GENERAL CATALOGUE - Mapei

130
15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS
Porocol
Cementitious adhesive mortar
for expanded block masonry, fire
resistance class REI 180.
Porocol FF
One-component, fine-grained, white
cementitious mortar for laying cellularconcrete
blocks and for smoothing over
the surface in layers of up to 10mm
thick.
Fire resistance class according to
EN 1364-1 EI 240 - E 120.
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS III
RENDERING AND
PLASTERING MORTAR
EN 998-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-2
T-M5
MASONRY MORTAR
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS III
RENDERING AND
PLASTERING MORTAR
EN 998-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-2
T-M5
MASONRY MORTAR
TECHNICAL DATA:
Maximum diameter of aggregate: 1 mm.
Mixing ratio: 100 parts of POROCOL with
23-25 parts of water.
Pot life of mix: approximately 2-3 hours.
Minimum applicable thickness: 1 mm.
Maximum applicable thickness: 1.5 cm per layer.
Classification: EN 998-1 - type GP mortar, category
CS III.
EN 998-2 - type T mortar, class M5.
Storage: 12 months.
Application: notched or smooth trowel.
Consumption:
– as adhesive for flat block walls: 5-7 kg/m²;
– as skimming layer for flat block walls: 1.4 kg/m² per
mm of thickness.
Packaging: 25 kg bags.
TECHNICAL DATA:
Maximum diameter of aggregate: 1 mm.
Mixing ratio: 100 parts of POROCOL FF with
27-29 parts of water.
Pot life of mix: approximately 2-3 hours.
Minimum applicable thickness: 1 mm.
Maximum applicable thickness: 1 cm per layer.
Classification: EN 998-1 - type GP mortar, category
CS III.
EN 998-2 - type T mortar, class M5.
Storage: 12 months.
Application: notched or smooth trowel.
Consumption:
– as adhesive for flat block walls: 2-4 kg/m²;
– as skimming layer for flat block walls: 1.2 kg/m² per
mm of thickness.
Packaging: 25 kg bags.