GENERAL CATALOGUE - Mapei

202
25. WATERPROOFING SYSTEMS
Mapelastic Smart
Two-component, high-flexibility
cementitious mortar applied by brush or
with a roller, for waterproofing concrete
surfaces such as balconies, terraces,
bathrooms and swimming pools and for
protecting against aggressive agents.
Mapenet 150
Alkali-resistant glass fibre mesh (in
compliance with the ETAG 004 guide)
for reinforcing protective waterproofing
layers, anti-fracture membranes and
thermal insulation systems.
Mapetex Sel
Macro-holed, non-woven polypropylene
fabric for reinforcing waterproofing
membranes.
Monolastic
One-component cementitious
waterproofing mortar.
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
PI-MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
TECHNICAL DATA:
Consistency of mix: fluid-brushable.
Mixing ratio: comp. A: comp. B = 2 : 1.
Pot life of mix: approximately 1 hour.
Application temperature range: from +5°C to +40°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 - coating (C) principles PI,
MC and IR.
Storage: 12 months.
Application: brush, roller or spray.
Consumption:
– brush or roller: 1.6 kg/m² per mm of thickness;
– spray: 2.2 kg/m² per mm of thickness.
Packaging: 30 kg units: 20 kg bags + 10 kg tanks.
TECHNICAL DATA:
Colour: blue.
Weight: 150 g/m² ± 5%.
Mesh size: 4x4.5 mm.
Storage: unlimited.
Packaging: 50 m x 1 m rolls.
TECHNICAL DATA:
Weight: 80 g/m².
Thickness: 0.6 mm.
Tensile strength: 5 KN/m.
Deformation at maximum strain:
– 90% in a longitudinal direction;
– 60% in a transversal direction.
Packaging: 25 m x 1 m rolls.
TECHNICAL DATA:
Consistency of mix: plastic-trowable.
Dry solids content: 100%.
Storage: 12 months.
Mixing water: 31-33%.
Pot life of mix: approximately 1 hour.
Application temperature range: from +5°C to +35°C.
Minimum thickness per coat: 1 mm.
Maximum thickness per coat: 2 mm.
Consumption: 1.1 kg/m² per mm of thickness.
Packaging: 20 kg paper bags.