GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
GENERAL CATALOGUE - Mapei
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
186<br />
24. WALL PROTECTIVE AND DECORATIVE COATINGS<br />
Mapecoat I 24<br />
Two-component epoxy varnish for antiacid<br />
coatings on concrete surfaces.<br />
Mapecoat W<br />
Two-component, epoxy paint in water<br />
dispersion for protecting cementitious<br />
substrates.<br />
Quarzolite Base Coat<br />
Coloured acrylic undercoat with a<br />
smooth finish and good filling and<br />
adhesion promoting properties, for<br />
internal and external surfaces.<br />
ETA 10/0024<br />
ETA 10/0025<br />
Quarzolite Graffiato<br />
Highly protective acrylic scratcheffect<br />
coating product for evening out<br />
surface defects on internal and external<br />
surfaces.<br />
ETA 10/0024<br />
ETA 10/0025<br />
EN 1504-2<br />
IN COMPLIANCE WITH<br />
EUROPEAN STANDARD<br />
PRINCIPLES<br />
PI-MC-PR-RC-IR<br />
SURFACE PROTECTION<br />
SYSTEMS FOR CONCRETE<br />
EN 15824<br />
IN COMPLIANCE WITH<br />
EUROPEAN STANDARD<br />
EN 15824<br />
EXTERNAL AND INTERNAL PLASTERS<br />
BASED ON ORGANIC BINDERS<br />
TECHNICAL DATA:<br />
Consistency: component A thick paste,<br />
component B fluid paste.<br />
Colour: component A white, grey (Ral 7001) and<br />
neutral, component B transparent.<br />
Density (EN ISO 2811-1) (g/cm³): component A 1.43,<br />
component B 1.003.<br />
Dilution rate: supplied ready to use.<br />
Waiting time between each coat: 6-24 hours.<br />
Complete hardening time: 3 days.<br />
Application temperature range: from +5°C to +35°C.<br />
Cleaning: ethanol.<br />
Storage: 24 months.<br />
Application: roller, brush or spray.<br />
Consumption (kg/m²): 0.4-0.6 (for one coat of the<br />
product).<br />
Packaging: 5 kg kits (A + B).<br />
TECHNICAL DATA:<br />
Consistency: component A fluid paste,<br />
component B thick paste.<br />
Colour: component A transparent, component B<br />
white or grey.<br />
Density (EN ISO 2811-1) (g/cm³): component A 1.1,<br />
component B 1.4.<br />
Dilution rate: supplied ready to use.<br />
Waiting time between each coat: 6-24 hours.<br />
Complete hardening time: 8-10 days.<br />
Application temperature range: from +5°C to +35°C.<br />
Cleaning: water.<br />
Storage: 12 months.<br />
Application: roller, brush or spray.<br />
Consumption (kg/m²): 0.25-0.3 (for one coat of the<br />
product).<br />
Packaging: 20 kg kits (A + B).<br />
TECHNICAL DATA:<br />
Consistency: thick liquid.<br />
Colour: white or various colours using the ColorMap ®<br />
automatic colouring system.<br />
Density (EN ISO 2811-1) (g/cm³): approx. 1.68.<br />
Dry solids content: (EN ISO 3251) (%): approx. 65.<br />
Dilution rate: as is or diluted with 5% of water.<br />
Waiting time between each coat: 24 hours.<br />
Application temperature range: from +5°C to +35°C.<br />
Cleaning: water.<br />
Storage: 24 months.<br />
Application: roller, brush or spray.<br />
Consumption (kg/m²): 0.3-0.5 (for one coat of the<br />
product).<br />
Packaging: 20 kg.<br />
TECHNICAL DATA:<br />
Consistency: paste.<br />
Colour: white or various colours using the ColorMap ®<br />
automatic colouring system.<br />
Density (EN ISO 2811-1) (g/cm³): approx. 1.7-1.8<br />
(according to the grain size).<br />
Dry solids content: (EN ISO 3251) (%): approx. 85.<br />
Dilution rate: supplied ready to use.<br />
Waiting time between each coat: 24 hours.<br />
Application temperature range: from +5°C to +35°C.<br />
Cleaning: water.<br />
Storage: 24 months.<br />
Application: stainless steel or plastic float.<br />
Consumption (kg/m²):<br />
– 1.2 mm: 1.9-2.3 kg/m²;<br />
– 1.8 mm: 2.4-2.8 kg/m².<br />
Packaging: 20 kg.