GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Topcem Pronto<br />
Ready-to-use, normal-setting,<br />
controlled-shrinkage mortar for<br />
quick-drying (4 days) screeds.<br />
Topcem Pronto C60<br />
Ready-to-use, normal-setting,<br />
controlled-shrinkage mortar for quickdrying<br />
(4 days) screeds with high<br />
chemical resistance.<br />
TECHNICAL DATA:<br />
Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with<br />
1.7 litres of water.<br />
Workability time: 40-60 minutes.<br />
Set to light foot traffic: after 12 hours.<br />
Waiting time before laying: 24 hours for ceramic tiles,<br />
2 days for natural stone and 4 days for resilient and<br />
wood coverings.<br />
Residual humidity after 4 days: less than 2%.<br />
EMICODE: EC1 R Plus - very low emission.<br />
Storage: 12 months.<br />
Application: tapping and flattening with a straight<br />
edge.<br />
Consumption: 18-20 kg/m² per cm of thickness<br />
according to the grade of compacting.<br />
Packaging: 25 kg bags.<br />
TECHNICAL DATA:<br />
Mixing ratio: 1 25 kg bags of TOPCEM PRONTO C60<br />
with 1.9 litres of water.<br />
Workability time: 30-40 minutes.<br />
Set to light foot traffic: after 12 hours.<br />
Waiting time before laying: 24 hours for ceramic tiles,<br />
2 days for natural stone and 4 days for resilient and<br />
wood coverings.<br />
Residual humidity after 4 days: less than 2%.<br />
EMICODE: EC1 R Plus - very low emission.<br />
Storage: 12 months.<br />
Application: tapping and flattening with a straight<br />
edge.<br />
Consumption: 18-20 kg/m² per cm of thickness.<br />
according to the grade of compacting.<br />
Packaging: 25 kg bags.<br />
1.2 Sand and cement screeds _____________________________________________________________________<br />
NEW<br />
NEW<br />
Mapefibre ST24/ST42<br />
Structural polymer fibres for<br />
cementitious concrete and screeds.<br />
May be used to completely or partially<br />
substitute conventional reinforcement.<br />
Available in lengths of 24 and 42 mm.<br />
Mapescreed 704<br />
NEW<br />
Special plasticising and water-reducing<br />
additive for cementitious screeds,<br />
including heated and cooling screeds.<br />
NEW<br />
EN 13813<br />
C60-F8<br />
A1 fl<br />
EN 13813<br />
TECHNICAL DATA:<br />
Dosage: from 1 to 7 kg per cubic metre of mix.<br />
Packaging: 6 kg polyethylene bags.<br />
TECHNICAL DATA:<br />
Dosage: from 1 to 1.5 kg every 100 kg of cement.<br />
Packaging: 10 and 25 kg cans.<br />
15
Change language