GENERAL CATALOGUE - Mapei

Ultracoat High Traffic NEW
Two-component, NMP-free, 100%
polyurethane water-based varnish with
high resistance to wear and abrasion
and very low emission of volatile
organic compounds for wooden floors.
Suitable for floors subject to extremely
high pedestrian use
Ultracoat Oil
Natural drying oil resin for treating
wooden floors with an oil finish.
Ultracoat Oil Care
Natural drying resin oil in water
dispersion for finishing wooden floors
treated with oil.
Ultracoat
NEW
Premium Base
Two-component, NMP-free, waterbased
undercoat with very low emission
of volatile organic compounds (VOC)
and high insulating capacity, for
preparing solid and pre-sanded wooden
floors and wooden floors under repair
for water-based finishing cycles.
TECHNICAL DATA:
comp. A comp. B
Consistency: liquid liquid.
Colour:
Density of Ultracoat High
transparent off-white.
Traffic 10 gloss (g/cm³):
Density of Ultracoat High
1.040 1.060.
Traffic 30 gloss (g/cm³):
Density of Ultracoat High
1.030 1.120.
Traffic 60 gloss (g/cm³):
Storage: 12 months.
Dusty dry: 25 mins.
Touch dry: 40 mins.
1.040 1.080.
Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10%
with clean water.
Sanding: after 12 hours.
Varnishing (without sanding): after 2 hours, within 5 hours.
Ready for service: 36-48 hours.
Gloss factor: (10-30-60 gloss).
Consumption: first coat 80-100 ml/m²; successive coats
50-70 ml/m².
Packaging: 11 l kits (A+B) 2x5.5 l.
TECHNICAL DATA:
Consistency: fluid.
Storage: 24 months. Once opened a skin forms on the
surface and then hardens with time.
Application: with a roller or trowel (ULTRACOAT OIL
ROLLER/ULTRACOAT STEEL SPATULA).
Consumption:
– absorbent floors: approx. 150 g/m²;
– floors with low absorbency: approx. 70 g/m².
Packaging: 5 litre drums.
TECHNICAL DATA:
Consistency: fluid.
Storage: 24 months. Protect from frost.
Application: wax spreader.
Drying time: 30-60 minutes at +20°C. Complete
hardening after 24 hours.
Set to light foot traffic: 1 hour.
Ready for use: 3 days.
Consumption: approx. 15 g/m².
Packaging: 5 litre drums.
TECHNICAL DATA:
comp. A comp. B
Consistency: liquid liquid.
Colour: milky white transparent.
Density (kg/m³): 1.030 1.075.
Storage: 12 months 12 months.
EMICODE: EC1 R - very low emission level.
Duration of mix: 2 hours.
Mixing ratio: comp. A: comp. B = 5 : 1 (in volume).
Maximum permitted dilution ratio (Dir. 2004/42/
EEC): 10% with clean water or with ULTRACOAT EL.
Sanding: after 12 hours.
Varnishing (without sanding): after 2 hours, within
5 hours.
Consumption: 80-100 g/m² per coat.
Packaging: 6 litre kits (A+B).
71