Messages and Codes - e IBM Tivoli Composite - IBM

EQQWL31E EQQWL40W
EQQWL31E REROUTE ATTEMPT OF OPERATION NAMED OP, WITH APPL IA APPL FAILED
Explanation: Rerouting could not be performed for this operation. Either reroute parameters are incorrect or an
offline or failure situation caused Tivoli OPC to try to reroute an operation that is not reroutable.
System action: The operation remains in the current status. If the workstation that this operation uses is not active,
the operation is not started.
User response: If the operation should be rerouted, change the reroute parameter.
EQQWL32I NO ALTERNATE WORK STATION FOUND
Explanation: This message follows EQQWL31E. It indicates the specific problem.
System action: None.
User response: None.
EQQWL35E RESTART ATTEMPT OF OPERATION OP, IN APPL APPL FAILED
Explanation: This operation was not restarted successfully, because of incorrect restart parameters.
System action: The operation is set to RE status.
User response: Use the Modify Current Plan dialog to correct the restart parameters for this application or operation.
EQQWL40W OPERATION JOBNAME, OP IS FORCED TO ENDED IN ERROR STATUS
Explanation: A manual vary offline command was issued for the workstation on which this operation has started.
System action: The status of the operation is set to ended-in-error. The operation may be restarted or rerouted.
Any further tracking information for the operation is ignored.
Restarting or rerouting an operation that has already started may cause an integrity problem.
User response: If the Tivoli OPC reroute and restart actions are inappropriate for this operation, use the Tivoli OPC
dialog either to cancel the operation or to change its status.
Chapter 32. EQQWLnn Messages 343