GENERAL CATALOGUE - Mapei

98
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
11.1 Resin based products____________________________________________________________________
Mapecoat DW 25
Two-component epoxy paint for
anti-acid and non-toxic coatings on
concrete surfaces, suitable for contact
with drinking water.
Mapecoat I 24
Two-component epoxy paint for
anti-acid coatings on concrete surfaces.
Mapecoat I 600 W
Two-component transparent epoxy
primer in water dispersion.
Mapecoat I 600 W
Lucido
Two-component, shiny, transparent
epoxy primer in water dispersion.
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
TECHNICAL DATA:
Consistency: component A thick paste,
component B fluid paste.
Colour: component A white, component B
transparent.
Density (EN ISO 2811-1) (g/cm³): component A 1.43,
component B 1.003.
Dilution rate: supplied ready to use.
Waiting time between each coat: 6-24 hours.
Complete hardening time: 3 days.
Application temperature range: from +5°C to +35°C.
Cleaning: ethanol.
Storage: 24 months.
Application: roller, brush or spray.
Consumption (kg/m²): 0.4-0.6 (per coat).
Packaging: 5 kg kits (A + B).
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 4 : 1.
Colour of mix: white, grey (Ral 7001) and neutral.
Application temperature range: from +5°C to +30°C.
Workability time: 30-40 minutes.
Setting time of film: 4-5 hours.
Waiting time between first and second coat:
6-24 hours.
Final hardening time: 3 days.
Storage: 12 months in its original sealed packaging.
Application: brush, roller or airless spray.
Consumption: 400-600 g/m² per coat.
Packaging: 5 kg kits (A + B).
TECHNICAL DATA:
Consistency of mix: fluid.
Colour of mix: opaline.
Mixing ratio: comp. A: comp. B = 2.3 : 3.6.
Workability time: 2-3 hours.
Dust dry at +23°C and 50% R.H.: 3-4 hours (first
coat); 6-8 hours (second coat).
Final hardening time: 7 days.
Application temperature range: from +8°C to +35°C.
Storage: 12 months in its original sealed packaging.
Application: roller, spray or airless spray.
Consumption: 300-500 g/m² according to the
absorption.
Packaging: 5.9 kg kits (A + B).
TECHNICAL DATA:
Consistency of mix: fluid.
Colour of mix: opaline.
Mixing ratio: comp. A: comp. B = 2.3 : 3.6.
Workability time: 2-3 h.
Dust dry at +23°C - 50% R.H.:
– 3-4 h (first coat);
– 6-8 h (second coat).
Final hardening time: 7 days.
Application temperature range: from +8°C to +35°C.
Storage: 24 months in its original sealed packaging.
Application: roller, spray or airless spray.
Consumption: 300-500 g/m² according to absorption.
Packaging: 5.9 kg kits (A + B).