GENERAL CATALOGUE - Mapei

184
24. WALL PROTECTIVE AND DECORATIVE COATINGS
Elastocolor Net
Alkali-resistant glass fibre mesh for
reinforcing ELASTOCOLOR RASANTE
and ELASTOCOLOR RASANTE SF.
Elastocolor Paint
Elastomeric, crack-bridging,
permanently flexible, protective paint
with high resistance to chemicals for
internal and external surfaces.
Elastocolor Primer
Synthetic resin primer in solvent
specifically formulated to guarantee
excellent insulation and improve the
bond of ELASTOCOLOR PAINT,
ELASTOCOLOR RASANTE and
ELASTOCOLOR RASANTE SF to the
substrate. May also be used as a curing
agent for repair mortar.
Elastocolor Rasante
Fibre-reinforced, elastomeric, high
flexibility finishing product with good
defect covering capacity, for internal
and external applications.
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
PI-MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
EN 1504-2
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
PI-MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
TECHNICAL DATA:
Composition: 100% glass fibre.
Colour: white.
Mesh size (mm): 2.7 x 2.7.
Weight of primed mesh (g/m²): approx. 61.
Storage: unlimited.
Packaging: 50x1 m rolls.
TECHNICAL DATA:
Consistency: thick liquid.
Colour: white or various colours using the ColorMap ®
automatic colouring system.
Density (EN ISO 2811-1) (g/cm³): approx. 1.37.
Dry solids content: (EN ISO 3251) (%): approx. 63.
Dilution rate: 10-15% of water.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller, brush or spray.
Consumption (kg/m²): 0.2-0.4 (for one coat of the
product).
Packaging: 20 kg.
TECHNICAL DATA:
Consistency: fluid liquid.
Colour: transparent.
Density (EN ISO 2811-1) (g/cm³): approx. 0.96.
Dry solids content: (EN ISO 3251) (%): approx. 10.
Dilution rate: ready to use; 30-40% of nitro thinners
for surfaces with poor absorbency.
Waiting time before applying other products:
6-8 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: white spirit or nitro thinners.
Storage: 24 months.
Application: roller, brush or spray.
Consumption (kg/m²): 0.10-0.15.
Packaging: 10 kg.
TECHNICAL DATA:
Consistency: thick liquid.
Colour: white or various colours using the ColorMap ®
automatic colouring system.
Density (EN ISO 2811-1) (g/cm³): approx. 1.35.
Dry solids content: (EN ISO 3251) (%): approx. 67.
Dilution rate: as is or diluted with 5% of water.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller, brush, trowel or spray.
Consumption:
– trowel: 300-400 g/m² per coat;
– brush or roller: approx. 400 g/m² per coat;
– spray 400-700 g/m² per coat.
Packaging: 20 kg.