GENERAL CATALOGUE - Mapei

Eco Prim T
Solvent-free acrylic primer with a very
low emission level of volatile organic
compounds (VOC) for absorbent and
non-absorbent substrates.
Eporip
Two-component epoxy adhesive for
monolithic sealing cracked screeds.
Eporip Turbo
Two-component, quick-hardening
polyester resin for monolithic sealing
cracked screeds.
Livigum
Admixture for cementitious mortar
and smoothing compounds.
EN 1504-4
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-4
STRUCTURAL BONDING
TECHNICAL DATA:
Consistency: fluid liquid.
Colour: white.
Dilution rate: as is on non-absorbent surfaces, 1 : 1
or 1 : 2 on absorbent surfaces.
Waiting time before applying smoothing
compounds: 1-5 hours according to the surrounding
conditions and the absorption of the substrate.
EMICODE: EC1 Plus - very low emission.
Storage: 24 months.
Application: roller or brush.
Consumption: 0.10-0.20 kg/m².
Packaging: 5 and 20 kg drums.
TECHNICAL DATA:
Consistency: comp. A: fluid paste;
comp. B: fluid paste.
Colours: comp. A: black; comp. B: white.
Mixing ratio: comp. A : comp. B = 3 : 1.
Setting time: 24 hours.
Workability time: 60 minutes.
Open time: 5 hours.
Storage: 24 months.
Application: brush, trowel or by pouring.
Consumption: 1.35 kg/dm³.
Packaging: 2 kg and 10 kg kits.
TECHNICAL DATA:
Consistency: comp. A: fluid paste; comp. B: fluid
paste.
Colours: comp. A: grey; comp. B: white.
Mixing ratio: comp. A : comp. B = 500 : 8.
Setting time: 20-30 minutes.
Workability time: 7 minutes.
Storage: 12 months.
Application: pouring.
Consumption: 1.7 kg per dm³ of filled cracks.
Packaging: 508 g metal cans (component A: 500 g;
component B: 8 g).
TECHNICAL DATA:
Consistency: thick liquid.
Colour: white.
Dilution rate: with water at a ratio of 1 : 4 - 1: 5 for
priming.
Storage: 12 months. Protect from frost.
Consumption: according to dilution rate.
Packaging: 5, 10 and 25 kg drums.
27