Nokia Mobile VPN

More documents

Recommendations

Info

Move to IPsec tab. Scroll down to the bottom of the page. Clear the Mode Configuration check mark to disable that feature. It is not used with CRACK and certificate authentication in mobile <strong>VPN</strong>. The Base Group contains settings, which will be inherited to other groups by default. By doing these settings, other groups do not need to be edited. Click Apply to complete this configuration.
Defining policies for CRACK authentication Navigate to Configuration | Tunneling and Security | IPSec | NAT Transparency. Check the box next to “IPSec over NAT-T”. Click “Apply”.
Page 1 and 2: Nokia Mobile VPN How to configure N
Page 3 and 4: Introduction This document is based
Page 5 and 6: Certificate management Importing CA
Page 7 and 8: Select the certificate file and cli
Page 9 and 10: Enrolling identity certificate Clic
Page 11 and 12: Here is a sample of the certificate
Page 13 and 14: Certificate Management screen shoul
Page 15 and 16: Enter the address range for this IP
Page 17: DNS server configuration Navigate t
Page 21 and 22: Enter the name of the SA (“CRACK_
Page 23 and 24: In the Identity tab, enter the name
Page 25 and 26: Navigate to Configuration | User Ma
Page 27 and 28: Creating VPN client policy Before t
Page 29 and 30: Defining policies for certificate a
Page 31 and 32: From the “Inactive Proposals” l
Page 33 and 34: Enter the name of the SA (“CERT_S
Page 35 and 36: Defining user group for certificate
Page 37 and 38: Navigate to Configuration | Policy
Page 39 and 40: Add the correct VPN gateway address

Nokia Mobile VPN

Create successful ePaper yourself

Delete template?

Save as template?