PLEASE READ BEFORE REFILLING CARTRIDGES - IMS-Ink
PLEASE READ BEFORE REFILLING CARTRIDGES - IMS-Ink
PLEASE READ BEFORE REFILLING CARTRIDGES - IMS-Ink
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
APPLE: M4609, M8041, M8052<br />
BROTHER: IN-10<br />
CANON: BC-01, BC-02, BC-05, BX-2<br />
1. Locate vent plug on right side of black cartridges. Insert eye screw<br />
(included) into plug impression. Tilt plug back and forth and pull<br />
to remove plug. For color cartridges there are three vent<br />
plugs to remove. Remove, fill with ink, then re-insert vent plug<br />
for each color one at a time to avoid cross contamination.<br />
2. Remove cap from filler needle of ink refill bottle.<br />
3. Insert needle of correct color ink refill bottle into hole where vent<br />
plug removed. Pull needle back slightly then very slowly squeeze<br />
refill bottle to allow ink to flow into cartridge.<br />
4. Stop filling when ink bubbles from fill hole. DO NOT OVERFILL.<br />
Replace cap from filler needle of refill bottle.<br />
5. Blot away excess ink with a paper towel.<br />
6. Re-insert plug into vent plug hole. Push in gently until slightly<br />
below cartridge surface.<br />
7. Replace cap from filler needle of refill bottle.<br />
NOTE: An overfilled cartridge will leak out the printhead.<br />
Place printhead on a paper towel for a few minutes until leaking stops.<br />
BK<br />
Y M C<br />
www.ims-ink.com 13
Change language