GENERAL CATALOGUE - Mapei

Ultratop Living
Self-levelling, ultra-quick setting mortar
with special hydraulic binders, applied
at a thickness between 5 and 15 mm to
create abrasion-resistant internal floors
Ultratop Stucco
Grout made from special hydraulic
binders for sealing micro-porosity which
forms after the first polishing phase of
ULTRATOP.
Additix PE
Admixture to make epoxy and
polyurethane products thicker with a
thixotropic consistency.
Epoxy Speed
Solvent-free accelerator for epoxy
primers.
TECHNICAL DATA:
Colour: white, light grey, anthracite and natural.
Mixing ratio: 19-21 parts of water per 100 parts in weight
of ULTRATOP LIVING.
Applicable thickness: from 5 to 15 mm.
Self-levelling: yes.
Workability time: 15 minutes.
Setting time: 60-80 minutes.
Set to light foot traffic: 3-4 hours.
Compressive strength after 28 days at +23°C:
≥ 32 N/mm².
Flexural strength after 28 days at +23°C:
≥ 9 N/mm².
Böhme abrasion resistance after 28 days at +23°C:
11 cm³/50 cm².
Storage: 12 months in its original sealed packaging.
EMICODE: EC1 R - very low emission.
Application: by hand or mortar pump.
Consumption: 16.5-17.5 kg/m² per cm of thickness.
Packaging: 25 kg bags.
TECHNICAL DATA:
Colour: white, beige, light grey, red, anthracite and
standard.
Application: rubber trowel.
Consumption: according to the micro-porosity.
Packaging: 5 kg drums.
11.3 Complementary products for resin and cementitious floors ______________________________________
CEMENTITIOUS
SCREED
C30-F7
A12-A2fl-s1
EN 13813
TECHNICAL DATA:
Appearance: powder.
Colour: white.
Density: 960 kg/m².
Consumption: 2-5% by weight on the weight of the
resin.
Packaging: 1 kg drums.
TECHNICAL DATA:
Consumption: 2-3% of the total weight of the epoxy
binder used (A+B).
Packaging: 5 kg drums.
107