MULTICUT® - Zeller+Gmelin

suitable
partly suitable
not suitable
14
Punching and precision blanking oils
Designation Viscosity
MULTICUT
STAMP 60
MULTICUT
STAMP 130
MULTICUT
STAMP E 80
MULTICUT
STAMP CL 60
MULTICUT
STAMP CL 140
60
130
80
60
140
mm 2 /s/40°C
Free-cutting
mild steels
Case hardened +
tempered steels
Punching and precision blanking oils – free from chlorine
Punching and precision blanking oils – containing chlorine
Stainless + acidresistant
steels
Aluminium
Non-ferrous
heavy metals
Applications
Punching and precision blanking oil for
all kinds of steel sheets , also for thicker
materials.
Highly alloyed punching and precision
blanking oil for processing thicker
steels and medium to difficult part
geometries.
Punching and precision blanking oil
with a high degree of additives for processing
highly alloyed steels with
greater material thicknesses and
difficult part geometries. This red coloured
product is free from mineral oil.
Chlorine containing products can be
replaced by MULTICUT STAMP E 80.
Punching and precision blanking oils
with a high degree of additives for
highest requirements. Suitable for
highly alloyed steels with greater
material thicknesses and difficult part
geometries.
Positive experiences have been made with the products of our MULTIDRAW AL range when
punching mainly aluminium, steel and non-ferrous heavy metals with thickness’ up to
approx. 2 mm. These are fully synthetic punching and drawing oils, which evaporate rapidly
after the machining process and leave a dry or thin lubricated film depending upon the type.
Please ask for the corresponding documentation on these products. They are
MULTIDRAW AL 2094
MULTIDRAW AL 2474
MULTIDRAW AL 2066 MULTIDRAW AL 65
MULTIDRAW AL 9068 MULTIDRAW AL 9635 MULTIDRAW AL 73