Messages and Codes - e IBM Tivoli Composite - IBM

EQQA414E EQQA502E
EQQA414E 24.00 NOT ALLOWED AS A FROM-RUN TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA415E NO PREDECESSORS FOUND THAT MATCH SELECTION CRITERIA
Explanation: You tried to select predecessors for a job. No predecessors were found with the specified selection
criteria.
System action: The request is rejected.
User response: None.
EQQA416E 00.00 NOT ALLOWED AS A TO-RUN TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA418E FROM-RUN TIME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Either a run time has been entered or run cycles are missing.
User response: Specify a from-run time.
EQQA419E INTERNAL PREDECESSORS ARE NOT ALLOWED FOR JDS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
If you are currently defining a job, the application ID must be completed for a predecessor.
EQQA500E GROUP DEFINITION CANNOT HAVE OPERATIONS
Explanation: A group definition cannot contain operations.
System action: The system waits for you to respond.
User response: If operations are to be defined in this application, change the application type to A.
EQQA501W GROUP DEFINITION APPLGRID COULD NOT BE FOUND IN AD FILE
Explanation: The current application description (AD) references an application group definition that cannot be found
| in the AD database. Either you entered the wrong name, or the application group has not yet been created, or the
| application group has a pending status (not selectable for processing), or you are not authorized to reference it. If you
want to, and if you are authorized, you can save the current application description while it references an application
group that does not exist. Such an application description is not used to create occurrences in the long term plan
(LTP).
System action: The system waits for you to respond.
| User response: If you want the application description to be selected by LTP programs, enter the correct group
| definition ID, or create the referenced group definition with the application status field set to A.
EQQA502E GROUP DEFINITION ID FIELD CAN BE FILLED IN ONLY WHEN NO RUN CYCLES
Explanation: You cannot specify a group definition ID when run cycles already exist.
System action: The system waits for you to respond.
User response: Either erase the data in the group definition ID field or delete the run cycles for the application.
28 Tivoli OPC Messages and Codes