
Packaging:
31.25 kg kits:
– 1.5 kg drums (comp. A);
– 4.75 kg drums (comp. B);
– 25 kg bags (comp. C).
145