GENERAL CATALOGUE - Mapei

13.3 Horizontal chemical barriers against capillary rising damp _________________________________________
Mapestop
Agent applied by injection made from
micro-emulsion, concentrated silane
and siloxane used to form a chemical
barrier against capillary rising damp in
masonry.
13.4 De-humidifying masonry with binders and mortars for render ______________________________________
Mape-Antique CC
Macro-porous, salt-resistant
dehumidifying render made from lime
and ECO-POZZOLAN for repairing old
masonry, including on buildings of
historical interest.
Mape-Antique LC
Salt-resistant, lime and ECO-POZZOLAN
hydraulic binder mixed with aggregates
in various grain sizes to make
de-humidifying render and masonry
mortar.
Mape-Antique MC
Macro-porous, salt-resistant
dehumidifying render made from lime
and ECO-POZZOLAN for repairing old
masonry, including on buildings of
historical interest.
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
R-CS II
RENDERING AND
PLASTERING MORTAR
EN 998-1
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 998-1
GP-CS II
RENDERING AND
PLASTERING MORTAR
TECHNICAL DATA:
Dimension of particles: 20-60 nm.
Mixing ratio: 100 parts of MAPESTOP with
15-19 parts of water.
Silane/siloxane content: 100%.
Duration of solution: 24 hours.
Storage: 12 months.
Application: by gravity or suitable injection pump.
Consumption: according to the absorption of the
masonry. Approximately 8-9 kg/m of solution for
a 40 cm thick wall, corresponding to 0.4-0.6 kg of
MAPESTOP.
Packaging:
– 1 kg metal can with spout.
– 180 kg drums.
TECHNICAL DATA:
Maximum diameter of aggregate: 2.5 mm.
Mixing ratio: 100 parts of MAPE-ANTIQUE CC with
14-16 parts of water.
Porosity of the mix while still fresh: > 20%.
Coefficient of permeability to water vapour: ≤ 10 μ.
Workability time of fresh mortar approx. 1 hour.
Minimum applicable thickness: 20 mm.
Maximum applicable thickness per layer: 30 mm.
Classification: EN 998-1 - type R mortar, category
CS II.
Storage: 12 months.
Application: gauging trowel.
Consumption: 15 kg/m² (per cm of thickness).
Packaging: 25 kg bags.
TECHNICAL DATA:
Mixing ratio:
– 0.5-2.5 mm sand: 500 kg/m³ of MAPE-ANTIQUE LC
with 1,000 kg/m³ of sand and 225 l/m³ of water;
– 0.5-5 mm gravel: 450 kg/m³ of MAPE-ANTIQUE LC
with 1,150 kg/m³ of gravel and 210 l/m³ of water;
– 0-8 mm gravel: 400 kg/m³ of MAPE-ANTIQUE LC
with 1,300 kg/m³ of gravel and 200 l/m³ of water;
Storage: 12 months.
Application: trowel or by pouring.
Consumption: approximate (per cm of thickness):
– 5.0 kg/m² with fine sand (0.5-2.5 mm);
– 4.5 kg/m² with coarse sand (0.5-5 mm);
– 4.0 kg/m² with gravel (0-8 mm).
Packaging: 20 kg bags.
TECHNICAL DATA:
Maximum diameter of aggregate: 2.5 mm.
Mixing ratio: 100 parts of MAPE-ANTIQUE MC with
14-16 parts of water (3.5-4 l of water for each 25 kg
bag of product).
Porosity of the mix while still fresh: > 20%.
Coefficient of permeability to water vapour: ≤ 10 μ.
Workability time of fresh mortar approx. 60 minutes.
Minimum applicable thickness: 20 mm.
Maximum applicable thickness per layer: 30 mm.
Classification: EN 998-1 - type R mortar, category
CS II.
Storage: 12 months.
Application: gauging trowel.
Consumption: 15 kg/m² (per cm of thickness).
Packaging: 25 kg bags.
119