GENERAL CATALOGUE - Mapei

Planicrete
Synthetic latex rubber to improve
adhesion and strength of cementitious
mortars.
Primer 3296
Acrylic primer in water dispersion with
high penetration, consolidating and antidust
properties for screeds.
Primer BI
Synthetic resin primer in solvent,
specifically produced to improve the
bond of polyurethane coating products
(from the PURTOP range) on old
bitumen membranes.
Primer EP
Two-component epoxy primer
in solvents for consolidating and
waterproofing cementitious screeds
and industrial floors.
TECHNICAL DATA:
Consistency: liquid.
Dry solids content: 40%.
Storage: 24 months.
Consumption:
– for adhesive slurry: 100-150 g/m²;
– to prepare screeds and render: 50-80 kg/m³.
Packaging: 5, 10 and 25 kg canisters and 12x1 kg
packages.
TECHNICAL DATA:
Consistency: liquid.
Colour: opaline.
Dilution ratio: as is, 1: 1 or 1:2 according to the
absorption of the substrate.
Drying time: 1-5 days.
Waiting time before laying with vinyl adhesive:
when dry.
Storage: 12 months.
Application: brush, roller or watering can.
Consumption: 0.1-0.5 kg/m².
Packaging: 5 and 10 kg drums.
TECHNICAL DATA:
Colour: transparent.
Consistency: fluid liquid.
Density according to EN ISO 2811-1 (g/cm³): 0.96.
Dry solids content (%): 10.
Storage: 24 months in its original sealed packaging.
Application temperature range: from +5°C to +35°C.
Ready for painting over: 2-4 hours.
Drying time: 5-6 hours at +20°C.
Consumption: 0.20 kg/m² per coat, depending on the
type of the substrates.
Packaging: 10 kg.
TECHNICAL DATA:
Minimum waiting time: 24 hours according to the
porosity of the substrate.
Consistency: liquid.
Colour: transparent.
Mixing ratio: comp. A : comp. B = 1 : 1.
Workability time: 4-5 hours.
Storage: 24 months.
Application: brush, roller or watering can.
Consumption: 0.5-0.7 kg/m².
Packaging: 5+5 kg drums.
29