Manual DoorCom IP DCIP 650-0 - Siedle

More documents

Recommendations

Info

5 Installation DCIP 650-... 18 TaM TbM TaM TaM TaM TbM TbM TbM TaK TaM TaM TaM TaM TbK TbM TbM TbM TbM ETb ETb Li ERT ERT ERT ERT ERT BTLM Li b Tö TaK TbK c b GND Vc Tb Ta Ta Tb Vc GND b c BCMC E1- ETb input signal 4 - 30 V DC, 10 mA ERT E1+ S1 S1 SN1 SN2 + - SN2 GND SN1 c +M -M IN Tö 12 V AC min. 20 Ohm M1 IN Video bv bv+ cv cv- Da Da Db Db Tö BTM VideoIn RS232 LineOut LineIn Link IP Sa Sa red black Sb Sb Ethernet RJ45 ETH 230 V AC N N N L1 L1 L1 230 V AC 230 V AC Siedle-Vario TR 603-... BVNG 650-... PRI 602-... USB SII 650-... VNG 602-... SIVS 610-... IPVS 600-... BTSV 850-... BFSV 850-... BTCV 850-... BCMC 650-... ZBVNG 650-... BTLM 650-... BTM 650-... c) a) b) f) d) d) d) e) Device requirement Remarks
In-Home bus: Video Single line system AS-TVHa-1/1 with DCIP 650-... Functional characteristics Up to 29 PC users (Software Clients) of a network can be called from the door station. Calling, speech and door release via the Software Client DCIP SC 600-... . The Software Client must be installed on every PC which receives calls. Call functions of the Software Client 3-tone chime as standard, a dedicated *.wav file can be assigned for each call tone. It is not possible to listen in to an existing call from other PC users in the network. The door is opened by the called PC user using a “virtual door release button”, the light switching function is actuated using a “virtual light button”. The door call can be muted with an optical display on the monitor. Supplementary functions • Additional PC users can be implemented with an additional line. • Up to 10 PC users can be called in parallel with a call button from the door station. Up to 49/45 PC users are possible at one IPVS... . Reduction to 45 PC users can result if 10 or more PC users are configured as parallel devices. Remarks a) The TR 603-... (12 V AC, 1.3 A) can supply 1 door release button and max. 24 bus call button modules with LED lighting (BTM 650-01, -02, -03 and -04). With more than 24 illuminated bus call button modules, an additional TR 603-... is required. Current consumers in the AS diagram: Door release appr. 600 mA Camera heating 100 mA LED lighting Per bus call button module 25 mA b) Door release contact load in the bus video line rectifier BVNG 650-... max. 15 V AC, 30 V DC, 2 A. • Light contact load in the bus video line rectifier max. 15 V AC, 30 V DC, 2 A. c) Door release 12 V AC, use at least 20 Ohm, (e.g. TÖ 615-...), for possible connection variants see chapter 8, page 80. f) Distance of the BVNG 650-.../ SII 650-... to the door station max. 100 m with J-Y(ST)Y 0.8 mm core material. During installation, ensure that the door release is laid in a separate cable. Supply voltage available from SIVS 610-... at the terminals bv+/cv- 15 V DC, max. 300 mA. 19
Page 1 and 2: Manual DoorCom IP DCIP 650-0
Page 3 and 4: 1 System description DoorCom IP 650
Page 5 and 6: Autocommunication via the telephone
Page 7 and 8: USB The universal serial bus (USB)
Page 9 and 10: 4 Components for DC IP 650-... Inpu
Page 12 and 13: 4 Components for DC IP 650-... Inte
Page 14 and 15: 5 Terminals DCIP 650-... 14 a b c d
Page 16 and 17: 5 Terminals SIVS 610-0 Block diagra
Page 20 and 21: 5 Installation DCIP 650-... 20 TaK
Page 22 and 23: 5 Installation DCIP 650-... 22 TaK
Page 24 and 25: 6 Commissioning DCIP 650-... A numb
Page 26 and 27: 7 Client-Software DCIP SC 600-... I
Page 29 and 30: 7 DoorCom DCA 740-01 The DoorCom An
Page 31 and 32: 10 Glossary Index Terminals 14 Wiri

Manual DoorCom IP DCIP 650-0 - Siedle

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?