05.03.2013 Views

Manual DoorCom IP DCIP 650-0 - Siedle

Manual DoorCom IP DCIP 650-0 - Siedle

Manual DoorCom IP DCIP 650-0 - Siedle

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

7 Client-Software<br />

DC<strong>IP</strong> SC 600-...<br />

Installation of the Software<br />

Clients<br />

The Software Client DC<strong>IP</strong> SC 600-...<br />

(Ver. 1.1. or higher)<br />

must be installed on each PC which<br />

is intended to receive door calls. The<br />

Software Client communicates with<br />

the remote station, the DC<strong>IP</strong> <strong>650</strong>-...<br />

Following the installation, the<br />

file (*.dcip) generated by the bus<br />

programming software BPS <strong>650</strong>-...<br />

must be imported. The addresses<br />

to which the client is intended<br />

to respond are selected from the<br />

imported file.<br />

System requirements<br />

for the Software Client<br />

• Operating system Microsoft<br />

Windows XP/Vista 32/64 Bit with the<br />

latest service packs,<br />

Windows 7 32/64 Bit<br />

• Computer Pentium IV from 2 GHz<br />

with a storage capacity of at least<br />

1 GB RAM, (64 Bit min. 2 GB RAM)<br />

• Graphic card with at least<br />

1024x768, 16 bit colour depth<br />

and latest driver updates, Nvidia<br />

Geforce6600, Nvidia Quadro<br />

FX1400, ATI RADEON 9800/X600/<br />

X800,<br />

• 100 Mbit Ethernet card<br />

• Sound card and<br />

• Microsoft DirectX 9.0c.<br />

Procedure for installation<br />

• Install the DC<strong>IP</strong> SC 600 software<br />

• It may be necessary to install<br />

additional programs such as<br />

Microsoft DirectX Version 9.0c.<br />

• Start the Software Client<br />

• The Software Client configuration<br />

can be opened by pressing the righthand<br />

mouse button on the virtual<br />

in-house telephone.<br />

• In the first tab Configuration,<br />

select add DC<strong>IP</strong> SC file and<br />

import the file exported by the<br />

configuration software (*.dcip).<br />

• It is then possible under<br />

DC<strong>IP</strong> SC-Edit file to assign an IWA<br />

address to the Software Client for<br />

the relevant DC<strong>IP</strong> <strong>650</strong>-..., to which<br />

you wish the PC to respond.<br />

• Other IWA addresses can<br />

optionally be assigned to the<br />

26<br />

Software Client 2. (e.g. for receiving<br />

an additional door call).<br />

Licence regulations<br />

For each installation of the Software<br />

Client on a PC, a licence is required<br />

for the DC<strong>IP</strong> SC 600-0.<br />

The standard ex works DC<strong>IP</strong> <strong>650</strong>-...<br />

includes 4 licences. Any additional<br />

licences required must be<br />

subsequently purchased.<br />

Audio transmission<br />

The quality of the audio transmission<br />

via the Software Client<br />

DC<strong>IP</strong> SC 600-0 at the PC depends<br />

largely on the equipment of the PC<br />

or the sound card used in it, and<br />

consequently cannot be directly<br />

influenced by the PC software. If a<br />

secured audio transmission in TC<br />

quality is required, or if an audio<br />

connection must always be possible<br />

to and from the door irrespective of<br />

your network or the status of the<br />

PC, then we recommend using our<br />

DCA 740-01.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!