GENERAL CATALOGUE - Mapei

Plastimul 1K Super
Plus
Mono-component, solvent-free, quickdrying,
low-shrinkage, high-yield,
high flexibility bitumen waterproofing
emulsion containing polystyrene
spheres and rubber granules.
Plastimul 2K Plus
Two-component, solvent-free, quickdrying,
low-shrinkage, high flexibility
bitumen waterproofing emulsion
containing cellulose fibres.
Plastimul 2K Super
Two-component, solvent-free, quickdrying,
low-shrinkage, high-flexibility
bitumen waterproofing emulsion
containing polystyrene spheres.
Plastimul Primer
Solvent-free, bitumen primer for
treating substrates before applying
waterproofing products from the
PLASTIMUL range.
TECHNICAL DATA:
Consistency: paste.
Density: 0.65 g/cm³.
pH: 10.
Dry solids content: 60%.
Storage: 12 months.
Application temperature range: from +5°C to +30°C.
Drying time: approximately 2 days.
Resistance to water: after complete hardening
approx. 2 days.
Resistance to rain: after approx. 4 hours.
Resistance to heat (DIN 52123): ≥ 70°C.
Crack-bridging according to DIN 28052: ≥ 2 mm
at +4°C.
Consumption: 0.65 kg/m² per mm of thickness of
fresh product according to the type of substrate.
Packaging: 19.5 kg drums.
TECHNICAL DATA:
Consistency: paste
Density: 1.20 g./cm³.
pH: 10.
Dry solids content: 66%.
Storage: 12 months.
Application temperature range: from +5°C to +30°C.
Mixing ratio: comp A : comp B = 22 : 8.
Workability time: 2 hours.
Drying time: approximately 1-2 days.
Resistance to water: approx. 2 days.
Resistance to rain: after approx. 4 hours.
Resistance to heat (DIN 52123): ≥ 70°C.
Crack-bridging according to DIN 28052: ≥ 2 mm
at +4°C.
Consumption: 1.2 kg/m² per mm of thickness of fresh
product according to the type of substrate.
Packaging: 30 kg units (A+B = 22+8).
TECHNICAL DATA:
Consistency: paste.
Density: 0.75 g/cm³.
pH: 10.
Dry solids content: 66%.
Storage: 12 months.
Application temperature range: from +5°C to +30°C.
Mixing ratio: comp A: comp B = 4 : 1.
Workability time: 3 hours.
Drying time: approximately 1-2 days.
Resistance to water: approx. 2 days.
Resistance to rain: after approx. 4 hours.
Resistance to heat (DIN 52123): ≥ 70°C.
Crack-bridging according to DIN 28052: ≥ 2 mm
at +4°C.
Consumption: 0.75 kg/m² per mm of thickness of
fresh product according to the type of substrate.
Packaging: 22 kg units (A+B = 17.6 + 4.4).
TECHNICAL DATA:
Consistency: thixotropic liquid.
Density: 1 g/cm³.
pH: 10.
Dry solids content: 30%.
Storage: 12 months.
Application temperature range: from +5°C to +30°C
(temperature of substrate).
Condition of substrate: dry, slightly damp.
Application of coating products: after hardening.
Consumption: 0.2-0.3 kg/m².
Packaging: 30 kg drums.
199