GENERAL CATALOGUE - Mapei

30
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
Primer EP Rustop
Two-component epoxy primer for metal
surfaces.
Primer G
Synthetic resin primer in water
dispersion with a very low content of
volatile organic compounds (VOC).
Primer G Conductive
Dark-coloured, solvent-free conductive
synthetic resin primer in water
dispersion.
Primer KL
Bonding promoter in solvent for twocomponent
epoxy, epoxy-polyurethane
and polyurethane adhesives and thinner
for PRIMER MF.
TECHNICAL DATA:
Mixing ratio: comp. A: comp B. = 100 : 30.
Colour of mix: white.
Consistency of mix: liquid.
Dry substances content (%): 70.
Density of mix (kg/m³): 1,100.
Viscosity of mix (mPa·s): 500 (# 3 - 50 rpm).
Workability time: 15-20 minutes at +20°C.
Surface temperature: at least +10°C.
Pot life: 6 h at +20°C.
Varnishing: after 6-8 h at +20°C.
Dusty dry: after 2 h at +20°C.
Final hardening time: 24 h.
Storage: 6 months in its original sealed packaging.
Application: by brush, roller or airless spray system.
Consumption: 0.2 kg/m².
Packaging: 5 kg kits (A + B).
TECHNICAL DATA:
Consistency: liquid.
Colour: blue.
Dilution rate: from 1:1 to 1: 3 with water according
to the absorption of the substrate.
Drying time: 2 hours according to the dilution rate
and the absorption of the substrate.
Application: brush.
EMICODE: EC1 - very low emission.
Storage: 24 months. Protect from frost.
Consumption: 0.1-0.2 kg/m² according to use.
Packaging: 5, 10 and 25 kg drums and 12x1 kg
boxes.
TECHNICAL DATA:
Consistency: liquid.
Colour: black.
Drying time: minimum 2 hours.
Electrical resistance: 50,000 ohm.
Storage: 24 months. Protect from frost.
Application: brush.
Consumption: 0.1-0.15 kg/m².
Packaging: 10 kg drums.
TECHNICAL DATA:
Consistency: liquid.
Colour: pinky transparent.
Dilution rate: PRIMER KL : PRIMER MF = 1: 6.
Drying time: 5 minutes.
Storage: 12 months.
Application: cotton rag.
Consumption: 0.3-0.4 kg/m².
Packaging: boxes 0f 12x0.8 litre bottles and 8 kg
metal drums.