ATTIX 751-01/-11 - Nilfisk-ALTO
ATTIX 751-01/-11 - Nilfisk-ALTO
ATTIX 751-01/-11 - Nilfisk-ALTO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Nilfisk</strong><br />
<strong>ALTO</strong><br />
Attix7_ver.1.0_14<strong>01</strong>05<br />
E<br />
1 ESD (electrostatic discharge) - Touch the protective con<br />
ductor to discharge sta<br />
tic from your own body.<br />
- Possibly wear an antistatic<br />
wrist strap.<br />
- Use a conductive floortabletop.<br />
- Never touch a circuit<br />
board or electronic com<br />
ponents, always hold<br />
2 Troubleshooting on unit<br />
Observe the following<br />
ESD precautions before<br />
any repairs to electronic<br />
circuitry:<br />
2.1 Unit will not work<br />
(all units with brush motor) Start:<br />
line voltage must be present<br />
and plug must be plugged<br />
in.<br />
Voltage applied to<br />
switch?<br />
Yes<br />
Do electronics work?<br />
Yes<br />
Check plug and power<br />
cord, replace if<br />
necessary.<br />
Replace electronics.<br />
Does motor work? No Repair or replace motor.<br />
Yes<br />
Troubleshooting<br />
No<br />
No<br />
Does cleaner work?<br />
them by the plastic or in<br />
sulation.<br />
- Transport electronic<br />
parts in conductive pa<br />
ckaging (e.g. Special<br />
ESD packages).<br />
No<br />
Conduct safety chec k.<br />
22/59<br />
Yes<br />
Troubleshooting