GENERAL CATALOGUE - Mapei

104
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor I 350 SL
Two-component, multi-purpose,
neutral-coloured epoxy formulate, with
“class 1” and Euro-class “Bfl - s1” fire
resistance for industrial floor coatings
up to 4 mm thick.
May be coloured with
MAPECOLOR PASTE.
Mapefloor I 500 W
Two-component, vapour-permeable,
neutral-coloured epoxy formulate in
water dispersion for industrial floors.
May be coloured with
MAPECOLOR PASTE.
Mapefloor I 900
Two-component epoxy binder used for
preparing trowelled mortar with a damp
earth consistency for industrial floors.
Mapefloor I 910
Two-component epoxy binder for
trowelled mortar or bonding promoter
for resin coatings.
SR
SYNTHETIC
RESINS
B2,0
AR0,5-IR20-Bfl-s1
EN 13813
SR
SYNTHETIC
RESINS
B2,0
AR0,5-IR20-Bfl-s1
EN 13813
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 75 : 25.
Colour of mix: neutral.
Consistency of mix: thick fluid.
Pot life of mix at +20°C: 35 minutes.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 24 hours.
Final hardening time: 7 days.
Taber Test after 7 days, CS17 disk, 1000 cycles, 1000 g,
at +23°C - 50% R.H.: 70 mg.
Storage: 12 months in its original sealed packaging.
Application: by roller or flat or notched trowel.
Consumption:
– for 2 mm thick self-levelling coatings on substrates primed
with PRIMER SN: 2.0 kg/m²;
– for intermediate layers in 3 mm thick, multi-layer, non-slip
coatings on substrates primed with PRIMER SN: 0.9 kg/m²;
– for finishing layers in 1 mm and 3 mm thick multi-layer,
non-slip coatings on substrates primed with
PRIMER SN: 0.6 kg/m².
Packaging: 8 kg kits (A + B).
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 1 : 12.
Colour of mix: neutral.
Consistency of mix: thick fluid.
Pot life of mix at +20°C: 20 minutes.
Dust dry at +23°C and 50% R.H.: 3-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 16 hours.
Final hardening time: 7 days.
Taber Test after 7 days (EN ISO 5470-1) CS17 disk,
1000 cycles, 1000 g at +23°C - 50% R.H.: 110 mg.
Storage: 12 months in its original sealed packaging.
Application: notched or smooth trowel or notched rake.
Consumption:
– for 2 mm thick smooth self-levelling coatings on substrates primed
with MAPECOAT I 600 W: 4 kg/m²;
– for 5 mm thick, multi-layered non-slip systems:
as first layer:
MAPEFLOOR I 500 W 2-2.5 kg/m²;
QUARTZ 0.5 5 kg/m²;
as second layer:
MAPEFLOOR I 500 W 2-2.5 kg/m²;
QUARTZ 0.5 5 kg/m²;
as finishing layer:
MAPEFLOOR I 500 W 0.5-0.7 kg/m²
Packaging: 26 kg kits (A + B).
TECHNICAL DATA:
Mixing ratio: comp. A: comp. B = 50 : 100.
Colour of mix: transparent amber.
Consistency of mix: thick fluid.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 12 hours.
Final hardening time: 7 days.
Storage: 12 months in its original sealed packaging.
Application:
– as bonding promoter: roller or smooth trowel;
– for mortar: rake and aluminium straight edge.
Consumption:
– as bonding promoter: 0.5-0.7 kg/m²;
– for mortar: recommended ratio for mortar: 1 kg of
MAPEFLOOR I 900 ( A+B ) per 8-13 kg of QUARTZ 1.9,
consumption depends on the thickness to be applied.
Packaging: 15 kg kits (A + B).
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 100 : 50.
Colour of mix: transparent amber.
Consistency of mix: thick fluid.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 12 hours.
Final hardening time: 7 days.
Storage: 12 months in its original sealed packaging.
Application:
– for priming: roller or smooth trowel;
– for mortar: rake and aluminium straight edge.
Consumption:
– for priming: 0.3-0.5 kg/m² according to the absorption
of the substrate.
– for mortar: according to the thickness to be applied.
Packaging: 15 kg kits (A + B).