GENERAL CATALOGUE - Mapei

Mapelastic Foundation
Two-component, flexible cementitious
mortar for waterproofing concrete
surfaces subject to negative and
positive hydraulic lift.
Mapeproof
Bentonite waterproofing sheets for
structures below ground level, suitable
for both horizontal and vertical surfaces.
Mapeproof CD
Washers used to fasten MAPEPROOF
bentonite sheets in place.
Mapeproof LW
Bentonite waterproofing sheets for use
on horizontal and vertical structures
below ground level with a maximum
water table of 5 metres.
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
PI-MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
1213-CPD-4489
1213-CPD-4489
TECHNICAL DATA:
Consistency: thixotropic.
Mixing ratio: comp. A: comp. B = 2.2 : 1.
Pot life of mix: approximately 1 hour (at +20°C).
Application temperature range: from +5°C to +40°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 - coating (C) principles PI,
MC and IR.
Storage: 12 months.
Application: roller or spray.
Consumption:
– by roller: 1.65 kg/m² per mm of thickness;
– by spray: 2.2 kg/m² per mm of thickness.
Packaging:
32 kg kits:
component A: 22 kg bags;
component B: 10 kg drums.
TECHNICAL DATA:
Lower layer of geo-textile fabric: polypropylene fabric,
140 g/m².
Upper layer of geo-textile fabric: non-woven polypropylene
fabric, 220 g/m².
Layer of bentonite: natural sodium.
Aeric mass of bentonite (EN 14196) (12% humidity): 5.1 kg/m².
Swelling index (ASTM D 5890): 27 ml/2 g.
Coefficient of permeability (ASTM D 5887): < 1E-11 m/s.
Static perforation (EN ISO 12236): 2400 N (-50 N).
Longitudinal tensile strength (EN ISO 10319): > 14.0 kN/m
(-0.5 kN/m).
Transversal tensile strength (EN ISO 10319): > 14.0 kN/m
(-0.5 kN/m).
Peeling (ASTM D 6496): > 420 N/m.
Bond strength to concrete (ASTM D 903): > 3.5 N/mm.
Thickness of product (EN 964-1): 6.0 mm.
Seal of overlaps: the geo-composite product is self-sealing.
Packaging:
1.1 m x 5 m rolls;
2.5 m x 22.5 m rolls;
5 m x 40 m rolls.
TECHNICAL DATA:
Packaging: boxes of 500 pieces.
TECHNICAL DATA:
Lower layer of geo-textile fabric: polypropylene fabric,
120 g/m².
Upper layer of geo-textile fabric: non-woven polypropylene
fabric, 220 g/m².
Layer of bentonite: natural sodium.
Aeric mass of bentonite (EN 14196) (12% humidity): 4.1 kg/m².
Swelling index (ASTM D 5890): 27 ml/2 g.
Coefficient of permeability (ASTM D 5887): < 1E-11 m/s.
Static perforation (EN ISO 12236): 1800 N (-50 N).
Longitudinal tensile strength (EN ISO 10319): > 12.0 kN/m
(-0.5 kN/m).
Transversal tensile strength (EN ISO 10319): > 12.0 kN/m
(-0.5 kN/m).
Peeling (ASTM D 6496): > 385 N/m.
Bond strength to concrete (ASTM D 903): > 2.7 N/mm.
Thickness of product (EN 964-1): 5.0 mm.
Seal of overlaps: the geo-composite product is self-sealing.
Packaging:
– 2.5 m x 22.5 m rolls;
– 5 m x 40 m rolls.
197