Messages and Codes - e IBM Tivoli Composite - IBM

EQQA200E OPERATION NUMBER MUST BE 1 - 255
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA201E THE VARIABLE TABLE IS NOT DEFINED TO OPC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You have tried to define a variable table ID that does not exist in Tivoli OPC's database.
EQQA202E THE RUN CYCLE TYPE IS INVALID, ENTER EITHER N, X, R OR E
Explanation: Valid run cycle types are:
N Normal offset-based run cycles.
X Negative offset-based run cycles.
R Regular rule-based run cycles.
E Exception rule-based run cycles.
System action: The request is rejected.
User response: Change the run cycle type to one of the supported values.
EQQA203E THE FREE DAY RULE SPECIFICATION IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A valid free day rule specification is any of the following:
E Free days excluded.
1 Run on the closest workday before the free day.
2 Run on the closest workday after the free day.
3 Run on the free day.
4 Do not run at all.
EQQA204E YOU HAVE ENTERED AN INVALID VALUE IN THE CATALOG MANAGEMENT FIELD.
Explanation: The only valid values in this field are Y (Yes), N (No), and D (Deferred).
System action: The system waits for you to respond.
User response: Enter a valid value.
EQQA205E THE RUN CYCLE TYPE MUST BE SPECIFIED
Explanation: Valid run cycle types are:
N Normal offset-based run cycles.
X Negative offset-based run cycles.
R Regular rule-based run cycles.
E Exception rule-based run cycles.
System action: The request is rejected.
User response: Change the run cycle type to one of the supported values.
EQQA200E EQQA205E
Chapter 3. EQQAnnn Messages 15