GENERAL CATALOGUE - Mapei

Idrostop PVC BI
PVC waterstop with internal lug for
sealing structural joints.
Mapeband
Alkali-resistant rubber tape with felt for
cementitious waterproofing systems
and liquid sheaths.
Mapeband PE 120
PVC tape for waterproofing systems
made from liquid membranes.
Mapeband TPE
TPE tape for flexible sealing and
waterproofing of expansion joints and
cracks subject to movement.
TECHNICAL DATA:
Application: mechanically.
Packaging: IDROSTOP PVC BI is available in three
sizes:
– IDROSTOP PVC BI20 (width 20 cm) in 25 m-long
rolls;
– IDROSTOP PVC BI25 (width 25 cm) in 25 m-long
rolls;
– IDROSTOP PVC BI30 (width 30 cm) in 25 m-long
rolls.
TECHNICAL DATA:
Tensile strength: > 2 N/mm².
Elongation at failure: > 400%.
Tear strength: > 100 N/mm.
In service temperature range: from -30°C to +60°C.
Packaging:
– 120 mmx50 m rolls;
– 120 mmx10 m rolls;
– 90° and 270° angular pieces;
– gaskets for outlets, sizes 120x120 mm and
400x400 mm;
– special cross and T pieces.
TECHNICAL DATA:
Thickness of tape: approximately 0.7 mm.
Resistance to water under pressure: 1.5 bar.
Elongation at failure: > 135%.
In service temperature range: from -5°C to +30°C
Packaging:
– 120 mmx50 m rolls;
– 120 mmx10 m rolls;
– 90° and 270° angular pieces;
– gaskets for outlets, sizes 120x120 mm and
425x425 mm.
TECHNICAL DATA:
Sizes available:
– 17 cm (MAPEBAND TPE 170);
– 32.5 cm (MAPEBAND TPE 325).
Width of expanding zone:
– MAPEBAND TPE 170: 50 mm;
– MAPEBAND TPE 325: 165 mm.
Thickness: 1.2 mm.
Ultimate strength: > 4.5 N/mm².
Elongation at failure: > 650%.
Bending at low temperatures: < -30°C.
Resistance to atmospheric agents and UV rays:
> 5000 ore.
Resistance to roots: no roots pass through.
Inflammability class: B2.
Waterproofness: ≤ 0.6 N/mm².
Resistance to temperatures: from -20°C to +80°C.
Maximum elongation of expanding zone:
– 5 mm (MAPEBAND TPE 170);
– 10 mm (MAPEBAND TPE 325).
Packaging: 30 m rolls.
205