ProSafe 7000 Managed NETGEAR Switch Software Administration ...

ProSafe 7000 Managed Switch Release 8.0.3
c. Click Add. The Extended ACL Rule Configuration screen displays.
d. Under Extended ACL Rule Configuration (100-199), enter the following information
and make the following selections:
• In the Rule ID field, enter 1.
• For Action mode, select the Deny radio button.
• In the Match Every field, select False.
• In the Protocol Type list, select TCP.
• For TCP Flag, in the SYN field, select Set, and in the ACK field, select Clear.
e. Click Apply to save the settings.
10. Add and configure an IP extended rule that is associated with ACL 102.
a. Select Security > ACL > Advanced > IP Extended Rules. A screen similar to the
following displays.
b. Under IP Extended Rules, in the ACL ID list, select 102.
Chapter 10. ACLs
| 127