frequency-converter mfr 22 - 600a / 1500a - PS Antriebstechnik

More documents

Recommendations

Info

4.3 Control by external current 0...20mA DC ( 4 ... 20mA DC ): 4.4 Use of the enable-loop to provide 4.5 control by 2 keys thermal protection of the motor: in the mode `Motorpot`: 6 Technical Documentation Frequency inverter MFR-<strong>22</strong>/600/1500 Version 1.0 11.09.07
5. Start of operation, adjustments Because of the fact, that an adjustment is impossible if the drive is assembled, parameters and limits must be adjusted before assembling. It is recommended to make the requ. adjustments within the incoming inspection. For OEM applications we offer as a special service without additional costs to make the adjustments within the final inspections in our house. 5.1 Position of the jumpers: Prior to the assembling there is only the selection of the desired control signal necessary: B1 inserted, B2 not inserted: Control by current 0…20mA DC B1 and B2 not inserted: Control by voltage 0…10V DC or potentiometer B1 and B2 inserted: Control by current 4…20mA DC 7 Technical Documentation Frequency inverter MFR-<strong>22</strong>/600/1500 Version 1.0 11.09.07
Page 1 and 2: Contents: FREQUENCY-CONVERTER MFR 2
Page 3 and 4: The operation - mode ‘200 Hz’ l
Page 5: 3. Function of the ramp - generator

frequency-converter mfr 22 - 600a / 1500a - PS Antriebstechnik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?