GENERAL CATALOGUE - Mapei

PoroMap Rinzaffo
Macchina
Pre-blended, salt-resistant mortar
applied using a rendering machine
before applying POROMAP INTONACO
MACCHINA dehumidifying and
insulating mortar.
Mape-Antique
Intonaco NHL
Transpirant base render made
from natural hydraulic lime and
ECO-POZZOLAN, for application on
existing masonry work, including
those of historical interest, and on new
constructions.
TECHNICAL DATA:
Maximum diameter of aggregate: 2.5 mm.
Mixing ratio: 100 parts of POROMAP RINZAFFO
MACCHINA with approx. 18 parts of water.
Coefficient of permeability to water vapour: < 20 μ.
Workability time of mortar approx. 60 minutes.
Maximum applicable thickness: 5 mm.
Classification: EN 998-1 - type GP mortar, category
CS IV.
Storage: 12 months.
Application: continuous-mixing rendering machine.
Consumption: 7.5-8 kg/m² (for a 5 mm thick layer).
Packaging: 25 kg bags.
13.5 Lime based transpirant renders _______________________________________________________________
TECHNICAL DATA:
Maximum diameter of aggregate: 1.4 mm.
Mixing ratio: 100 parts of MAPE-ANTIQUE
INTONACO NHL with 19-21 parts of water (4.75-5.25 l
of water for each 25 kg bag of product).
Porosity of the mortar while still fresh: 20%.
Coefficient of permeability to water vapour: ≤ 12 μ.
Workability time of fresh mortar: approx. 60 minutes.
Minimum applicable thickness: 10 mm.
Maximum applicable thickness per layer: 30 mm.
Classification: EN 998-1 - type GP mortar,
category CS II.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: continuous-mixing rendering machine
or gauging trowel.
Consumption: approx. 14.5 kg/m² (per cm of thickness).
Packaging: 25 kg bags.
13.6 “Reinforced” renders, installation mortars and masonry _________________________________________
Mape-Antique
Strutturale NHL
High-performance transpirant mortar
for render and masonry work made
from natural hydraulic lime and
ECO-POZZOLAN, particularly suitable for
making “reinforced” and installation
mortar.
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS II
RENDERING AND
PLASTERING MORTAR
TECHNICAL DATA:
Maximum diameter of aggregate: 2.5 mm.
Mixing ratio: 100 parts of MAPE-ANTIQUE
STRUTTURALE NHL with 16-17 parts of water
(4-4.25 l of water for each 25 kg bag of product).
Porosity of the mortar while still fresh: 7%.
Coefficient of permeability to water vapour: 60 μ.
Workability time of fresh mortar: approx. 60 minutes.
Minimum applicable thickness: 10 mm.
Maximum applicable thickness per layer: 40 mm.
Classification:
– EN 998-1 - type GP mortar, category CS IV;
– EN 998-2 - type G mortar, class M 15.
Storage: 12 months.
Application: continuous-mixing rendering machine
or gauging trowel.
Consumption: approx. 17 kg/m² (per cm of thickness).
Packaging: 25 kg bags.
13.7 Skimming of de-humidifying transpirant and structural mortars ___________________________________
Mape-Antique FC
Civile
(formerly Mape-Antique FC
and Mape-Antique FC/R)
Salt-resistant, fine-grained lime and
ECO-POZZOLAN transpirant skimming
mortar for a natural finish on render.
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
EN 998-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-2
G-M15
MASONRY MORTAR
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
TECHNICAL DATA:
Maximum size of aggregate: 400 μm.
Mixing ratio: 100 parts of MAPE-ANTIQUE FC with
24-26 parts of water (6-6.5 l of water for each 25 kg
bag of product).
Workability time of fresh mortar: approx. 60 min.
Maximum applicable thickness per layer: 2 mm.
Classification: EN 998-1 - GP type mortar,
category CS IV.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Colour: white or terracotta.
Application: flat metal trowel.
Consumption: approx. 1.4 kg/m² (per mm of
thickness).
Packaging: 25 kg bags.
121