GENERAL CATALOGUE - Mapei

Silexcolor Marmorino
Highly-decorative, fine-grained, silicate
mineral coating product in paste
form with high chemical resistance
for internal and external surfaces,
according to DIN 18363 Standards.
Silexcolor Paint
Highly-transpirant silicate paint with
a high chemical bond for internal and
external surfaces, according to
DIN 18363 Standards.
Silexcolor Primer
Highly transpirant silicate undercoat
with a smooth finish, according to
DIN 18363 Standards.
ETA 04/0061
Silexcolor Tonachino
Highly transpirant, thick-layered
silicate coating product with high filling
properties for internal and external
surfaces.
ETA 04/0061
ETA 10/0024
ETA 10/0025
EN 15824
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 15824
EXTERNAL AND INTERNAL PLASTERS
BASED ON ORGANIC BINDERS
TECHNICAL DATA:
Consistency: paste.
Colour: white or various colours using the ColorMap ®
automatic colouring system.
Density (EN ISO 2811-1) (g/cm³): approx. 1.61.
Dry solids content: (EN ISO 3251) (%): approx. 67.
Dilution rate: supplied ready to use.
Waiting time between each coat: 12 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 12 months.
Application: trowel.
Consumption (kg/m²): 0.8-1.0 (according to the type
of finish required).
Packaging: 5 and 20 kg.
TECHNICAL DATA:
Consistency: thick liquid.
Colour: white or various colours using the ColorMap ®
automatic colouring system.
Density (EN ISO 2811-1) (g/cm³): approx. 1.46.
Dry solids content: (EN ISO 3251) (%): approx. 55.
Dilution rate: 20% of SILEXCOLOR PRIMER.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 12 months.
Application: roller, brush or spray.
Consumption (kg/m²): 0.35-0.45 (for two coats of the
product).
Packaging: 20 kg.
TECHNICAL DATA:
Consistency: fluid liquid.
Colour: transparent.
Density (EN ISO 2811-1) (g/cm³): approx. 0.9.
Dry solids content: (EN ISO 3251) (%): approx. 14.
Dilution rate: supplied ready to use.
Waiting time before applying other products:
24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 12 months.
Application: roller, brush or spray.
Consumption (kg/m²): 0.1-0.15.
Packaging: 10 kg.
TECHNICAL DATA:
Consistency: paste.
Colour: white or various colours using the ColorMap ®
automatic colouring system.
Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95
(according to the grain size).
Dry solids content: (EN ISO 3251) (%): approx. 80.
Dilution rate: supplied ready to use.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 12 months.
Application: stainless steel or plastic float.
Consumption (kg/m²): 0.7 mm: 1.7-2.0 kg/m²;
1.2 mm: 1.9-2.3 kg/m²; 1.5 mm: 2.2-2.6 kg/m²;
2.0 mm: 2.6-3.0 kg/m².
Packaging: 20 kg.
191