You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
suitable<br />
partly suitable<br />
not suitable<br />
10<br />
Micro spraying technology<br />
Designation Viscosity<br />
MULTICUT<br />
MICRO SP 51<br />
MULTICUT<br />
MICRO 110<br />
MULTICUT<br />
MICRO R 40<br />
MULTICUT<br />
MICRO 15<br />
MULTICUT<br />
MICRO 20<br />
48<br />
110<br />
35<br />
18<br />
21<br />
mm 2 /s/40°C<br />
Micro spraying technology – chlorine free<br />
Free-cutting<br />
mild steels<br />
Case hardened +<br />
tempered steels<br />
Stainless + acidresistant<br />
steels<br />
Aluminium<br />
Non-ferrous<br />
heavy metals<br />
Applications<br />
A fully synthetic product with<br />
extreme pressure active ingredients.<br />
This type is used for machining steel as<br />
well as aluminium. Excellent results for<br />
example are attained when deep drilling<br />
aluminium. The product is used for<br />
metal removal as well as noncutting<br />
machining procedures are carried out.<br />
MULTICUT MICRO SP 51 fulfils the<br />
requirements of the DBL BQF 6768.15<br />
from DaimlerChrysler AG.<br />
MULTICUT MICRO 110 is a full synthetic<br />
oil developed for demanding requirements<br />
and in use with micro spraying<br />
systems. Alloyed with extreme pressure<br />
additives it is optimised for machining<br />
of steels and aluminium. Special<br />
components provide an optimal drop<br />
size distribution.<br />
MULTICUT MICRO R 40 is an alloyed<br />
product on native basis for demanding<br />
requirements. Due to its alloy layer this<br />
product is used for aluminium and steel<br />
processing, e.g. when sawing steel<br />
tubes or for thread rolling in steel.<br />
Fully synthetic products used mainly<br />
for aluminium working, e.g. sawing<br />
and milling of aluminium profiles or<br />
aluminium cylinder heads in the<br />
automotive industry.<br />
MULTICUT MICRO 15 is also used for<br />
lubrication and working of glass<br />
materials as well as for lubricating micro<br />
measuring equipment. Even at high temperatures<br />
the product does not resinify.<br />
MULTICUT MICRO 20 is also used in<br />
steel processing. The product evaporates<br />
at temperatures above 190 °C.